DERUCCI H158 Remote Control Instructions
- July 2, 2024
- DERUCCI
Table of Contents
DERUCCI H158 Remote Control
Product Specifications
- Model: H158
- Power: 3V DC
Product Usage Instructions
Remote Control Functions
The remote control key functions are as follows:
| Key | Description |
|---|---|
| 1 | Back motor extended, release to stop |
| 2 | Foot motor is extended, released to stop |
| 3 | The back motor retracts, release to stop |
-
One-Button Reset
To perform a one-button reset, press key label 4. This action will retract all motors to the minimum stroke position, effectively performing a power-on reset. -
Motor Position Recording
To record the current motor position to a specific setting (e.g., SNORE, ZG, Lounge), follow the reuse function steps provided for each setting. For example, to record the current position to SNORE, press FLAT + SNORE for about 3 seconds until the backlight flashes and the buzzer sounds. -
Flashlight Operation
To operate the flashlight feature, simply press the flashlight key to turn it on and release it to turn it off. -
Coding Method
The coding method involves a specific sequence of actions using the remote control head, foot rise, and control box code key. A successful code entry is indicated by a buzzer sound. The control box has a reset function for the code key.
Caution
Ensure compliance with FCC Rules outlined in the manual. Any changes or
modifications not approved may void the user’s authority to operate the
equipment.
Frequently Asked Questions (FAQ)
Q: How do I reset all motors to their initial positions?
A: Press key label 4 for a one-button reset to retract all motors to the
minimum stroke position.
Remote control key diagram
- Model: H158
- Power: 3V DC
Description of remote control function
Key label
|
Feature
---|---
1| Back motor extended, release to stop
2| The foot motor is extended, and released to stop
3| The back motor retracts, release to stop
4| One-button reset, all motors retracted to the minimum stroke position,
power-on reset
---|---
5| The foot motor retracts, release to stop
6| The motor runs to the SNORE position with one click.
Reuse function: Press FLAT+ SNORE for about 3 seconds, the backlight will
flash and the buzzer will sound, and the current motor position will be
recorded to SNORE
7| The motor runs to the ZG position with one click.
Reuse function: Press FLAT+ ZG for about 3 seconds, the backlight will flash
the buzzer will sound, and the current motor position will be recorded to ZG
8| Press the flashlight to turn on, release the flashlight to turn off
9| The motor runs to the Lounge position with one click.
Reuse function: Press FLAT+ Lounge for about 3 seconds, the backlight will
flash the buzzer will sound, and the current motor position will be recorded
to Lounge
Coding method:
[Remote control head down + foot rise + control box code key] Buzzer sounds,
indicating successful code
- The control box has a reset function for the code key
- The control box is powered on and reset, all motors are reset at the same time, and the reset process cannot be interrupted by any key
FCC STATEMENT
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IC statement:
This device complies with Industry Canada Licence-exempt RSSs. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
RF Exposure statement:
the device has been evaluated to meet general RF exposure requirements.