E-RAN BS07A Bluetooth Speakers User Manual

E-RAN BS07A Bluetooth Speakers

Dear Customers

Thank you very much for choosing the BS07A Bluetooth speaker. Please read this manual carefully before using it, operate it correctly, and give full playing of the superior performance of the product. This product has a stylish design, lightweight and portable, and has pure sound quality. The entire series has appearance patents. The system adopts industry-leading electro-acoustic technology, allowing you to enjoy excellent 3D live sound effects anytime, anywhere in-home use and business work.

Safety Precautions

1. Please store and use this product in a normal temperature environment, do not expose this product to rain or humid environment;
2. Do not throw or disassemble. Repair and modify this product to avoid unnecessary damage to the product;
3. The product has built-in lithium battery, please don’t throw it away or put it in the fire to avoid danger;
4. In order to help prolong the service life of the speakers and your physical and mental health, please do not listen to the sound in a long-term high volume environment, so as not to damage your hearing;
5. In the event of a failure, please disconnect the power immediately to prevent damage to the speaker and other components;
6. An insufficient battery will affect the Bluetooth sound effect or Bluetooth is easy to disconnect, please charge in time.

The key distribution

• This interface key diagram similar to BS07 needs to be attached.

Button definition

This product supports the use of a physical button structure design, the button operation instructions are as follows.

• Switch on/off: Switch on/off the RGB atmosphere lamp
• Previous key: Previous/Volume Plus
• Next button: Next button/Volume down
• Multi-function button: Pause play/cancel Bluetooth pairing/receive and call

The position of charging indicator +MIC hole should be marked on the wireframe diagram for layout.

Instructions

Long press the power button for 4S, the device is turned on and enters the Bluetooth pairing mode, the mobile phone searches for the Bluetoo th pairing name “BS07A” and then connects.

1. The device will automatically power off after 5 minutes without operation.
2. Plug in the factory-equipped Type C cable, the device starts to charge and the write light is on, and the write light is off when the device is fully charged.
3. After the AUX cable is inserted, the device automatically enters AUX mode and plays the device audio source at the other end of the AUX cable.
4. After Bluetooth connection, press the multi-function button continuously for 5 seconds to cancel the current Bluetooth pairing.
5. After the device is turned on, press the switch button twice continuously to turn on the RGB light effect, and then press it twice continuously to turn off the light effect.

Technical Parameters

1. 5V/1000MA Input charging voltage and current: 5V/1000MA
2. 850mAh Battery capacity: 850mAh
3. V5.3 Bluetooth version: V5.3
4. 15M Working range: 15M
5. 6H Working hours: 6H

Remarks: All parameters and operation methods of this manual may be updated with the iteration of the software and hardware solutions, subject to change without notice.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference t o radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>