CCRANE CCRadio3 2 Meter Ham Band Portable Radio Instruction Manual
- July 2, 2024
- ccrane
Table of Contents
- CCRadio3 2 Meter Ham Band Portable Radio
- Product Information
- Specifications:
- Product Usage Instructions:
- 1. Before Use:
- 2. Safety Instructions:
- 3. Product Functionality:
- 4. Customer Support:
- Q: What should I do if my radio is missing components?
- Q: How can I reach customer support?
- Q: How do I ensure the longevity of my CCRadio 3?
CCRadio3 2 Meter Ham Band Portable Radio
“`html
Product Information
Specifications:
-
Product Name: CCRadio 3
-
Enhanced audio for realistic human voices and good musical
performance -
Five memory buttons for easy station changing
-
Long-lasting design
Product Usage Instructions:
1. Before Use:
Ensure you have unpacked all contents including the CCRadio 3,
AC power cord, manual, and warranty card. Contact C. Crane if
anything is missing or damaged. Retain the box for potential
servicing needs.
Owners Record:
Record the serial number located inside the battery compartment
and details of purchase/dealer for future reference.
2. Safety Instructions:
Read and understand all safety instructions provided on pages 5
and 6 of the manual. Avoid exposing the product to rain or moisture
to prevent fire or electric shock hazards.
3. Product Functionality:
The CCRadio 3 can be tuned for realistic human voices and
musical performance. The five memory buttons on top facilitate easy
station changes. Enjoy years of learning, news, and entertainment
with this durable radio.
4. Customer Support:
If you have any queries or issues with your CCRadio 3, contact
C. Crane directly or visit ccrane.com for assistance. If purchased
elsewhere, C. Crane may still provide support.
FAQ:
Q: What should I do if my radio is missing components?
A: Contact C. Crane immediately if any items are missing or
damaged.
Q: How can I reach customer support?
A: You can call C. Crane or visit their website at ccrane.com
for assistance.
Q: How do I ensure the longevity of my CCRadio 3?
A: Follow the safety instructions provided in the manual, avoid
exposure to rain or moisture, and handle the product with care.
“`
INSTRUCTION
MANUAL
Please read all the instructions completely before use and save this manual
for future reference.
About C. Crane
C. Crane’s radio division began soon after Bob and Sue Crane moved from the
San Francisco Bay Area to the beautiful and remote Redwood Country of far
Northern California. As they settled into Fortuna, nestled in the heart of the
Redwoods, Bob tried to tune in his favorite Bay-Area radio stations, and was
shocked. There were only a few radio stations available until nighttime
arrived and thats when the AM dial came alive. Around that time, Bob spent
many hours during the day at a drafting table and found that he missed
listening to KGO, San Francisco so much while he was working that his drafting
and designs were slowing down.
After about a year of searching, the Cranes found a simple antenna for AM that
gave them fantastic AM reception – even through the trees – and they knew they
had to get the word out. So, they decided to expand their company to market
this wonderful antenna. They advertised the antenna on the radio, and after a
few learning experiences, the C. Crane radio division was up and running.
That was over 30 years ago. Bob, Sue and Grandma Faye were the first phone
operators. Their customers quickly taught them what they wanted in the way of
products and services, and with their input, Bob and Sue grew C. Crane into a
family-based business guided by strong ethics.
Since selling their first AM antenna, C. Crane has become a premier
electronics company. We have developed several radios to serve radio listeners
that prefer information, talk radio and audio tuned for voice clarity. After
several near 7.0 earthquakes, in 1992 we added radio and light products that
would become essentials during an emergency event anywhere in the country.
Thanks for choosing C. Crane. The items included in the C. Crane Catalog are
always either the best of their class or the best for the money. All of C.
Crane’s products must pass extensive testing to maintain high quality
standards.
And as for the mysterious letter “C” in C. Crane, well, Bob and Sue’s middle
names both begin with the letter “C”, thus the name C. Crane.
2
CCRadio 3
Introduction
Thank you for purchasing the CCRadio 3. Please read through these instructions
thoroughly before using the product.
The CC Radio 3 has many of the refinements and improvements requested by
customers who have used previous versions of our CCRadios. This radio is built
for the highest performance ever on AM. Traditional FM reception is amazing in
its ability to bring in a weak station clearly. The CCRadio 3 also has
Bluetooth©, the NOAA Weather band and alert along with the 2-Meter Ham band.
The CCRadio 3 has enhanced audio that can be accurately tuned for realistic
human voices. It can also be adjusted for good musical performance. Five
memory buttons on top of the radio make it easier to change stations than
front mounted buttons.
For many radio listeners, the addition of the 2-Meter VHF Ham band will be
their first experience with amateur (ham) radio. I hope you have the time to
explore this band. What you’ll hear is a lot of dedicated radio people using a
communication device with pride. You will especially want to tune in to
2-Meter VHF during a local, areawide emergency when communications will be
very different. When the power in an area is down and cell phones and other
modes of communication are unavailable, many hams use portable equipment that
lets them work as beacons of information. They have direct communication with
federal agencies and the Red Cross. We recommend that you find out which local
2-Meter frequencies are used during an emergency in your area and have them
installed into the five memory locations.
The CCRadio 3 has been designed to be long lasting. We hope it will give you
many years of learning, news, and entertainment. If you have any questions
about your radio, please give us a call or check out ccrane.com.
Also, if you have a problem and you purchased the CCRadio 3 from another
company, call us and C. Crane may be able to help you faster.
Thanks! From all of us at C. Crane.
CCRadio 3
3
Owners Record / Before Use
FOR YOUR FUTURE REFERENCE:
Serial No. (Found inside battery compartment): ____ Date of
purchase / Name & address of dealer: _____
UNPACKING The box should contain the CCRadio 3, AC power cord, this manual and
a warranty card. If anything is missing or damaged, please contact C. Crane
immediately. We recommend that you keep the box in the unlikely event that
your radio needs servicing.
BEFORE USE Please read IMPORTANT SAFETY INSTRUCTIONS on pages 5 and 6 before
use. It is important to read and understand all instructions.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
The lightning flash and arrowhead within the triangle is a warning sign
alerting you of “DANGEROUS VOLTAGE” inside the radio.
CAUTION: To reduce the risk of electric shock, do not remove the radio back.
No user serviceable parts inside. Refer servicing to qualified service
personnel.
The exclamation point within the triangle is a WARNING SIGN ALERTING you of
important instructions accompanying this radio.
CAUTION · Before turning the unit on, set your volume control to a low
setting. · Slowly increase the sound until you can hear it comfortably and
clearly
without distortion. · Long-term exposure to loud sounds may cause hearing
damage. It is
best to avoid high volume levels when using headphones/earbuds, especially for
extended periods.
4
CCRadio 3
Safety Instructions
1. Read and understand all safety and operating instructions before the radio
is operated.
2. Retain Instructions: The safety and operating instructions should be
retained for future reference.
3. Heed Warnings: All warnings on the appliance and in the operating
instructions should be followed.
4. Water and Moisture: The appliance should not be used near water. Do not
use near a bathtub, washbowl, laundry tub, kitchen sink, wet basement,
swimming pool, etc.
5. Cleaning: Unplug the receiver from the AC power outlet before cleaning.
Use only a dry cloth for cleaning the exterior of the receiver.
6. Placement: Do not place the radio on an unstable cart, stand, bracket or
table. The radio may fall, causing serious personal injury and damage to the
receiver.
7. Ventilation: This radio should be situated so that its location or
position do not interfere with its proper ventilation. For example, the radio
should not be used on a bed, sofa, rug or other soft surfaces that may block
the ventilation openings. It should not be placed in a built-in situation like
a cabinet that may reduce air flow through the ventilation openings.
8. Heat: Never put the radio in direct sunlight in an unventilated area or
behind glass like a car’s interior. The appliance should be away from heat
sources such as radiators, heat registers, stoves, or other appliances that
produce heat.
9. Power Cords: The power cord should be positioned so it is not walked on,
pinched, or have items placed on top of it. Pay particular attention to cords
at plugs, convenience receptacles, and the point where they exit from the
unit. Unplug the power cord by gripping the power plug, not the cord. Operate
the radio using only the correct type of power source indicated. If you are
not sure of the type of power supply to your home, consult your dealer or
local power company.
10. Do not overload wall outlets or extension cords. This can result in a
risk of fire or electrical shock. Never insert objects of any kind into the
receiver through openings. The objects may touch dangerous voltage points or
short out parts. This could cause a fire or electrical shock.
CCRadio 3
5
Safety Instructions
11. If the radio is left unattended and unused for long periods of time,
unplug it from the wall outlet. This will prevent damage caused by lightning
or power line surges.
12. If the radio is left unattended and unused for long periods of time,
remove the batteries. The batteries may leak and damage furniture or your
radio.
13. Do not attempt to service the receiver yourself. Removing the cover may
expose you to dangerous voltage, and will void the warranty. Refer all
servicing to authorized service personnel.
14. The receiver is equipped with a polarized type plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug still fails to fit, contact an
electrician to replace the obsolete outlet. Do not defeat the safety purpose
of this plug.
15. The appliance should be serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged, or
B. Objects have fallen or liquid has been spilled into the radio, or
C. The radio has been exposed to rain, or
D. The radio does not appear to operate normally or exhibits a marked change
in performance, or
E. The radio has been dropped or the enclosure damaged.
16. The user should not attempt to service the appliance beyond that
described in the operating instructions. All other servicing should be
referred to qualified service personnel. This symbol is to alert you to
important operation or servicing instructions that may appear in the owner’s
manual.
17. Antenna installations can be dangerous because many times it involves the
use of a ladder and a possible fall. The antenna can be struck by lightning,
which can be fatal. We recommend a licensed and insured installation by a
qualified person.
18. Long-term exposure to loud sounds may cause hearing damage. It is best to
avoid high volume levels when using headphones or earbuds, especially for
extended periods.
6
CCRadio 3
Table of Contents
About C. Crane Introduction Owners Record / Before Use Safety Instructions
Display Panel Button Identification Getting Started
Powering Your Radio Installing The Batteries Setting The Clock Setting The
Alarm Snooze Feature Sleep Timer Radio Operation Tuning Weather Alert System
2-Meter Ham (VHF) Default Clock / Frequency Setting Bluetooth Display Light
Lock Switch Headphone Jack Reset Hole Audio & Recording Jacks Setting The
Timer Specifications Troubleshooting Guide Troubleshooting AM Alignment
Procedure Radio Noise Troubleshooting AM Listening Tips Accessories Personal
Station Log
CCRadio 3
2 3 4 5 8 9
10 11 12 12 13 13
14 15 17 18 19 20 20 20 20 21 22 24
26 27 28 29 30 31
7
Display Panel
1
2 15
34 5
16
14
6
13
7 12
8
11
10
17
9
1. WEATHER ALERT MODES 2. MEMORY LOCATION (1 – 5) 3. KEY LOCK ON/OFF 4. SLEEP
TIMER/SNOZEE STATUS 5. BATTERY SYMBOL 6. BATTERY POWER LEVEL
INDICATOR AND SIGNAL STRENGTH METER 7. SQUELCH INDICATOR 8. TIMER ACTIVE
INDICATOR
9. CLOCK SECONDS 10. FREQUENCY/CLOCK DISPLAY 11. ALARM STATUS AND TYPE 12. AM/PM INDICATOR 13. INDICATES BAND IN USE 14. AUX IN INDICATOR 15. STEREO RECEPTION 16. BLUETOOTH 17. TIMER ON/OFF
8
CCRadio 3
Button Identification
17 16
18
15
13
4
12
14
11
10 9 8
1 235 6
7
1. ·CLOCK SET 2. ·ALARM SET 3. ·TIMER SET 4. DISPLAY CLOCK OR FREQUENCY 5. BASS CONTROL 6. TREBLE CONTROL 7. TUNING /TIME SET (UP/DOWN) 8. HEADPHONE JACK 9. VOLUME CONTROL 10. LOCK SWITCH
11. TUNING KNOB /· SQUELCH SET 12. POWER /· SLEEP TIMER 13. DISPLAY LIGHT 14.
TELESCOPIC ANTENNA 15. MEMORY (1-5) / BLUETOOTH
CONTROLS 16. BLUETOOTH / 2-METER /
WEATHER ALERT (3 MODES) 17. AM / FM /·AUXILIARY 18. WEATHER ALERT LIGHT
NOTE: When you see a “·” next to a button on the radio, it means you must press and hold the button down for two seconds to activate the function. The appropriate symbol will then appear on the display along with sounding a “beep”. If the radio is turned off, the beep volume is significantly reduced. To deactivate the Alarm and Timer functions, press and hold the button until it beeps again and the symbol disappears from the display. (Please see Display Panel symbols on page 8.)
CCRadio 3
9
Getting Started
POWERING YOUR RADIO The CCRadio 3 will run on (4) “D” size NiMH or alkaline
batteries or on 120V AC house current using the included power cord. Batteries
are optional. The batteries are necessary to retain the timer, clock, and
memory settings if the power cord is removed from the radio for more than
three minutes. Lithium batteries are not recommended.
Rechargeable batteries that are charged in a separate charger can be used in
this radio. The Battery Power Level Indicator will be lower because the total
voltage is lower for rechargeable batteries.
AC OPERATION Before you plug the AC cord into the radio be sure the AC voltage
is 120Volts/60Hz. If you have batteries in the radio and you use the AC power
cord, the batteries will automatically be disconnected.
NOTE: If you remove the power cord without turning the radio OFF, the radio
will automatically revert to the batteries.
Back of Radio
Insert the plug on the end of the supplied power cord securely into the AC power jack on the back of the radio as shown.
10
CCRadio 3
Getting Started
INSTALLING THE BATTERIES 1. Position the radio face down on a soft surface to
protect it.
2. Remove the battery compartment cover.
3. Insert the (4) “D” cell batteries into the compartment as indicated in the
drawing below. Be sure the negative (-) end is against the spring. Refer to
the drawing below to insure correct installation of your batteries.
4. Replace the battery cover. You are now ready to operate your radio.
1
2
3
4
AC Power Cord plugs in here.
Remove Battery Cover by pressing both clips at the same time towards the
bottom of the radio.
BATTERY REPLACEMENT The battery indicator will display the battery level for
approximately one second when the radio is switched off. After removing dead
batteries for replacement, you have approximately three minutes to replace the
batteries before your clock and memory information will be lost (if the radio
is not plugged in).
DISPLAY SYMBOLS
This symbol means This symbol means the batteries are full. the batteries are low.
This symbol flashing means the batteries
need replacing.
CCRadio 3
11
Getting Started
SETTING THE CLOCK Please read this entire section carefully before you start.
Set the time with the radio off. You must go through the steps listed below
without stopping for more than 15 seconds at any given time or you will have
to start over. (Refer to page 9 for Button Identification.)
1. Press the Clock Set Button and hold for two seconds then release. The hour
digit will flash.
2. Using the Up/Down Tuning Button, digit and AM or PM.
select the appropriate hour
3. Press the Clock Set Button again, then release. The minutes digits will flash. Use the Up/Down buttons to adjust the minutes to the appropriate time.
4. You must press the Clock Set Button again then release to complete the time setting. This also sets the seconds to “00”.
SETTING THE ALARM
There are two different alarm modes on the CCRadio 3. You can choose to wake
up to the radio or to a tone. You can set the alarm with the radio on or off.
If the radio is off, the beep volume is significantly reduced. You can also
set the alarm time immediately after selecting the radio or buzzer alarm as
described below.
TO SET THE TYPE OF ALARM
Press and hold the Alarm Button until you hear a beep and see one of
these symbols flashing on the display
then release.
TO WAKE WITH THE RADIO
While Alarm is flashing on the display, press and release the Clock Set Button
until you see the symbol. When the alarm goes off the radio will play the last
station selected at the same volume level last set.
TO WAKE WITH A MULTI LEVEL TONE
While Alarm is flashing, press and release the Clock Set Button until you
see the
symbol.
TO SHUT OFF THE ALARM FUNCTION Press and hold the Alarm Button until you hear a short beep and the alarm symbol disappears then release.
TO SET THE ALARM TIME
1. Press and hold the Alarm Button for two seconds then release. The hour
digit and Alarm symbol will flash.
2. Using the Up/Down Tuning Button, digit and AM or PM.
select the appropriate hour
12
CCRadio 3
Getting Started
3. Press the Alarm Button again then release. Use the Up/Down Tuning Buttons
to adjust the minute to the appropriate time.
4. Press the Alarm Button again then release to complete the alarm setting.
Although very high quality parts were used in the manufacturing of your radio,
buttons, knobs, and dials should be operated with a light touch for best
longevity.
To stop the alarm from going off every day, press and hold the Alarm Button
until ALARM disappears from the display.
Once the alarm is set, it will automatically go off the next day at the same
time. Use the Power Button to shut off the alarm until the next day.
If the radio alarm is selected, tune the radio to your favorite station and
set the volume before turning your radio off for the day. When the alarm
activates, the radio will play the last station listened to. NOTE: There will
be no audio if the AUX IN is set.
The tone alarm is called HWS or Humane Wake (if that is possible) System. The
alarm tone beep will increase in volume every 15 seconds for one minute
followed by one minute of silence before repeating the cycle.
The alarm system will sound for one hour unless turned off by pressing the
Power Button.
SNOOZE FEATURE When the buzzer alarm is sounding, if you press any button
except the Power Button, the alarm will temporarily stop for five minutes. The
little Zs and Alarm symbol will flash on the display (above the little bed)
while the radio is in snooze mode. To shut off the alarm and snooze feature
press the Power Button.
SLEEP TIMER FEATURE Your CCRadio 3 is equipped with a Sleep Timer that enables
the radio to continue playing for up to 120 minutes after activation, then
shuts the radio off. Selectable times are 120, 90, 60, 45, 30 and 15 minutes.
Press and hold the Power/ Sleep Button until the pictograph of a person in bed
and the numbers 120 are displayed.
Holding the Power/ Sleep Button down will reduce the time in steps, showing
times of 120, 90, 60, 45, 30 and 15 minutes. If you miss the time you want,
simply continue holding the button until the desired time shows on the
display. Release the button. Now the pictograph of the person in bed will
appear on the display. The radio will then shut off after the set amount of
time. To deactivate the Sleep Timer, simply shut the radio off using the Power
Button.
CCRadio 3
13
Radio Operation
TUNING
The CCRadio 3 features four bands: AM / FM / 2-Meter Ham (VHF) and Weather
(WX).
MANUAL TUNING 1. Press the Power Button to turn on the radio.
2. Select the band by pressing the AM/FM button or the Bluetooth/2Meter/Weather Button on the top panel.
3. A single press of the Up or Down Tuning Buttons
will change the
frequency up or down for AM, FM and Ham (VHF) bands, and channel
up or down for Weather.
Each press of Up and Down Tuning Buttons will change the frequency by 10 kHz in AM mode, 100 kHz in FM mode, and 5 kHz in Ham (VHF).
SCAN TUNING
Same as above except press and hold the Tuning Up or Down
Button
for more than 0.5 second. The radio will scan and stop automatically when it
finds an active station. The Scan Tuning will not work on the weather band.
It may also stop scanning on strong interference or noise. Press and hold
again to resume. For 2-Meter Ham scanning, please see page 17 for more
advanced information.
ROTARY TUNING
Rotating the tuning knob will change AM/FM/Ham (VHF) by frequency and the
weather band by channel.
MEMORY TUNING
Five stations may be stored into memory in each of the four bands.
1. Tune to the station or channel you want to memorize. Wait 5 seconds
for best tuning.
Memory buttons
on Top of Radio
2. Press and Hold the desired Memory Button for two seconds or until you hear a beep. The station or channel is then memorized.
The display will show the memory number.
To recall the memorized station, select the correct band and briefly press and
release the Memory Button. The radio will instantly tune to the station stored
in memory.
NOTE: The large buttons on top of the radio make it easy to locate your
favorite station. Very high quality switches are used in manufacturing, so a
light touch is all you need to save and restore your favorite stations. The
control symbols above the buttons are only used while in Bluetooth mode.
14
CCRadio 3
Radio Operation
WEATHER ALERT SYSTEM The WEATHER ALERT modes on the CCRadio 3 can alert you to
special weather related emergencies. During an emergency or weather related
hazard, NOAA issues an emergency tone that will set off an audible and/or
visual alarm on the radio.
NOTE: Hazard warnings are not available in all areas.
There are seven standard NOAA weather channels used in the US and Canada. This
radio receives broadcasts up to 40 miles from transmitting stations.
1. To listen to the standard NOAA weather channels, turn the radio on, press
the Bluetooth/2-Meter/Weather button until WX shows on the display. The
telescopic whip antenna may need to be fully extended and in a vertical
position to receive a station clearly.
2. The channel number of the weather station is shown on the display.
Pressing the Tuning Up or Down Buttons will toggle you through the seven
programmed channels. There should be one or more weather service stations
broadcasting in your local area. You will hear a report that is updated
usually once or more per day for your area. If there is a severe weather or
weather-related emergency, NOAA will update the weather broadcast more
frequently. If there is a weather emergency, the NOAA will issue an alert
tone.
The WEATHER ALERT mode enables you to listen to your favorite AM or FM
station, Auxiliary or Bluetooth device, 2-Meter Ham frequencies or turn the
radio off, and still receive an alert signal warning you of a special
emergency. There are three active WEATHER ALERT modes on the CCRadio 3.
NOTE: 1. When activated, the WEATHER ALERT consumes power even when
the radio is turned off.
2. Be aware that if you are not using AC power the WEATHER ALERT will
completely drain your batteries. If your batteries are dead and AC power is
off, the WX Alert Alarm will not work.
SETTING THE WEATHER ALERT To place the radio in WEATHER ALERT mode, press and
hold the Bluetooth/2-Meter/Weather button for two seconds: You will hear a
short beep and see the alert symbol, shown on page 16, on the display. When
the radio is off, the beep volume is significantly reduced.
CCRadio 3
15
Radio Operation
This symbol is the WEATHER ALERT mode with flashing light only (no Alarm). If NOAA issues a weather related emergency, the radio will automatically alert you with a small flashing light near the top of the radio. The Alert light will continue to flash until any button is pushed.
1. To access the second mode, (WEATHER ALERT with NOAA Audio).
Press and hold the Bluetooth/2-Meter/Weather button again for two
seconds until you hear a long beep. This symbol
will
be displayed in this mode. In this mode, if the NOAA alert tone is
issued, the red light flashes and the radio switches to Weather
Audio automatically.
2. To access the third mode, (WEATHER ALERT with flashing light and siren).
Press and hold the Bluetooth/2-Meter/Weather button again for two seconds
until you hear a double beep. This symbol
will appear and the red light near the top radio comes on continuously.
In this mode, if the NOAA alert tone is issued, the red light on the top of
the radio flashes and a siren turns on for up to 1 minute. In this mode, when
the siren is active, pressing any button on the radio
instantly turns the radio to the Weather Audio and cancels the siren.
SPECIAL NOTE: If you have the headphones plugged in and a weather alert is issued, the audio to the headphones will be cut-off and the siren will sound through the radio’s speaker.
TURNING OFF THE WEATHER ALERT
Press the Bluetooth/2-Meter/Weather button again for two seconds. The alarm
will go off and become inactive. The ALERT symbol will disappear from the
display.
Left Side Top of Radio
In any of the active WEATHER ALERT modes, the weather receiver stays on and listens for an emergency tone issued from NOAA in case of emergency.
Weather Alert Button
You may get a periodic test tone from the NOAA that will cause an unexpected alarm on your CCRadio 3. This tone is only a test and will happen periodically, usually every Wednesday at noon, or whenever the agency decides to test their emergency alert system. Simply pressing any button on the receiver will shut the alert tone off. After an alert has been issued, the WEATHER ALERT light and/or siren will stay on for one minute or until you turn it off by pressing any button.
16
CCRadio 3
Radio Operation
2-METER HAM (VHF) BAND (144 TO 148 MHZ)
The 2-Meter Ham Band is a popular radio band used by amateur radio operators
for civil defense. After a hurricane, earthquake or other calamity, 90% of
emergency coordination at the local level takes place on this band. Listening
to this band during an emergency can be extremely valuable and even life
saving. For most people, the CCRadio 3 will probably be their first experience
with Ham radio.
We have preprogrammed some of the most popular frequencies into the five
memories of the CCRadio 3. Different frequencies may be active at your
location, other than those preprogrammed into the memories. The following are
the frequencies and memory locations as they were originally preprogrammed:
1. 146.520
2. 146.760
3. 146.880
4. 146.940
5. 147.000
You can program your frequencies of interest into a memory location at any time.
To scan the five memory channels when in 2-Meter Ham, momentarily
press both of the Up and Down Tuning Buttons
at once, the radio
will scan the memories and automatically stop when it detects a voice
transmission. Raise the telescopic antenna up fully in a vertical position. It
is best to set the squelch level prior to scanning the memory stations. See
“Setting the Squelch” below.
SETTING THE SQUELCH
Background noise or static is present to some degree at every location and on
every frequency of the 2-Meter Ham Band. This is a normal condition. If you
set the squelch above the background noise level, the radio will remain silent
until a voice transmission is detected. It is best to set the squelch as low
as possible (to just before static is constant). This way you can hear signals
that may be weak. If you set the squelch too high, you may miss some weak
voice transmissions.
To adjust the squelch level, press and hold the main Tuning Knob in for three
seconds until the display changes. Turn the Tuning Knob slowly clockwise from
OFF through 12 (increasing squelch) until the radio just becomes silent. NOTE:
Squelch operates on the 2-Meter Ham Band only.
CCRadio 3
17
Radio Operation
SEARCHING FOR A NEW ACTIVE FREQUENCY
At times, more frequencies will become active than have been
preprogrammed into the radio. You can search the 2-Meter Ham band by
pressing the Up or Down Tuning Button
and holding it momentarily.
You can also start scanning by pressing and releasing the main Tuning
Knob. The radio will begin searching the entire 2-Meter Ham band until it
finds an active frequency and then it will stop. You may want to write down
this frequency to keep track of which frequencies are active. With time you
may find a frequency of interest.
During non-emergency times, you can listen and learn more about the
Ham radio operators that live around you. After listening to them for a time,
you may find you would like to be a Ham, too. Joining requires passing an
entry level multiple choice test and purchasing reasonably priced Ham
radio equipment. The 2-Meter band is the most popular place to start for a
Ham. You can contact the American Radio Relay League (ARRL) toll free at
888-277-5289 or at arrl.org to find out
what you need to learn and the nearest testing location.
C. Crane salutes every Ham who has volunteered to be a part of emergency radio operations.
DEFAULT CLOCK/FREQUENCY SETTING
When listening to AM and FM bands the default setting is for the Frequency to
be displayed for approximately 5 seconds and then return to the Clock Display.
This can be changed to show just the Frequency unless the Clock/Freq button is
pushed and then the clock will display for approximately 5 seconds and then
show the Frequency.
To change the display to show Frequency – turn on the power, and press and
hold the Clock/Freq button. Then quickly press the Memory 1 button until you
hear a beep. Release. You should now see the frequency displayed unless you
push the Clock/Freq button, in which case you will see the clock for
approximately 5 seconds.
Reverse the process to return to the default of showing the clock.
18
CCRadio 3
Bluetooth Operation
Bluetooth is a convenient way to play audio from your phone, tablet, computer,
or voice controlled device using the speaker from the CCRadio 3. Bluetooth
will work wirelessly up to about 50 feet (depending on obstructions) between
your device and the CCRadio 3.
SETUP You will only need to do the following setup once per Bluetooth device.
Settings are remembered thereafter.
1. On the radio, go to Bluetooth mode by pressing the
Bluetooth/2Meter/Weather Button several times until “BT” is displayed on the
LCD screen.
2. Hold the #1 memory button with “PAIR” written above it for about 4 seconds
until the BT icon .flashes on the LCD screen.
3. On your Cell Phone,Tablet, or Computer go to the Bluetooth settings and
enable it if it is not already.
4. Open the list of Bluetooth devices and look for “CCRadio-3”. If you do not
see “CCRadio-3” listed then scan again.
5. Select “CCRadio-3” from the list. Your device should say “Connected… ”
OPERATION While your device is connected with Bluetooth to the CCRadio 3, any
audio that should normally be playing on your device will instead come out of
the CCRadio 3’s speaker. Adjust the volume on the radio and your device for
best sound.
From the CCRadio 3, you can pause, play, or skip backwards or forwards using
the memory preset buttons on top of the radio;
3 button = Skip to Previous. #4 button = Play/Pause. #5 button = Skip to Next
NOTE: Button functionality will vary depending on the app or device linked to.
DISCONNECT To disconnect Bluetooth or allow a different device to connect to
the CCRadio 3, press and hold the #1 memory button for about 3-4 seconds or
until the BT icon .flashes on the LCD screen.
CCRadio 3
19
Radio Operation
DISPLAY LIGHT ON AC POWER
When the radio is plugged into AC power, the display light will always be on
unless you turn it off. The special green LED bulbs last about 100,000 hours
and use very little electrical energy. The display light has three light
levels. If you want to change the light level or turn off the display light,
press and release the Light button until you reach the desired level. Refer to
page 9 for button identification.
DISPLAY LIGHT ON BATTERIES
When batteries are used, the display light can be turned on by pressing the
light button. The display light automatically goes off 2 minutes after the
last time you press any button.
Right Side View LOCK SWITCH
The Lock switch can be used when transporting the radio to prevent
accidentally turning it on. When the switch is pushed up you will see the Lock
symbol
appear on the display. It can also be used to disable all functions of the
radio when it is turned on. Push the switch down to release the lock for
normal operation.
HEADPHONE JACK
You can use a stereo or mono headphone with a 1/8″ (3.5 mm) plug. When you
insert the headphone plug, the speaker is disconnected. This radio delivers FM
in stereo through the headphones.
Lock Switch
Headphone Jack
RESET HOLE
Once in a while glitches may occur on any portable digital radio. This can be
caused by static electricity, unusual key strokes or a power disruption. If
this happens, use the end of a paper clip and push it into the hole briefly to
reset the radio. You will lose the clock time and all the stations stored in
memory when the radio is reset.
Bottom View
20
Reset CCRadio 3
Radio Operation
AUDIO & RECORDING JACKS The jacks on the back left side of the radio are for
audio input (AUX IN), audio output (LINE OUT) and a timer activation switch .
AUX In Jack Timer Activation Switch Line Out Jack
Left Side Back of Radio
AUX IN JACK The green jack, labeled AUX IN, is used to connect an external
audio source such as a CD Player or recorder, so you can listen through your
CCRadio 3’s speaker. To do this, you will need an appropriate patch cord (1/8″
(3.5mm) stereo).
Warning: If a “LINE OUT” is not available on your external audio source, you
can use the headphone jack. However, the volume must be kept low or damage to
the CCRadio 3 may result.
1. Plug your patch cord into the LINE OUT or Headphone Jack of your external
audio source.
2. Plug the other end into the AUX IN jack on the CCRadio 3.
3. With the power on, press and hold the AM-FM/AUX button until you hear a
short beep and AUX appears on the display.
4. Turn on your external audio source to hear the audio played through the
CCRadio 3.5) To turn the AUX off, press the AM-FM/AUX button again and the AUX
will disappear from the display.
NOTE: Volume can be controlled from the CCRadio 3.
CCRadio 3
21
Radio Operation
LINE OUT JACK The red jack, labeled LINE OUT, is used to output the audio from
the CCRadio 3 to another device such as a recorder, your home stereo, or some
other unit. To do this, you will need an (1/8″ (3.5mm) stereo) patch cord.
NOTE: The LINE OUT jack differs from a headphone jack because the volume level
of a headphone jack varies depending on the volume of the radio. The LINE OUT
jack has a set line level so the volume is consistent no matter what the
position of the volume knob.
1. Plug your patch cord into the LINE OUT jack on the CCRadio 3.
2. Plug the other end of the patch cord into the LINE IN or AUDIO IN of the
device you want to send the audio to and you will hear the radio through the
other source. You can still listen to the CCRadio 3 while using the LINE OUT
jack.
TIMER ACTIVATION SWITCH The black jack labeled with this symbol is for use
with a recorder that has a timer activated switch. You would use this switch
if you wanted to do a timed recording. It is used in conjunction with the LINE
OUT jack. See your recorder’s instructions to determine if this function will
work with your recorder.
SETTING THE TIMER Please read this entire section carefully before you start.
You must go through the 3 steps listed below without stopping. If you stop for
more than 15 seconds, press and hold the Timer Button until you hear a single
beep. Then start at step one again.
Before you begin, program the stations that you will want to record into
memory. Refer to page 14 for instructions on programming memory presets. The
timer has an ON TIME and an OFF TIME. You must set both in order for the timer
to work correctly.
STEP 1: TO SET THE ON TIME 1. Press and hold the Timer/Set Button until you
hear a beep and see the
word ON, the hour digit and TIMER flash on the display.
2. Use the Tuning Up/Down Buttons to set the hour, verifying that the time is
set correctly for AM or PM as shown on the display.
3. Press the Timer/Set Button again so the minutes and the word ON and TIMER
flash on the display.
4. Use the Tuning Up/Down Buttons to set the minutes.
22
CCRadio 3
Radio Operation
STEP 2: TO SET THE OFF TIME 1. Press the Timer/Set Button again until the word
OFF, the hour digit and
TIMER flash on the display.
2. Use the Tuning Up/Down Buttons to set the hour. Again, verify that the
time is set correctly for AM or PM.
3. Press the Timer/Set Button again so the word OFF and TIMER and the
minutes, flash on the display.
4. Use the Tuning Up/Down Buttons to set the minutes.
STEP 3: TO SET THE FREQUENCY 1. Press the Timer/Set Button again to select
your desired frequency.
The word TIMER and the memory preset will flash on the display. Using the Band
Button, select the appropriate band [AM, FM, Ham (VHF) or WX]. Press the
memory button 1-5 that corresponds with your desired station.
2. You must Press the Timer/Set Button again to complete the setup.
The timer will go ON and OFF at the same time and same station every day until
you turn the timer off or reprogram it.
TO TURN OFF THE TIMER If TIMER is showing on the display then the Timer is
set. Press and hold the Timer/Set Button until you hear a short beep and the
word TIMER disappears from the display.
NOTES ON THE TIMER The timer can be used to play your favorite program every
day.
To stop the timer from going off every day press and hold the Timer/ Set
Button until you hear a short beep the word TIMER disappears.
Once the timer is programmed, you may use your radio as normal. If you are
using the radio during a “timed” operation, the radio will automatically
switch to the programmed station, and turn off at the programmed OFF time. The
word TIMER flashes while the radio is playing in Timer Mode.
CCRadio 3
23
Specifications
FREQUENCY COVERAGE FM Band: 87.5 – 108 MHz Stereo AM Band: 520 – 1710 kHz Ham
(VHF): 144 – 148 MHz
WEATHER BAND
Channel 1: 162.400 MHz Channel 2: 162.425 MHz Channel 3: 162.450 MHz Channel
4: 162.475 MHz Channel 5: 162.500 MHz Channel 6: 162.525 MHz Channel 7:
162.550 MHz
ROTARY TUNING KNOB RESOLUTION
AM – 1 kHz FM – 50 kHz Ham (VHF) – 5 kHz WX – 1 Channel
POWER SOURCE
AC 120 Volts 60Hz. Batteries: (4) “D” size.
POWER CONSUMPTION
AC Power: 8 Watts. Battery Power: 40-50 mA DC.
AUDIO
10% THD at output power @ 1.8 Watt AC typical and @ 0.9 Watt Battery. Speaker:
5″, 4 Ohm, 6 Watts.
ANTENNA
FM, Ham (VHF) and Weather Band: Telescopic whip antenna. AM Band: Built-in
Ferrite Bar – 7/16″ dia. x 8″ long (200 mm).
DIMENSIONS 11″ W x 6-1/2″ H x 4″ D (at the base).
WEIGHT Approximately 3.8 pounds without batteries.
24
CCRadio 3
Specifications
AUX IN JACK 300 – 1000mV RMS (line level) input from external audio source. Do
not overload.
LINE OUT JACK 300 – 1000mV RMS (line output)
TIMER ACTIVATION SWITCH Low impedance, transistor driven switch. Used for
operation of external recording devices.
WARRANTY: 1 Year Limited Warranty. NOTE: Specifications are subject to change
without notice.
CCRadio 3
25
Troubleshooting Guide
The CCRadio 3 will not turn on and none of the buttons work: The Lock Switch,
located on the right side of the radio between the tuning and the volume
knobs, is in the up position. Push the switch down to release the lock and
resume normal operation of the radio. (Please see Lock Switch on page 20.)
The CCRadio 3 comes on by itself or changes to a different station while I’m
listening: The Timer has been set. The word TIMER will appear in the display
if the Timer is set. To cancel the Timer setting, press and hold the Timer/Set
button until you hear a short beep and the word TIMER disappears from the
display.
My radio shuts off after a few seconds or shows the letter “E” in the display:
Low batteries can cause this situation. Replace them with a new set of
batteries. If the radio is operating on the power cord, check for solid
connections at the wall outlet and the back of the radio. Also make sure there
is power at the wall outlet.
Stations won’t hold in memory: The memory button settings are being
overwritten. When recalling a station from memory, if you hold the memory
button down too long it will program the current station over your previously
stored station. To recall a station that has been stored in memory, always
press and release the button quickly. To program a new station into memory,
tune to the desired station and then press and hold the memory button for two
seconds until you hear a beep. Also, please see the section on Memory Tuning
on page 14.
The AM reception is poor inside of my building: Many building materials have
adverse effects on AM band listening. Brick, concrete, stucco, and aluminum
siding all have a tendency to absorb or reflect the AM signal. Spanish tiles
or metal roofs are also culprits. To test your AM reception, put batteries in
your radio and take it outside of the building, especially at night. If your
reception is notably stronger outside than inside the building, an external AM
antenna may be necessary to bring the signal into the building. See the AM
Tuning and Listening Tips section on page 29 for a quick and easy antenna.
26
CCRadio 3
Troubleshooting Guide
Poor reception on FM, Ham (VHF), or Weather band:
The CCRadio 3 uses its telescopic, or ”whip” antenna for FM, Ham (VHF), and
the weather bands. To improve reception of these bands, fully extend the
telescopic antenna. Reception of FM and weather broadcasts is normally
improved with the antenna extended straight up. NOTE: The antenna must be
fully extended to allow it to rotate. You can also try a piece of any type of
insulated wire about 36″ long. Remove about 1″ of the insulation from one end
of the wire. Wrap the bare wire around the telescopic antenna or use an
alligator clip. Try various orientations of the wire and different heights of
the telescopic antenna to obtain the strongest signal. If you want an antenna
that is pre-made, we recommend the FM Reflect-2 Antenna by C. Crane. (See Page
30).
Battery Power Level Indicator doesn’t show full charge when using rechargeable
batteries:
Rechargeable batteries will never show a full charge on your radio’s display.
The CCRadio 3 is calibrated to read the charge of your Alkaline batteries,
which is 1.5 volts at full charge. Rechargeable batteries, however, are fully
charged at just 1.25 volts, and so your radio will show a partial charge even
if the rechargeable batteries have been fully charged.
AM Alignment Procedure The CC Radio 3 has a remarkable (hidden) AM Calibration
Feature. You can “re-tune” the radio for the best possible reception on each
AM station. When you calibrate the radio, you will lose any stations you
memorized, the time and alarms set. To maintain the best AM reception, you may
want to perform this procedure when the radio has been moved to a new
location. You can also do it every year or two to compensate for the normal
aging of components. All components age with time in all electronics. The
calibration only affects the AM band.
1. Turn the power “On” and switch to “AM” band.
2. Press and Hold the “Clock” button for 6 seconds until the radio beeps and
the red indicator light comes on. Release.
3. Briefly tap the “Clock” button once.
4. You will see the display begin the calibration at 1710 and move to 520 at
100 KHz steps. Do not turn the power off during this procedure or you will
have to start over.
5. When done calibrating you need to “Reset” the radio by using a paper clip
in the hole on the bottom of the radio marked RESET. Press once gently and
release. Done!
CCRadio 3
27
Radio Noise Troubleshooting
AM RADIO NOISE PROBLEMS AND POSSIBLE SOLUTIONS If you hear an annoying buzz
when listening to AM radio, it’s most likely radio noise. Here are some of the
usual culprits:
· Dimmer switch (even in an adjacent room). · Lights: Fluorescent light,
“touch lamp” type fixtures, automatic night
lights, motion-activated outdoor lights, dying bulbs, blinking bulbs. · Nearby
televisions, computers, cell phones, tablets, wireless chargers or
C-Pap machines. · Electronic bug and pest controllers. · Faulty electrical
switch. · Radio scanners. · Dirty insulators on a nearby power pole. ·
Electric blanket. · Smoke detectors that run from an AC current (battery
operated units
are OK).
Now what can you do about it?
· Turn off the circuit breakers to see if the noise stops, and if the source
comes from inside your house. Turn off one circuit at a time to isolate the
source of the noise.
· Using a battery-operated radio, check if the interference comes from the AC
120V line, through the air, or both. To locate the direction of the noise,
turn the radio until you hear the loudest noise. The front and the back of the
radio will point to the noise origin.
· If the noise comes from outside, carry the radio around the neighborhood to
check for the origin of the noise. Ask your neighbors if they hear the same
noise.
· If you suspect a power pole, call the utility company. Dirty power pole
insulators are sometimes a cause of hard-to-find radio interference.
· Sometimes grounding can greatly reduce the hum from AC line noise.
Unfortunately, most radios do not have a ground connection. Finding a good
earth ground may also be difficult.
For more detailed information, please visit www.ccrane.com/radionoise.
28
CCRadio 3
AM Tuning & Listening Tips
Most portable radios including the CCRadio 3 have an internal AM antenna. Best performance is achieved when the radio is swiveled on its base for maximum signal pickup from the transmitting tower. This same technique can be used to help nullify unwanted signals or radio noise.
Experimentation is the best way
to see how it works for you. The
CCRadio 3 automatically fine tunes the Twin Coil Ferrite® AM antenna for
Top View CCRadio 3
a few seconds after a station is changed in AM mode. The “signal” icon will
flash during this time. For best tuning wait for signal to stop flashing or 5
seconds after tuning before setting a Memory Preset.
The CCRadio 3 has an external antenna terminal for AM. If your reception is better outside, try this quick and easy antenna: Use 50′ of insulated wire attached to the AM antenna terminal. Also try a ground wire attached to the ground terminal. Go to ccrane.com/radionoise for more information about a good grounding method. Run the antenna wire inside around a window or along a baseboard, or if possible, the wire should be mounted outside at least three feet away from the face of a metal building or it may not work. Where an outdoor antenna is not possible, try an inductive AM antenna. The antenna can be placed on a window sill or close to the radio to provide a better signal.
SAFETY DIRECTIONS AND PRECAUTIONS FROM YOUR ANTENNA SUPPLIER SHOULD BE FOLLOWED TO PREVENT INJURY FROM LIGHTNING OR ANY ACCIDENT WITH ALL ANTENNAS.
External Antenna Terminal for AM
Ground Terminal
Left Side Back of Radio
The CCRadio 3 is made for distant or weak AM signal listening. Daytime
reception is limited to about 300 miles maximum because you can only receive
the signal directly from the transmitter site. You may receive AM stations
thousands of miles away at dawn, dusk and at night, depending on the time of
year and atmospheric conditions. The ionosphere is a layer of ions above the
earth. At night it slows and congeals into a giant mirror and can reflect
radio waves back to the earth, allowing you to receive signals much farther
away than during the day. Distant listening is called DXing. One club that is
devoted to DXing is National Radio Club at:
PO Box 473251, Aurora, CO 80047-3251. They maintain a website at:
http://www.nationalradioclub.org
CCRadio 3
29
Accessories Visit ccrane.com for the following accessories:
Softspeaker® 3K Amplified Pillow Speaker with In-Line Volume Control and Sleep
Timer Item #: PS3K
FM Reflect-2 FM Dipole Antenna Item #: FMR2
CCRadio Carry Case Custom made in the USA to fit and protect the CCRadio 2, 2E
and 3, while providing a sturdy carry handle. There is a pouch in the back to
stow the power cord and possibly a Softspeaker Pillow Speaker or some CC Buds
Pro earphones. Also, the case will not interfere with the operation of the
radio. Item #: CA3
30
CCRadio 3
PERSONAL STATION LOG
City
Station Call Letters
Frequency
Date & Time
Please feel free to copy this page.
CCRadio 3
31
MODEL: CCRADIO 3
FCC ID: BYG CCR3 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS. 1. THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND 2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTICE:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
172 Main Street Fortuna, CA 95540-1816 Phone:
1-800-522-8863 Web: ccrane.com
Copyright © 2024 C. Crane. All rights reserved. No part of this booklet may be
reproduced, in any form or means whatsoever, without permission in writing
from C. Crane. (Rev. 13) 32
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>