Danfoss AK-ST 500 AK Controller with USB-B Instructions
- July 3, 2024
- Danfoss
Table of Contents
Instructions
AK-controller with USB-B
Driver installation
AK-ST 500 AK Controller with USB-B
Windows 7 and 8: See below
Windows 10: Driver is available in Windows 10 and will automatically install.
Windows 7:
- Get the driver: http://food-retail.danfoss.com/support-center/apps-and-software/ak-st-500/
- Un zip
- Place the driver in the folder “lib”
- Power on the AK-controller and wait 10 sec.
- Connect AK-controller to PC
- Open your Device manager
- Select “ADAP-KOOL (R)”
- Press right mouse button
- Press “Update Driver Software”
- Browse for driver software
- Check
- Press “Next”
- Ignore the warning and continue
- Finish
- Read the COM-number
- Continue with Service tool “Configuration”
Controller AK
Instructions RI8RY202
© Danfoss 07/2016
Documents / Resources
|
Danfoss AK-ST 500 AK Controller with
USB-B
[pdf] Instructions
AK-ST 500, AK Controller with USB-B Pack Controller, AK Controller, Controller
with USB-B Pack Controller, AK-ST 500 AK Controller with USB-B, AK-ST 500 AK
Controller, Controller with USB-B
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>