Sun Home SAUNAS Red Light Therapy FACEMASK User Manual

: June 30, 2024
: Sun Home SAUNAS

Table of Contents

Red Light Therapy FACEMASK
Product Information
Specifications
- Product Usage Instructions
1. Getting Started
2. Cleaning & Storage
3. Safety Instructions
4. Troubleshooting
- Frequently Asked Questions (FAQ)
Q: What do the different light modes signify?
Q: How do I know when the controller is fully charged?

Red Light Therapy FACEMASK

“`html

Product Information

Specifications

Product Name: Red Light Therapy Facemask
Power Levels: Three power levels
Warranty: 1-year limited warranty

Product Usage Instructions

1. Getting Started

Unplug your controller from the wall and plug the mask USB
directly into the controller.
Press and hold the power button to turn on the mask.
Press the timer button to adjust the length of your
session.
Press the M button to switch between red/amber/infrared and
blue mode.
Press the button below the M button to adjust the power of the
masks.
Start at the lowest power level for your first session.
Press and hold the power button to turn off the mask after your
treatment.
Plug the controller into the wall to charge. Unplug the mask
before charging the controller.
The flashing symbol indicates charging. When the light stops
flashing, the controller is fully charged.

2. Cleaning & Storage

After each use, clean the mask according to the provided
instructions. Store it in a cool, dry place away from direct
sunlight.

3. Safety Instructions

Read the safety instructions in the manual carefully before
using the product. Avoid using the product in wet conditions.

4. Troubleshooting

If you encounter any issues with the product, refer to the
troubleshooting section in the manual or contact customer support
for assistance.

Frequently Asked Questions (FAQ)

Q: What do the different light modes signify?

A: The red/amber/infrared mode is for specific skin benefits,
while the blue mode serves a different purpose.

Q: How do I know when the controller is fully charged?

A: The flashing symbol on the controller indicates that it is
charging. When the light stops flashing, the controller is fully
charged.

“`

RED LIGHT THERAPY
FACEMASK

TA B L E O F C O N T E N T S
2 READ BEFORE USE 3 OVERVIEW & BENEFITS 4 SAFTEY & ELECTRICAL 6 GETTING STARTED 7 CONTROLLER OPERATION 8 CLEANING & STORAGE 9 TROUBLESHOOTING 10 TECHNICAL SPECIFICATIONS 11 WARRANTY INFORMATION
1

READ BEFORE USE
· PLEASE READ THIS ENTIRE MANUAL, ESPECIALLY SAFTEY INSTRUCTIONS.
· Before your first treatment, you must complete a sensitivity test. Please use the mask on your arm for 10 minutes and see if there is any overheating, redness or itchiness.
· Before use, it is important to fully charge the Sun Home face mask battery
· To charge, insert the micro-USB cable into the controller and insert the USB connector into the USB port of the power supply
· You cannot use the face mask while the controller is charging.

OVERVIEW AND BENEFITS
· As we age, our skin loses collagen and elasticity. Aging skin becomes more susceptible to sunspots and pigmentation.
· The Sun Home face mask uses wavelengths (600nm to 850nm) of red and infrared light that are studied to increase collagen production and reduce the appearance of fine lines and wrinkles through the science of photobiomodulation.
· The Sun Home red light face mask has been shown to increase blood flow and reduce signs of aging, leaving the skin relaxed, softer, and smoother.
· The silicone material and Velcro straps allow you to efficiently get results from the therapeutic LED lights.
· The blue light option allows you to kill bacteria or any impurities in your pores that may cause blemishes
· Mode 1: red light + amber light + near infrared light · Mode 2: blue light · · Remove plastic film and discard. · · Attach optional eye pieces if you desire

2

3

SAFETY INSTRUCTIONS
· You have purchased an electrical device. Please use common sense for safety. Do not plug into a mechanically or eclectically unstable, or otherwise faulty, compromised or intermittent outlet. Contact Sun Home Saunas with any questions (info@sunhomesaunas.com).
· Do not use to treat any other conditions, besides signs of aging, including sunspots, acne, scars, and wrinkles.
· Please consult your doctor before use if you are pregnant, planning on becoming pregnant, or breastfeeding.
· Do not use if you have genetic eye conditions, suffer from lupus erythematosus, photosensitive eczema, albinism, photosensitive disorders or sensitivity to light
· Do not use if you are taking any medication that causes photo sensitivity such as certain antibiotics, chemotherapy drugs, and diuretics. If you are unsure, please consult your doctor.
· Other substances that may cause photosensitivy include St John’s Wort, coal tar, deodorants, antibacterial soaps, artificial sweeteners, naphthalene (mothballs), petroleum products, brightening agents found in laundry detergent, and cadmium sulphide (a chemical injected into the skin during tattooing).

ELECTRICAL CONNECTION & ELECTRICAL SAFETY
· CHARGE ONLY WITH A CERTIFIED USB CHARGER COMPATIBLE WITH THE VOLTAGE USED IN THE COUNTRY YOU ARE IN. Output must be 5v DC.
· A universal USB converter that is rated for 100-240 VAC input may be used in any country.
· A USB converter that is rated for 120 VAC input must only be used in the US.
· Do not immerse controller in water or any liquid.
· Store with the cord loosely gathered, not wrapped around the controller.
· Pets may damage the product or be injured by it. Take care to keep them away whether it is powered on or not.
· Examine the wires and controller connection each time the device is used.
· You may email Sun Home Saunas with any questions (info@sunhomesaunas.com) and include a photo of any damage.

4

5

GETTING STARTED
· For best results, treat for 3-5 times a week. · Most people see results after 4 weeks. · Adjust the straps so that the mask fits comfortably on your face. · Thread the straps through the inlet holes on either side of the
device. · Loop the straps around the back of your head and secure firmly. · Readjust straps if necessary. · Clean face before treatment and don’t use with any lotions or oils.

CONTROLLER OPERATION
1. Unplug your controller from the wall and plug the mask USB directly into the controller.
2. Press and hold the power button to turn on the mask.
3. Press the timer button to adjust the length of your session
4. Press the M button to switch between 1) red/amber/infrared and 2) blue mode
5. Press the button below the M button to adjust the power of the masks.
6. There are three power levels. We recommend starting at the lowest level for your first session.
7. Press and hold the power button to turn of the mask after your treatment.
8. Plug the controller into the wall to charge. You must unplug the mask before charging the controller.
9. The flashing symbol means that the controller is charging. When the light stops flashing, the controller is fully charged.

6

7

CLEANING & STORAGE
· Ensure the device is off when cleaning.
· Clean the mask using a water-based cloth.
· You may use a light household cleaner or alcohol solution to gently wipe down mask.
· Store the mask flat and room temperature in dry conditions.
· Avoid storing the mask in dusty conditions.
· If you should dispose of the mask, please do you part in protecting the environment properly dispose of the controller, which contains a lithium battery.

TROUBLESHOOTING
· No light coming from mask: · Controller may not be charged · Controller may still be connected to an electrical outlet
· LEDs do not turn off after the time set on the controller: · The device may be faulty please reach out to info@sunhomesauans.com
· Lights are flickering during treatment: · The mask wire may not be fully inserted into the controller
· DO NOT attempt to repair or modify the device in any way

8

9

TECHNICAL SPECIFICATIONS
· LEDs: blue, red, amber, near infrared (600-850 nm) · Program time: 10 30 minutes fixed · Storage and transport temperature: -5°C to 55°C · Operating humidity: 30% to 95% without condensation · Storage and transport humidity: 20% to 85% without condensation · Mains electrical input from power adapter: 100-240Vac, 50/60Hz.
0.25A · Electrical output: 5V

10

WARRANTY INFORMATION

PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE SETTING UP OR USING THIS PRODUCT. This 1-year, limited warranty applies to repair or replacement product found to be defective in material or workmanship.

To the extent permitted by law, these warranties are exclusive and there are no other expressed or implied warranties or conditions, including warranties or conditions of merchantability and fitness for a particular purpose.

A: This warranty does not apply to any damage resulting from commercial, abusive, unreasonable use or supplemental damage. Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty. SUN HOME SAUNAS OR THEIR OWNERS ARE NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an applied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights which vary from jurisdiction to jurisdiction. This warranty applies only to the original purchaser of this product from the original date of purchase.

B: At its option, SUN HOME SAUNAS will repair or replace this product if it is found to be defective in material or workmanship.

C: This warranty does not cover damage resulting from any unauthorized attempts to repair, or from any use not in accordance with the instruction manual.

D: This warranty applies only if the unit is purchased new from SUN HOME SAUNAS and is non-transferable from the original purchaser of the item. Call, email or write us at:
Sun Home Saunas Customer Support
1804 Garnet Ave, #216 San Diego, Ca 92109
Email: info@sunhomesaunas.com

IMPORTANT: If you experience a problem, please first contact our customer support

center as soon as possible. We can help solve your problem before deciding to return

the product. Follow the user manual for correct operation. Do not attempt to

disassemble the product or change any of the original parts or accessories. Doing so

may void your warranty and cause damage to the product or personal injury. Please

call us and we will advise you.

11