LULE BLUETOOTH V5.3 Headband ANC Smart Noise Canceling Headphone User Manual

LULE BLUETOOTH V5.3 Headband ANC Smart Noise Canceling Headphone

Product Information

Product Name| LULE King ANC Intelligent Noise Cancelling Headphone
Bluetooth
---|---
Connection Name| LULE/King
Input Voltage| DC5v
Charging Interface| Type-C
Charging Time| About 2 hours
Bluetooth Version| V5.3
Input Current| 500mA
Battery Capacity| 1000mAh+NTC
ANC Effect| 42dB
Driver| 40mm
Impedance| 16
Usage Frequency Range| 2.4-2.4835GHz
Power Level| CLASS I
Support Agreements| A2DP/AVRCP/HFP/HSP
Charger| 5V/1A power supply[Type-c interface] (computer USB port, mobile
phone charger, car USB charger)

PRODUCT SPECIFICATIONS

PACKAGE LIST

1. Bluetooth Headphone X 1
2. Type C Charging Cable X 1
3. User Manual X 1
4. Microphone X 1

Brand new headphone series Compatible with IOS android smart phones/other electronics with Bluetooth

Overview

LULE King Bluetooth Over-Ear Smart Headphones with Hybrid Dual Mode Noise Cancellation Technology, which will bring you optimized noise reduction experience, excellent dual-feed noise reduction will bring you unprecedented peace & quiet experience.

Description of function keys

Bluetooth Pairing

1. Press and hold the power button “ ” for 2 seconds， the power on is successful when voice prompts .
2. Turn on the Bluetooth function of the phon,and on the pairing page, search for the device: LULE/King Click to complete the pairing
3. After the first pairing connection is successful, the headset will automatically connect to the previous mobile phone with connected record, no need repeat pairing
4. Repairing: When the headphones are off, press and hold the power button “ ” for 5 seconds to clear the Bluetooth pairing record If necessary, please turn off the earphones and repeat the above steps to reconnect

mode pairing

• Insert the adapter into the computer, after the headset is switched on, press the “ANC” button 4 times to enter the 2.4G pairing mode. For the first pairing, you need to press “+, -” at the same time for pressing 5S.
• After the headphone paired with the adapter, the LED light between the headphone and the adapter will lights off.
• Disconnect: Headphones Click the “ANC” button 4 times to exit 2.4g mode.
• In 2.4g mode, press the “+” and “-“button for 2 seconds, the headphones will clear the pairing record in mode.

ANC&transparency mode cannot be turned on in 2.4G mode.

Headset On & Off

• Power on: Press and hold the power button “ ”for 2 seconds, a prompt sound will appear
• Shutdown: Press and hold the power button “ ”for 3 seconds, a prompt sound will appear

Gaming mode

• Turn on the game mode: Double-click the “ANC” button, and the prompt sound will appear.
• Turn off the game mode: double-click the “ANC” button, and the prompt sound will appear.

Normal mode/ANC mode/Transparency mode

• Normal mode: no need to click any buttons
• ANC mode: click the “ANC” button, you will hear a prompt sound .
• Transparency mode: Click the “ANC” button ,a prompt sound will issued.
• The three modes are all switched by the “ANC” key

Only normal mode can be used during calls

Media operation

• Increase volume: Short Press the “+” button, the volume will increase, and it will prompt “beep” at the maximum volume
• lower the volume : Short Press the “-” button shortly, the volume will increase, and it will prompt “beep” at the maximum volume
• previous piece: Long press the “-” button for 2 seconds next track: Long press the “+” button for 2 seconds play Click the power button “ ”
• pause : Click the power button “ ” Wake up the voice assistant: Double-click the power button.

Call operation

• Answer call: Click on the power button
• Reject call: Long press and hold the power button for 2 seconds
• hangs up call: Short press the power button twice

To pair again
When power off, press and hold the power button  for 5 seconds to forcibly enter the pairing state. The indicator light flashes alternately in white and green.

LED indicator light status

• On status: Indicator light flickers white and green alternately
• Off status: Indicator white light remains on for 2 seconds Switching mode: Green light remains on for 10 seconds Charging status: Red light remains on, full charge remains off low charge status: When the battery is low,
• prompt Battery low ”once The red LED indicator light lights up every 10 seconds, followed by a prompt every five minutes for “Battery low

External microphone interface

• After the microphone is connected, it automatically switches to a higher and clearer call sound.

The audio cable
plugged into the Type-C audio cable interface, and the Bluetooth function is automatically turned off, switching to AuX-in playback.

• Please do not place this earphone in a damp, dusty, greasy or vapor area, or in direct sunlight.
• Listening to it at high volume may affect your hearing.
• Do not use headphones in areas where the inability to hear ambient sound can cause danger, such as railway intersections, train station platforms, pedestrian crossings, and construction sites
• Do not place heavy objects or apply pressure on this earphone, as it may deform during long-term storage
• Do not subject this earphone to excessive impact
• If you feel unwell after using the BLUET00TH device, please immediately stop using the BLUETOOTH device
• Long term storage or use may damage the ear pads
• If you have any questions or concerns about this earphone that are not covered in this manual, please contact customer service
• Do not place the device in an environment with a temperature below 0C or above 45 °C
• Do not use this device in thunderstorm weather Thunderstorms can cause abnormal operation of the device and increase the risk of electric shock
• Please do not use oil or other volatile chemical liquids to wipe the surface of this product, but alcohol can be used for daily cleaning and maintenance of the product

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>