YYGIFT FBORNSPK Wireless Ornament Speaker User Manual
- July 2, 2024
- YYGIFT
Table of Contents
YYGIFT FBORNSPK Wireless Ornament Speaker
WHAT’S INCLUDED
- FBORNSPK Wireless Speaker
- USB Charging Cable
- User’s Manual with Warranty Information
Charging
Insert one end of the included Micro USB charging cable (included) into the
DC5V charging port on your speaker. Insert the other end into the USB port of
a computer or suitable USB charging adapter. When in Charging (Indicator is in
Red ) When Charging Complete (Indicator is Off)
- Power on/Power off Button Press and hold for 2-3 seconds to turn on/off the speaker. Quick press to play/pause the music playing.
- LED Indicator When in charging, the LED light in red, when fully charged the LED light turns off.
- DC5V Charging port
Power On
Press and hold the Power button 2-3 seconds to power ON the speaker. After
powering ON, the speaker will automatically go to Bluetooth pairing mode.
Press and hold the power button 2-3 seconds to power the speaker OFF.
Bluetooth Pairing:
Power on your speaker. The speaker will automatically in Bluetooth mode. Then
go to the Bluetooth settings menu on your phone. Make sure that Bluetooth is
turned on. Connect to the device listed as“Ornament Speaker ”
Multi Pairing Function
If you have Multiple FBORNSPK speakers, enjoy high-quality sound using the multi-pairing function. Turn on one speaker first, and then use your Bluetooth device to pair with this speaker. After being paired, this speaker will be the main speaker . Then please turn on the rest speakers one by one, once the speaker is turned on, it will pair with the main speaker automatically . For multi-paired speakers, you can turn off the main speaker, then the rest speakers will be turned off at the same time.
FCC STATEMENT
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Specifications
- Bluetooth Version: V3.0
- Bluetooth Range: Upto 33 feet (10 meters)
- Power Supply: DC5V,1A(USB)
- Battery Type: 3.7V 300mah polymer Battery
- Play Time (Only Music): 2 hours
- Applicable at 50% of maximum volume . Results will be lower when volume is higher.
FAQ
Q: How long does the battery last?
A: The playtime for music is approximately 2 hours at 50% of maximum
volume. Lower volumes may extend playtime.
Q: How do I know when the speaker is fully charged?
A: The LED indicator will turn off when charging is complete.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>