SecureEntry-CR60LF RFID Card Access Control Reader User Manual
- July 4, 2024
- SecureEntry
Table of Contents
SecureEntry-CR60LF RFID Card Access Control Reader
Product Features
- RFID Card Access Control Reader
- Supports Wiegand 26/34 interface
- LED and BEEP indicators for access status
- RS485 communication interface
Installation
- Use a Phillips-type screwdriver to loosen the screw between the panel and the motherboard.
- Attach the motherboard to the sidewall with a plastic plug and screws.
Connection Diagram
| Wire Color | Description |
|---|---|
| Red | 16V Power |
| Black | GND (Ground) |
| Green | D0 Data Line |
| White | D1 Data Line |
Installation Comments
- Check the electrical voltage (DC 9V – 16V) and distinguish the positive anode and cathode of the power supply.
- When using external power, connect the GND power supply to the controller panel.
- Use an 8-wire twisted pair cable to connect the reader with the controller.
Frequently Asked Questions
Q: What is the recommended cable length for connecting the reader with the controller?
A: The cable length should not exceed 100 meters to ensure proper functionality.
Q: Can I use a different type of cable instead of twisted pair for connection?
A: It is recommended to use a twisted pair cable for optimal performance. However, you can also use shielded wire for connecting GND and a two-core cable for improved efficiency.
Specifications
- Warranty: 1 year
- Material: zinc alloy
- Device Type: RFID reader with access control
- Operating frequency: 125 kHz
- Verification Type: RFID Card
- Response Speed: Less than 0.2 seconds
- Reading distance: 2-10cm, depending on the card or tag
- Light Signal: Bi-color LED
- Beep: Built-in speaker (buzzer)
- Communication Distance: 100 meters
- Data transfer: real-time
- Operating voltage: DC 9V – 16V, standard 12V
- Working Current: 70mA
- Interface: Wiegand 26 or 34
- Operating Temperature: -25º C – 75º C
- Operating Humidity: 10%-90%
- Product dimensions: 8.6 x 8.6 x 8.2 cm
- Package dimensions: 10.5 x 9.6 x 3 cm
- Product weight: 100 g
- Package weight: 250 g
Set contents
- RFID Access Control Reader
- Jumper cables
- Special Key
- Manual
Features
- Compact shape and elegant design
- Can be connected with an electric or electromagnetic lock or a time and attendance recorder
- Verification via RFID card
Installation
- Use a Phillips-type screwdriver to loosen the screw between the panel and the motherboard. Next, attach the motherboard to the sidewall with a plastic plug and screws.
Connection diagram
| Wiegand 26/34 | RS485 | RS232 |
|---|---|---|
| Red | DC 9V – |
16V
| Red| DC 9V –
16V
| Red| DC 9V –
16V
Black| GND| Black| GND| Black| GND
Green| D0| Green| 4R+| |
White| D1| White| 4R-| White| TX
Blue| LED| | | |
Yellow| BEEP| | | |
Grey| 26/34| | | |
Orange| Bell| | | |
Brown| Bell| | | |
Comments
- Check the electrical voltage (DC 9V – 16V) and distinguish the positive anode and cathode of the power supply.
- When external power is used, we suggest using the same GND power supply with the controller panel.
- The cable connects the reader with the controller, we recommend using an 8-wire twisted pair cable. The Data1Data0 data cable is a twisted pair cable, we suggest that the cross-sectional area should be at least 0.22 square millimeters.
- The length should not exceed 100 meters.
- The shielded wire connects GND, and the two-core cable will improve the reader’s working efficiency (or the use of a multi-core AVAYA cable).
Documents / Resources
|
SecureEntry SecureEntry-CR60LF RFID Card Access Control
Reader
[pdf] User Manual
CR60LF, SecureEntry-CR60LF RFID Card Access Control Reader, SecureEntry-
CR60LF, SecureEntry-CR60LF Control Reader, RFID Card Access Control Reader,
RFID Card Access, Control Reader, RFID, Card Access
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>