STERLING 77311100 72 x 42 Air Massage Bath Owner’s Manual
- July 3, 2024
- STERLING
Table of Contents
STERLING 77311100 72 x 42 Air Massage Bath
Specifications
- Dimensions: 72 x 42 inches
- Weight: 92 lbs (41.7 kg)
- Water Capacity: 80 gallons (302.8 L)
- Electrical Requirements: Blower – 120 V, 9.2 A, 60 Hz; Heater – 300 W
Product Information
The 72 x 42 air massage bath 77311100 features armrests, a contoured backrest, and lumbar support for added comfort. The material used ensures lasting beauty.
Installation
Install the product according to the provided installation instructions.
Ensure proper electrical service with a dedicated circuit protected by a
Ground-Fault circuit interrupter (GFCI).
Recommended Products/Accessories
Consider using the 71317100 Tile-in flange kit for 72 soaking baths for
installation.
Codes/Standards
- Complies with ASME, CSA, IAPMO, ASTM, UL, and CSA standards.
- Refer to the website for detailed warranty information.
Notes
- Provide one grounded electrical outlet within 24 inches of each component.
- Size the drain cutout to fit the drain assembly that will be used.
- Blower service access is required.
Features
- 15-1/4″ soaking depth
- Reversible drain can be installed as left- or right-hand drain
- Suitable for tile-down applications
- Air Massage, three-speed blower, integrated heater, arched armrests, contoured backrest and lumbar support
Material
- Made from solid Vikrell® material for strength, durability, and lasting beauty
Installation
- Drop-in
Recommended Products/Accessories
71317100 Tile-in flange kit for 72″ soaking baths
Codes/Standards
- ASME A112.19.7/CSA B45.10
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- UL 1795
- CSA C22.2 No. 218.2
STERLING® Vikrell® or Acrylic Baths and Shower Bases Ten-Year Limited
Warranty
See the website for detailed warranty information.
DIMENSION
Required Electrical Service
One dedicated circuit is required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI). Outside North America, this device may be known as
a Residual Current Device (RCD).
Blower, Heater: 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
- Drain location: Reversible
- Basin area, bottom: 50″ x 25-5/8″ (1270 mm x 651 mm)
- Basin area, top : 59″ x 33″ (1499 mm x 838 mm)
- Weight: 92 lbs (41.7 kg)
- Minimum floor load: 41 lbs/ft² (200.2 kg/m²)
- Water depth: 15-1/4″ (387 mm)
- Water capacity: 80 gal (302.8 L)
- Electrical component rating:
- Blower: 120 V, 9.2 A, 60 Hz
- Heater: 300 W
- Minimum flat for door: 3″ (76 mm)
Notes
- Install this product according to the installation instructions.
- Provide one grounded electrical outlet within 24″ (610 mm) of each component.
- Size the drain cutout to fit the drain assembly that will be used.
- Blower service access is required.
- End stud positioning is critical if nailing-in flanges are to be used.
- Studs should be positioned roughly as shown for support clip or roofing nail installation.
1-800-STERLING (1-800-783-7546)
- Kohler Co. reserves the right to make revisions without notice to product specifications.
- For the most current Specification Sheet, go to www.sterlingplumbing.com. 3-26-2024 20:48 – US
Frequently Asked Questions
- Q: What is the water depth of the air massage bath?
- A: The water depth is 15-1/4 inches (387 mm).
- Q: What is the weight capacity of the bath?
- A: The bath can hold up to 80 gallons (302.8 L) of water.
- Q: What are the electrical requirements for the blower and heater?
- A: The blower requires 120 V, 9.2 A, 60 Hz, and the heater requires 300 W.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>