ENGINUITY E1000 Portable Power Station User Manual

ENGINUITY E1000 Portable Power Station

Product Specifications:

• Product Name: Portable Power Station E1000
• Manufacturer: Not specified
• Model: E1000
• Capacity: Not specified
• Input Voltage: Not specified
• Output Voltage: Not specified
• Weight: Not specified
• Dimensions: Not specified

Product Usage Instructions

Safety Precautions:

• Read the manual carefully before using the Portable Power Station E1000.
• Always follow the manufacturer’s instructions to ensure safe operation.
• Avoid using the power station in wet conditions to prevent electric shock.
• Do not overload the power station beyond its wattage/amperage capacity.
• Keep the power station cool and away from heat sources or fire.
• Only use approved charging sources and cords to charge the power station.

Operating Instructions:

1. Place the power station on a flat, stable surface in a dry and well-ventilated area.
2. Connect the approved charging cord to the power station and then plug it into a compatible power source.
3. Charge the power station fully before initial use, following the recommended charging time provided in the manual.
4. Once charged, you can use the power station to power electronic devices by connecting them to the appropriate output ports.
5. Do not connect devices that exceed the power station’s capacity to avoid damage.
6. If the power station overheats, it will automatically shut off. Allow it to cool before using it again.

Frequently Asked Questions (FAQ):

1. Q: Can I use the Portable Power Station E1000 to charge my laptop?
   A: Yes, you can use the power station to charge laptops and other electronic devices that fall within its power capacity.
   Ensure that you use the correct adapters and cables for your specific devices.

2. Q: How long does it take to fully charge the Portable Power Station E1000?
   A: The charging time may vary depending on the current battery level and the charging source used. Refer to the manual for specific charging times recommended by the manufacturer.

3. Q: Can I leave the Portable Power Station E1000 plugged in when not in use?
   A: It is recommended to unplug the power station when not in use to prevent overcharging and to conserve energy. Follow the manufacturer’s guidelines for optimal battery maintenance.

WARNING:
This manual contains important information to ensure the safe operation, handling and storage of this product. To reduce the risk of injury read and understand this manual prior to use. Save the manual for future reference.

IMPORTANT SAFETY RULES

WARNING:
Risk of Electric Shock. If misused, the voltage generated by this power station can be deadly. Always use common sense and adhere to the manufacturer’s instructions when using this product.

• Explosion Hazard. Do not burn or incinerate the power station. Do not expose this unit to temperatures above 140°F (60°C). Exposure to fire and extreme temperatures can cause an explosion resulting in property damage, personal injury, and death.
• Prior to using the DC charging feature, consult the vehicle operator’s manual or the manufacturer’s website to obtain the vehicle fuse ratings. Verify that the vehicle’s electrical system and fuses can safely supply the energy required to charge the power station. If a fuse opens repeatedly during charging, disconnect the power station and determine the cause of the overload. Do not replace the fuse with a fuse rated higher than the vehicle manufacturer’s recommendation or attempt to circumvent the safety features of the fuse. Doing so could create a risk of fire.

SAVE THESE INSTRUCTIONS

• Follow the manufacturer’s instructions when using this product. Misuse can reduce the protection provided by this equipment.
• Do not use this device to power life support devices or other necessary medical equipment.
• Do not overload the power station. Exceeding the unit’s wattage/amperage capacity can damage the unit and/or electrical devices connected to it.
• Risk of electric shock. This tool does not provide an electrical path to earth ground when used with a grounded appliance.
• Do not operate, store or handle the power station in wet conditions. Do not submerge the power station. Water entering the power station will increase the risk of electric shock.
• To reduce the risk of electric shock and property damage, the power station should only be used in dry locations.
• Always use the power station in well-ventilated areas. Do not use it in areas where flammable fumes or gases can accumulate, such as an inadequately vented bilge of a boat or near propane tanks.
• Always closely supervise this product when it is used near children.
• Do not insert fingers, hands, or foreign objects into the product.
• To avoid overheating the power station, do not obstruct the unit’s vents. If the power station becomes too hot, it will automatically shut off.
• Keep power station cool. Do not place the unit near heat sources or expose it to excessive heat.
• Keep the power station away from fire or extreme temperatures. Exposure to fire or temperatures may cause an explosion.
• Do not operate or store the power station in locations colder than 4°F (-15.5°C) or hotter than 113°F (45°C). This product should not be stored outside or in your vehicle.
• Do not use the power station or it’s charger if it has been dropped or received a sharp blow. A damaged power station will increase the risk of fire and electric shock.
• Do not charge the power station with a damaged cord, plug, or adapter.
• The power station should only be charged using the power sources listed in the product specifications.
• To avoid damaging the unit, only use cords that are provided or approved by the manufacturer to charge the power station.
• Do not attempt to modify this product or use it with accessories that are not recommended or sold by the product manufacturer. Using incompatible accessories may result in a risk of fire, electric shock, property damage, or injury to persons.
• Be careful when connecting/disconnecting the power station from an outlet or connecting/disconnecting loads from the power station. Do not force the power station’s plug into an outlet. Do not force plugs into the power station.
• Do not force a polarized plug (one prong larger than the other) into this product. Flip plug over and retry.
• When disconnecting loads, pull the plug instead of the cord. Pulling the cord may damage the cord or the plug.
• Do not power items with damaged or frayed power  cords.
• Do not disassemble the power station. All repairs should be performed by the manufacturer or authorized service person. Using an incorrectly reassembled power station may create a risk of fire or electric shock.
• Do not store the power station near fertilizers, gasoline, or other chemicals.
• Store the product indoors in a dry secure location away from children.
• To avoid damaging the internal battery, the power station should be stored in a partially charged state.

SPECIFICATIONS

GENERAL

• Model E1000
• Capacity 907Wh (21.6V)
• Size  13.4 in. (341 mm) [L] x 8.6 in. (219 mm) [W] x 8.4 in. (213 mm) [H]
• Net Weight 20 lbs. (9.1 kg)

INPUT

• DC Input  12-30V DC, 8.5A Max
• Charge time is approximately 5-6 hours

OUTPUT

• AC (x3)   120V AC, 60Hz, 1000W Max Rated
• USB-A (x2)   5V DC, 2.4A, 12W Max Per Port
• USB-A Fast Charge (x2)  5V DC, 3A/9V DC, 2A/12 V DC, 1.5A 18W Max
• Type-C Fast Charge (x2)  5V DC, 3A/9V DC, 3A/12 V DC, 3A/15V DC, 3A/20V DC, 3.25A 100W  5V DC, 3A/9V DC, 3A/12 V DC, 3A/15V DC, 3A/20V DC, 3.25A 65W
• DC Output  13V DC, 10A
• Wireless  10W

OTHERS

• Cell Type   NCM
• Cycle Life   500 cycles to 80% capacity @25°C charge and discharge environment0.5C charge (1.45A per cell), 1 C discharge (2.9A per cell)
• Protection   Overcharge protection, high temperature protection, low temperature protection, over-discharge protection, overload protection, short circuit protection, over-current protection, battery fault protection
• Charging Temperature  42.8°F to 104°F (6 to 40°C)
• Discharge Temperature 14°F to 104°F (-10 to 40°C)
• Working Humidity 0% to 90% (non-condensate)
• Product Expansion  N/A

PACKING LIST
The following products and accessories are included with your purchase:

PRODUCT FEATURES

• A. Power Button
• B. DC Button
• C. USB Button
• D. AC Button
• E. LCD Screen
• F. DC Output
• G. USB Output
• H. AC Output
• I. Wireless Charging Pad
• J. Carrying Handles
• K. DC Input Port

LCD SCREEN DETAILS

For more fault display and handling information, please refer to the troubleshooting section later in this manual.

CHARGING YOUR POWER STATION

The power station is shipped in a low charge condition. Using the AC adapter, fully charge the power station before first use. The initial charge could take between 5 and 6 hours. Subsequent charge times will vary.
To avoid damaging the unit, only use cords that are provided or approved by the manufacturer to charge the power station. If desired, the power station can be used to power other devices while it is being charged. When the unit is charging and discharging simultaneously, the display will alternate between the discharge and charge time remaining.

AC CHARGING:

• Plug the AC adapter cable into the power station’s DC input port and then connect it to an AC power supply.

NOTE: The input voltage must be between 90 – 260V AC. Voltage over this range will cause charging failure.

• The LCD screen will display the remaining charge time and battery charge level.

DC CHARGING:

• Start the vehicle in a well-ventilated area that is a safe distance away from bystanders.
• Plug the car charger cable into the power station’s DC input port and then connect it to the vehicle’s 12V DC outlet.

NOTE: The provided car charger cable should only be used to charge the power station. Do not attempt to power other devices by using this cable.

• The LCD screen will display the remaining charge time and battery charge level.

SOLAR CHARGING:

• Plug the Mc4 adapter cable into the DC input port and then connect it to a solar panel or series of panels. „ The LCD screen will display the remaining charge time and battery charge level.

USING YOUR POWER STATION

Once your power station is charged or while your power station is charging, it can be used to power other devices. Routinely monitor the power station’s battery charge level, discharge time, and load output during use.

WARNING:

• Do not overload the power station. Check the power requirements for all devices before connecting them to the power station. Power requirements are often listed on a device’s data label or nameplate. Exceeding the unit’s wattage/amperage capacity can damage the unit and/or electrical devices connected to it.

TO TURN THE POWER STATION ON/OFF

• Press and hold the power button for two seconds to turn the unit on. This will activate the LCD screen and allow the DC port, AC receptacles and USB ports to be used.

NOTE: If the unit is inactive for five minutes, it will go into sleep mode and the LCD screen will turn off. Press any button to wake the unit.

• If the unit is inactive for two hours, it will automatically turn off.
• To turn the unit off, press and hold the power button again.

NOTE: The unit can not be turned off while it is being charged.

TO USE THE DC OUTPUT

• Turn the unit on and wait five seconds for the unit to initialize.
• Press and release the DC button to turn on DC power.
• Plug the device you want to power or charge into the power station’s DC output port.
• Press and release the DC button to turn off DC power. DC power will automatically turn off in two hours if no load is detected.

TO USE THE USB PORTS

• Turn the unit on and wait five seconds for the unit to initialize.
• Press and release the USB button to turn on USB power.
• Plug the device or devices you want to power or charge into the power station’s USB ports.

NOTE: The fast charge USB ports can charge and power most compatible electronic devices, including tablets and smartphones.

• Press and release the USB button to turn off USB power. USB power will automatically turn off in two hours if no load is detected.

TO USE THE AC RECEPTACLE

• Turn the unit on and wait five seconds for the unit to initialize.
•  Press and release the AC button to turn on AC power.
• Plug the device or devices you want to power or charge into the power station’s AC receptacles.
• Press and release the AC button to turn off AC power. AC power will automatically turn off in one hour if no load is detected.

TO USE WIRELESS CHARGING

• Turn the unit on and wait five seconds for the unit to initialize.
• Place a compatible device on the wireless charging pad to begin charging. The pad activates automatically when a device is placed on top of the unit and deactivates when it is removed.

OVERLOAD RESET

Do not overload the power station! Monitor the power station’s output. If the unit is nearing overload, turn the power station off. Remove one or more connected devices to decrease the load and resume normal operation.
If the load is not reduced, the unit will reach an overload condition. To extend the life of the power station, avoid running the unit near capacity.
If the unit is overloaded or if there is a short circuit in a connected device, the ERROR and/or OVERLOAD icons will appear in the display and the power station will automatically stop discharging.

To restore electrical output:

• Remove all connected devices and turn the unit off.
• Turn the unit on and wait five seconds for the unit to initialize.
• Check the power requirements for the devices you want to power or charge. Ensure that the power requirements do not exceed the unit’s load capacity.
• Connect and charge devices as previously described.

TROUBLESHOOTING AND ERRORS

loads and only connect devices that are rated below 65% of the power station’s load capacity
If the error remains after trying the solutions listed above and restarting the unit, contact customer service for assistance.

MAINTAINING AND STORING THE UNIT

GENERAL MAINTENANCE

• Routinely clean the unit’s exterior and vents. Turn the unit off. Use a clean cloth or soft bristle brush to remove dirt, oil, grease, etc. Do not use water or solvents and never submerge the unit.
• Inspect the unit for broken parts, damaged ports/receptacles, loose screws, etc. NEVER disassemble or attempt to service the power station. If the unit is damaged, contact customer service for assistance.

STORING THE POWER STATION

• Store the product indoors in a dry secure location away from children.
• Do not store the power station near fertilizers, gasoline, or other chemicals.
• Do not operate or store the power station in locations colder than 4°F (-15.5°C) or hotter than 113°F (45°C). This product should not be stored outside or in your vehicle.
• To avoid damaging the internal battery, the power station should be stored in a partially charged state.
• When storing the unit for less than three months (short-term storage), charge the unit to 50% .
• When storing the unit for more than three months (long-term storage), charge the unit to 60% and add additional charge periodically.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

WARRANTY INFORMATION

LIMITED WARRANTY STATEMENT
Enginuity Power Systems warrants to the original retail purchaser that this product is free from defects in workmanship and materials for two years from the date of purchase. Keep a copy of your purchase receipt as proof of purchase This warranty is non-transferable and does not cover damages from normal wear and tear, modifications, abuse, misuse, accidents, neglect, improper storage and maintenance, non-authorized servicing, or acts of God. The warranty is limited to the power station and the original purchaser. Enginuity Power Systems is not liable for any third party claims, property damage, data loss, financial hardship, etc. arising from the use of this product.
The product, and any defective parts, must be returned to Enginuity Power Systems or an authorized service repairer within the warranty period. At the discretion of Enginuity Power Systems, the owner may be responsible for some or all of the shipping and delivery costs. In respect to claims, Enginuity Power Systems is only responsible for repairing or replacing defective items.
This warranty provides specific legal rights; additional rights may differ by state. For more information, contact customer service at service@eflexps.com.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.”

The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from body to use the device is 20cm.

CUSTOMER SERVICE
SERVICE@EFLEXPS.COM
© 2024 Enginuity Power Systems. All Rights Reserved. 730 S. Washington St., Alexandria, VA 22314

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>