STERLING 76311100 Whirlpool Bath Owner’s Manual
- July 3, 2024
- STERLING
Table of Contents
STERLING 76311100 Whirlpool Bath
Specifications
- Dimensions: 72 x 42 inches
- Weight: 112 lbs (50.8 kg)
- Water Depth : 15-1/4 inches (387 mm)
- Water Capacity: 80 gallons (302.8 L)
- Electrical Component Pump Rating: 120 V, 7 A, 60 Hz
Product Information
The 72 x 42 whirlpool bath model 76311100 features lumbar support for added comfort and is designed for lasting beauty.
Installation
- Install the product according to the provided installation instructions. Ensure there is one grounded electrical outlet within 24 inches of each component.
- Measure your actual product for roughing-in details and size the drain cutout to fit the drain assembly that will be used.
Recommended Products/Accessories
Consider using the 71317100 Tile-in flange kit for 72 soaking baths for
installation purposes.
Codes/Standards
Complies with ASME A112.19.7/CSA B45.10, CSA B45.5/IAPMO Z124, ASTM E162,
ASTM E662, UL 1795, IAPMO Certification, and UL Listed standards.
Technical Information
- All product dimensions are nominal. The drain location is reversible, and the basin area dimensions are provided.
- The pump requires one dedicated circuit protected with a Class A Ground-Fault circuit interrupter (GFCI).
Notes
- The pump is supplied with a grounding-type plug-in cord.
- A pump motor/control access panel is required.
- End stud positioning is critical for nailing in flanges.
- Studs should be positioned as shown for support clip or roofing nail installation.
DIMENSION
Required Electrical Service
One dedicated circuit is required, protected with Class A GroundFault Circuit-
Interrupter (GFCI). Outside North America, this device may be known as a
Residual Current Device (RCD).
- Pump: 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
- Drain location: Reversible
- Basin area, bottom: 50″ x 25-5/8″ (1270 mm x 651 mm)
- Basin area, top : 59″ x 33″ (1499 mm x 838 mm)
- Weight: 112 lbs (50.8 kg)
- Water depth: 15-1/4″ (387 mm)
- Water capacity : 80 gal (302.8 L)
- Electrical component rating:
- Pump: 120 V, 7 A, 60 Hz
- Pump speed: Single
- Minimum flat for door: 3″ (76 mm)
Notes
- Install this product according to the installation instructions.
- Provide one grounded electrical outlet within 24″ (610 mm) of each component.
- Measure your actual product for roughing-in details.
- Pump is supplied with a grounding-type plug-in cord.
- A pump motor/control access panel is required. Size the drain cutout to fit the drain assembly that will be used.
- End stud positioning is critical if nailing-in flanges are to be used.
- Studs should be positioned roughly as shown for support clip or roofing nail installation.
MORE INFORMATION
- 1-800-STERLING (1-800-783-7546)
- Kohler Co. reserves the right to make revisions without notice to product specifications.
- For the most current Specification Sheet, go to www.sterlingplumbing.com.
- 3-26-2024 20:09 – US
FAQ
- Q: What electrical service is required for the pump?
- A: The pump requires 120 V, 15 A, 60 Hz electrical service on a dedicated circuit protected with a Class A GFCI.
- Q: What is the weight and water capacity of the whirlpool bath?
- A: The whirlpool bath weighs 112 lbs (50.8 kg) and has a water capacity of 80 gallons (302.8 L).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>