BLUSTREAM POC11 HDBaseT PoC Injector User Manual
- July 3, 2024
- BLUSTREAM
Table of Contents
BLUSTREAM POC11 HDBaseT PoC Injector
Specifications
- Product Name: POC11
- Power Input: 24V/1.25A DC
- Compatibility: Blustream HDBaseT products
- Remote Power Options: 12V, 24V, PoC OFF
- Maximum Cable Distance: POC11 to TX – 30m, POC11 to RX – 70m
Product Usage Instructions
Introduction
The POC11 HDBaseTTM PoC injector sends remote power to Blustream HDBaseT products using Power over Cable. It allows remote powering of a Blustream HDBaseT Transmitter via selectable 12V or 24V DC.
Front Panel Description
- Power Status LED: Illuminates when the device is powered on
- Voltage Selection: Switch between 12V, 24V, or PoC OFF for remote power of HDBaseT Transmitter
- HDBaseT input: Connect to Blustream HDBaseT Transmitter product
- 12V / 24V Status LED: Indicates current voltage selection
Rear Panel Description
- HDBaseT output: Connect to HDBaseT Receiver product
- 12V / 24V Status LED: Indicates current voltage selection
- Power Port: Use 24V/1.25A DC power adaptor (included)
PoC Distance Limitations
- The maximum cable distance from the Blustream HDBase Transmitter to the POC11 is 30m. The combined distance from the
- Transmitter, via POC11, to the Receiver is subject to HDBaseT IC in the products. Refer to the manual for specific distances.
FAQ
Q: Can the POC11 be used with non-Blustream HDBaseT extenders?
A: The POC11 is designed for use with Blustream products and may not work with other HDBaseT extenders on the market.
Q: What is the purpose of the surge protection device recommended?
A: The surge protection system is highly recommended to protect sensitive electrical components in the product from electrical spikes, surges, and lightning strikes, ensuring equipment longevity.
Thank you for purchasing this product
- For optimum performance and safety, please read these instructions carefully before connecting, operating, or adjusting this product.
- Please keep this manual for future reference.
Surge Protection Device Recommended
- This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shocks, lightning strikes, etc.
- Use of surge protection systems is highly recommended to protect and extend the life of your equipment.
Introduction
- The POC11 HDBaseT™ PoC injector is designed to send remote power to Blustream HDBaseT products that operate using Power over Cable.
- When placed within an HDBaseT Transmission line, it allows a Blustream HDBaseT Transmitter to be remotely powered via selectable 12V or 24V DC.
- In-line PoC (Power over Cable) injector to power Blustream HDBaseT Transmitter products
- Compatible with all Blustream HDBaseT™ video solutions (HDBaseT spec 1.0, 2.0 and 3.0)
- Supports 18Gbps 4K signals, multi-channel audio formats, and HDCP 2.2
- Supports up to 100m cable distance *
- Selectable voltage between 12V or 24V
- Cable distance is subject to the location of POC11, and Blustream HDBaseT product being installed. POC11 to TX distance max 30mtrs. POC11 to RX distance max 70mtrs.
- Please refer to the “PoC Distance Limitations” section for further details
- Please note, that the POC11 is designed for use with Blustream products and may not work with other HDBaseT extenders on the market
Front Panel Description
- Power Status LED – Illuminates when a device is powered on
- Voltage Selection – used to switch between 12V, 24V, or PoC OFF, for remote power of HDBaseT Transmitter connected to input
- HD Base input – Connect to Blustream HDBaseT Transmitter product
- 12V / 24V Status LED – Illuminates either 12V or 24V LED to show current voltage selection
Rear Panel Description
- HD Base output – Connect to HDBaseT Receiver product
- 12V / 24V Status LED – Illuminates either 12V or 24V LED to show current voltage selection
- Power Port – Use 24V/1.25A DC power adaptor (included)
PoC Distance Limitations
- The POC11 can be configured to provide either 12V or 24V PoC to connected Blustream HDBaseT Transmitter products. This solution has been designed specifically for use with Blustream HDBaseT wall plate Transmiters (HEX11WP-TX and HEX31WP-TX) when used with the Custom Pro HDBaseT Input card (PRO-IN2H2TCS) where this input card does not provide PoC to the connected Transmitter, and direct power is unavailable to the wall plate.
- It can also be used in conjunction with projectors and commercial displays that feature HDBaseT inputs, to power the connected Blustream HDBaseT wall plate Transmitter.
- The maximum cable distance from the Blustream HDBaseT Transmitter to the POC11 is 30m (regardless of the video resolution being distributed).
- The maximum combined distance from the Blustream HDBaseT Transmitter, via the POC11, and onto the
- HDBaseT Receiver product is subject to the HDBaseT IC in the HDBaseT TX and RX products. Please refer to the table below.
Please note:
- The POC11 is not an HDBaseT repeater product and does not add additional distance to the combined cable length
- The POC11 will not power the connected HDBaseT Receiver (HDBaseT Out)
- The use of joins/patch panels in the CAT cable run can limit the overall maximum distance of cabling
HDBASET TRANSMITTER| MAXIMUM COMBINED CABLE DISTANCE AT 4K
(HEX70SL-RX/RX70CS EXAMPLE)| MAXIMUM COMBINED CABLE DISTANCE AT
4K (PRO-IN2H2TCS EXAMPLE)| MAXIMUM COMBINED CABLE DISTANCE AT 4K
(HEX18G-RX/RX18G EXAMPLE)| SUPPORTED VOLTAGE (TO TX)
---|---|---|---|---
HEX11WP-TX| 40m| 40m| 40m| 12V / 24V
HEX31WP-TX| 40m| 40m| 40m| 12V / 24V
HEX70SL-TX| 40m| 40m| 40m| 12V / 24V
HEX70CS-TX| 40m| 40m| 40m| 12V
HEX70ARC-TX| 40m| 40m| 40m| 12V / 24V
HEX70USB-TX| 40m| 40m| 40m| 12V / 24V
HEX100CS-TX| 40m| 70m| 70m| 12V
HEX150CS-TX| 40m| 70m| 100m| 12V
HEX18G-TX| 40m| 70m| 100m (CAT6a F/UTP)| 12V / 24V
HEX18GARC-TX| 40m| 70m| 100m (CAT6a F/UTP)| 12V / 24V
Specifications
POC11
- Video Inputs: 1 x HDBaseT™ RJ45 connection
- Video Outputs: 1 x HDBaseT™ RJ45 connection
- Voltage Selection: 1 x 3-step switch
- Casing Dimensions (W x H x D): 65mm x 80mm x 24mm
- Shipping Weight: 0.5kg
- Operating Temperature: 32°F to 104°F (0°C to +40°C)
- Storage Temperature: -4°F to 140°F (-20°C to +60°C)
- Power Supply: 24V/1.25A DC 4-pin DIN
- NOTE: Specifications are subject to change without notice. Weights and dimensions are approximate.
Package Contents
POC11
- 1 x POC11
- 1 x Mounting kit
- 1 x 24V/1.25A DC Power Supply
- 1 x Quick Reference Guide
Certifications
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION – changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CANADA, INDUSTRY CANADA (IC) NOTICES
This Class B digital apparatus complies with Canadian ICES-003.
Operation is subject to the following two conditions:
- this device may not cause interference,
- this device must accept any interference, including interference that may cause undesired operation of the device.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed of with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
Documents / Resources
|
BLUSTREAM POC11 HDBaseT PoC
Injector
[pdf] User Manual
POC11, POC11 HDBaseT PoC Injector, POC11, HDBaseT PoC Injector, PoC Injector,
Injector
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>