eufy S330 4G LTE Outdoor Solar 4K Security Camera User Guide
- July 5, 2024
- Eufy
Table of Contents
- What’s in the Box
- At a Glance
- Inserting SIM Card and microSD Card
- Charging the Camera
- Setting up the Camera
- Mounting your Camera
- Select a Location for the Solar Panel
- Mount the Camera
- Bundling the Camera on a Post
- Install the Solar Panel
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
eufy S330 4G LTE Outdoor Solar 4K Security Camera User Guide
What’s in the Box
At a Glance
❶ LED Indicator
❷ Speaker
❸ microSD Card Slot
❹ Light
❺ Lens
❻ Microphone
❼ Light Sensor
❽ SIM Card Slot
❾ SYNC Button
❿ USB-C Charging Port
Inserting SIM Card and microSD Card
-
Open the waterproof cover of the nano SIM slot on the back of the camera, then insert the provided nano SIM card.
● Make sure the gold contacts side of the nano SIM card is facing up. -
Rotate the camera and open the waterproof cover of the SD card slot, then insert a microSD card.
● Make sure the chip side of the microSD card is facing up.
Close tightly the waterproof cover after inserting the card
Charging the Camera
Fully charge the camera prior to its initial use. Charging takes 3 to 5 hours to complete.
Setting up the Camera
-
Download and install the eufy Security app, then sign in or create an account.
-
Follow the in-app instructions to add the camera to the device list.
Mounting your Camera
Select a Location and a Height
Select a location where you can get the desired view. We recommend hanging the
camera 8-10 ft (2.5-3 m) above the ground.
To ensure that no detection is missed, do not install the camera directly facing the monitoring area. Instead, maintain an angle to avoid any potential blind spots.
Select a Location for the Solar Panel
Select an optimal location for the solar panel that receives sufficient sunlight and is within a 10 ft (3 m) radius of the camera. Make sure the location has facilities or structures suitable for mounting the solar panel.
To absorb the most solar energy, choose the highly recommended orientation for installation based on your location.
Mount the Camera
-
Drill holes with a 15/64 inch (5.95 mm) drill bit with the provided positioning card, then insert the anchors into the holes.
-
Firmly secure the camera onto the mounting bracket.
-
Connect the solar panel to the camera using the USB-C cable.
Bundling the Camera on a Post
You can also bundle the camera on a post using the pole mounting strap.
Install the Solar Panel
-
Secure the mounting bracket in the selected optimal location, then install the solar panel onto the mounting bracket by turning it.
-
Remove the film before use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>