GSMWOND Wireless Strobe Siren User Guide
- June 5, 2024
- GSMWOND
Table of Contents
GSMWOND Wireless Strobe Siren
Welcome
This strobe siren is a wireless siren with the sound volume up to 110dB, and it is furnished bright LEDs. It is connected to the alarm hub via eV1527 protocol, with an effective communication range of up to 100 meters without obstacles. If the electrical power is lost, the backup battery built-in the siren provides power operation up to 3 hours.
In The Box
- Strobe Siren x1
- Power Adapter x1
- Mounting Screws x2
- User Guide x1
Specifications
- Power Supply: +12VDC, 1000mA
- Backup Battery: 3.7V, 500mAh Lithium Battery
- Consumption: <150mA@normal
- Alarm Volume: 110dB@powered by 12VDC
- Radio Frequency: 433Mhz
- Operation Temperature: -10~55℃
At a Glance
Hub
- Strobe (Red)
- Siren
- Power port (+12VDC)
- Tamper switch
- Battery on/off switch
- Configuration button
- Front cover
- Backplate
- Indicator (Blue)
Strobe (Red)
| What you see | What it means |
|---|---|
| Blinking | Alarming ( 150 FPM ) |
| Solid | Pairing/Sniffer mode |
How to connect to alarm hub
- STEP 1. click configuration button three times on your siren, then the siren goes into the pairing/sniffer mode with light on and ready to connect to alarm hub.
- STEP 2. Trigger your alarm hub an alarm to send a transmission signal to the siren, then the siren gives a long beep of successful indication.
How to disconnect with alarm hub
Click configuration buttons more than 10 times until the siren lights on , then the siren restarts. The factory reset is now completed.
Read User Manual Online (PDF format)
Loading......