imperii RR FIERRO SmartWatch XROS Instruction Manual

imperii RR FIERRO SmartWatch XROS Instruction Manual

Thank you for choosing our product!

To have a comprehensive understanding and using this device, to know all the features and simple operation method, please read this manual first.
This equipment is mainly matching with smart phone via bluetooth connection .firstly you need to download the “FundoBracelet” APP in your cell phone, and then connect the bluetooth of the watch and the cell phone. once the connection is successful, you can sync the date and time in the phone,also you can sync the data in the watch into the APP in the cell phone. The detail of the bluetooth connection please refer the below point 4.
Our company reserve the right of modify the content of the manual without prior notice.

Power On/Off

Power On

Press button B & C together for 3 seconds

Power Off

Press button B & C together for 3 seconds

Functional Modes

incoming message alert

Connect the watch and the mobile phone via Bluetooth and enable notification in the “more” section of the App. When the mobile phone receives incoming message, the notification will be pushed to the watch, with deep sound and blinking icon.

Incoming Call Alert

Connect the watch and the mobile phone via Bluetooth and enable notification in the “more” section of the App. When the mobile phone receives incoming call, the notification will be pushed to the watch, with deep sound and blinking icon.

Remote control photo-taking

Connect the watch and the mobile phone via Bluetooth, open the mobile phone camera through the “more” section in the App. Press button B&C (MODE+START button) together shortly for remote control photo-taking.

Manual Time Setting: Under time display mode, press and hold button D for 3 seconds to enter time setting, then press button A and C to adjust time. Short press on button D to switch. Short Press button B to save the setting and exit.

Display backlight

Press button A under any mode to light up EL backlight for 3 seconds. (frequent use of backlight, will increase the consumption of electricity).

Press button B to switch modes, the sequence of the modes is as follows:

1. Date display mode
2. Pedometer display mode
3. Calorie consumption display and Walking distance display mode
4. Alarm display mode;
5. StopWatch mode
6. Temperature display mode
7. Barometric pressure display mode
8. Ultraviolet index display mode.

Display mode:

Under date display mode, long press and hold button D for 3 seconds to enter date setting, and short press button A and C to adjust digit. Short press A to subtract “1”, short press C to Plus “1”. Short press button D to switch and press button B to exit date setting.

Alarm display mode

Long press button D for 3 seconds to set alarm,, then press button A and C to ON/Off, beep for turning on, press button D to switch and button, B to save the alarm set. When the alarm time set is on, the blinking alarm icon and beep sound will remind the user. Press any button to stop alarm.

Pedometer display made:

Calorie consumption display mode

Stopwatch Mode:

After entering stopwatch mode, press button C to start or pause stopwatch.
Data reset: short press button D to reset the data when in pause status.

Walking distance display mode:

Under walking distance display mode, press button C can switch between KM and Mile (default as KM).

Temperature display mode:

Barometric pressure and altitude display mode:

Press button C to switch between Pa and Meter display (default as Pa).

Ultraviolet index display mode:

Turn On/Off Bluetooth Connection

Long press button A for 3 seconds, the Bluetooth connection Icon blinks, that means the watch’s Bluetooth is turned on and is ready. If the icon is always on, that means Bluetooth connection is OK. If Bluetooth between the mobile phone and the watch disconnects and fails to connect again in 30 minutes, the watch’s Bluetooth will be turned off automatically. TO turn on Bluetooth again, press and hold button A for 3 seconds.

Use of APP

1. Download in App Store: Android System: search “FundoBracelet” And download from Google Play App store; iOS System: Search “FundoBracelet” and download form Apple Store;

2. Scan the app’s tow-dimension code to download:
   
   Android
   
   IOS

3. Sistema Android: Utilize QQ, Wechat.
   Sistem iOs: Utilze QQ, Wechat
   Android: “FundoBracelet”
   Apple: “FundoBracelet”
   After the installation is complete, icon as shown in figure:

FundoBracelet Account Log in:

On the “Me” interface, click “Login” through “Visitors login” or third-party accounts such as QQ and wechat or click “Register”  to login with your email account.

Connect and bind the smart watch

When use the app to connect F2 smart watch, please turn on the Bluetooth of the mobile phone and smart watch. After log in the app, click “bluetooth connection” > click “SEARCHING” >choose”SW80″ to bind the watch.

Smart watch version updationg

Smart watch and “FundoBracelet” App in a state of bluetooth connection. Click “solid upgrade” in “Me” interface, then you can update the software of the smart watch.

Function description of the FundoBracelet app:

After successfully connect the, watch with the mobile phone, you can, check more  functions in the app:

• Finding bracelet.
• Intelligent synchronization of the sports data on the watch and app.
• intelligent synchronization of the attitude and barometric pressure data on the watch and app.
• intelligent synchronization of the ultraviolet index and temperature data on the watch and app.
• Intelligent synchronization of the mobile phone’s time, date and alarm, and sedentary remind on the watch and app.
• Notification of incoming calls. short messages, QQ messages , WeChat, Facebook ,messenger, WhasApp, Twitter, Instagram and Linkedin messages.
• Use the mobile phone to take photos by remote control.
• Watch with date memory function. 30 days health data saving;
• Share exercise data. with friends via WeChat and QQ.

Changing battery

When the low battery sign shows on the watch, suggest charging the battery In l5 days. Unscrew the four
screws by screwdriver at the back of the watch remove old battery and install new battery. Note the polarity
of the battery; lock mews

Notifications:

1. Support devices which with Bluetooth 4.0 and with the version of Android 4.3 or iOS 7.0 and above.
2. If log in failed, try different ways to logging in, such as QQ, wechat and Email account, at the same time please confirm whether network anomalies.
3. Bluetooth Connection:
4. Please make sure the bluetooth of mobile phone and the watch is turned on. if Bluetooth connection icon blinks, the watch’s Bluetooth is turned on and is ready. If the Icon is always on, Bluetooth connection is OK. If there is no bluetooth icon, bluetooth is turned off.
5. When searching Bluetooth, please make sure the watch has not been bind by another account.
6. When searching Bluetooth please make sure the watch and mobile phone are nearby.
7. If the watch is not receiving message notification, please make sure the APP is logged in and message notification function is turned on.
8. if the exercise and sleep data are not synchronized to App, please try disconnect the Bluetooth and connect again through the App.
9. When Bluetooth connection abnormal and unable to enter the APP. Please try to enter into the Application Management of the Mobile phone and clear the cache data of the App.
10. If watches and cell phone bluetooth connection often disconnected automatically. Please check if the phone is equipped with a software which will clean up the background program and clean up the App by mistake. You need to “lock” the App in the phone, or unload the firmware to make sure the APP can stable running in the background.
11. of the one watch has beenbind with one account, it cannot be bind with another account unless it is unbind with the current account.
12. when unbinding, the bluetooth of the watch and the cell phone must be connected.
13. When Unbinding the watch with the current account under iOS 9 above system, click “unbinding device” there will be notification come up and click “settings” to unpair the watch through Bluetooth setting; when unbinding the watch under iOS 10 above system, click “ unbinding device” need to unpair the watch manually through Bluetooth setting.

Technical Service:

Visit: http://www.imperiielectronics.com/contactus

imperii RR FIERRO SmartWatch XROS Instruction Manual – Download [optimized]
imperii RR FIERRO SmartWatch XROS Instruction Manual – Download
imperii RR FIERRO SmartWatch XROS Instruction Manual – OCR PDF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>