LULE EL-GT1 Wireless Headphones Instructions

LULE EL-GT1 Wireless Headphones

Please read this instruction manual carefully before using the product and keep it properly.

Product Overview

1. “ANC” button
2. External mic interface
3. Charging interface (Type-c)
4. – button
5. POWER button
6. + button

HOW TO CONNECT

When using the headphones for the first time, pair the device.

Before pairing, check the following:

• Place the connected device within 1 m of the headphones.
• The headphones are fully charged.

Pairing

• Press and hold the power button ” ll\ZQJ” for 2 seconds, When you hear the prompt sound, the power icon.
• Open the Bluetooth interface of the mobile phone, search for” EL-GTl “, click to connect phone with a connection record, there is no need to pair repeatedly.
• Re-pairing: When the headset is off, press and hold the power button for 5 seconds to clear the Bluetooth pairing record.
• If necessary, tum off the headphones and repeat the steps above to reconnect.

HEADSET CONTROLS

Turn on and Turn off

• Turn on: Press and hold the power button for 2 seconds, and a prompt tone appears
  Turn off: Press and hold the power button for 3 seconds, and a prompt tone appears

Re-pairing

• Press and hold the power button 11 for 5 seconds in the power-off state to force into pairing, the indicator flashes white and green alternately.
• Normal/ANC/Transparency mode.
• Normal mode: Normal, no need to click any buttons.
• ANC mode: Click the “ANC” key to sound a prompt sound.
• Transparency mode: Click the “ANC” key to sound a prompt sound.

All three modes re cycled through by the “ANC” key only normal mode can be used when making phone call.

Media operations

• Increase the volume: Short press the “+” button to increase the volume
• Lower the volume: Short press the” – ” button to decrease the volume.
• Previous song:  Press and hold the “ – ” button for 2 seconds
• Next song: Press and hold the ” +” button for 2 seconds.
• Play: Click the power key button.
• Timeout: Click the power key Power button.
• Voice assistant: Double-click the power button.
• Quit the voice assistant Double-click the power button.

Game mode

• Turn on: Double-click the “ANC” button and a prompt sound appears.
• Turn off: Double-click the “ANC” button and a prompt sound appears.

Call with actions

• Answer an incoming call: Short press the power button.
• Reject call: Press and hold the power button for 2 seconds.
• Hang up the phone: Short press the power button once.

LED indicator status
The LED indicator is located on the left, which shows the status of the headset.

• Power on state : If the pairing is not successful the white and green lights alternately flashing, and if is successful, the light turns off.
• Off state : The indicator light stays white and turns off after 2 seconds.
• Charing status : White lights are always on.
• Full charge status: White lights off.

External microphone interface:
After the microphone is connected, it automatically switches to a higher and clearer call sound.

The audio cable interface:
Plugged into the Type-c audio cable interface, and the bluetooth function is automatically turned off, switching to Aux-in playback.

PRODUCT INTRODUCTION

• Product name: Wireless Headphones
• Model: EL-GTl
• Input voltage DCSV
• Charging interface: Type-C
• Charging time 2hrs
• Bluetooth version 5.4
• Input current 500mA
• ANC effect 2Sdb
• Drive 40mm
• Impedance 16
• Usage frequency range 2.4G-2.48G
• Power level CLASS l
• Support agreements: a2dp\a’Vctp\avdtp\avrcp\ hfp\spp\smp\att\ gap\gatt\ rfcomm\sdp\l2cap profile
• charging power source 5V lA
• Packaging
  • Bluetooth Headset Body (1 I
  • Type-C Charging Cable (1)
  • Instruction Manual (1)
  • Microphone (1)

PRODUCTION DESCRIPTION

• Volume adjustment: In Android and Apple system, Apple system can adjust the volume of the phone simultaneously through the headset, while the volume of the headset and the phone may need to be adjusted separately in Android system.
• Charging Problems: Due to the characteristics of the structure, it is easy to be liquid erosion, daily use should pay attention to maintenance, try to avoid liquid splash to avoid liquid splashing that may cause short-circuit or poor contact.
• About the signal: Bluetooth transmission is the same wireless signal transmission principle as WIFI transmission. Affected by the usage environment, occasional signal disconnection is normal. It can usually be restored after a while or return to normal after leaving the current location with strong signal interference.
• About Game Mode : When you turn on the game mode, you will lose a little bit of music saturation, it is recommended to turn off the game mode when you are not playing the game.
• About wearing comfort: About the headset sound insulation and omission problems, it is related to wearing method, to avoid the headset ear sponge part is not completely closed in the ear, you can adjust the wearing angle and the degree of ear wrapping accordingly.
• About headphone sound isolation and sound leakage: When wearing headphone turn the volume to maximum. It is normal for same audio leakage to occur. If you want a more private sound isolating environment it is recommended to turn down the volume to normal and adjust the wearing angle to the best condition cannot place the headphones on the table tote.st sound leakage. Alt sound leakage tests need to be worn correctly on the head.
• About the audio cable: The equipped USB AUDIO cable is a multi-functional audio cable that can be used for both computer audio transmission and headphone charging. The headphones can also be charged at the same time while using the wired mode.
• Microphone radio compatibility issues : There will be some third-party software can not use the microphone function, which is the third-party software incompatibility problems caused by; not the headset itsetf, other brands of Bluetaoth headset on the market there will be third-party software incompatibility problems.
• ANC mode: After all ANC active noise is turned on, it mainly eliminates and reduces low-frequency environmental noise (such as the sound of cars d riving, the sound of machines running, wind, etc.}, and the reduction of human vaic.es (high-frequency decibels} will not be obvious. ~The ANC function does not support the use in the call mode.

FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>