BYSON BYDAPOB OmniBlend Drywall Access Panel Instructions

BYSON BYDAPOB OmniBlend Drywall Access Panel

Specifications

• Product Name: Byson OmniBlend Drywall Access Panel
• Product Code: BYDAPOB
• Strong | Sound | Unstoppable
• Neck size L1XW1 (mm): 205X205, 205X255, 305X305, 305X505, 305X605, 405X405, 405X605, 505X505, 505X605, 605X605
• Overall size L2XW2 (mm): 257X257, 275X325, 357X357, 375X575, 375X675, 457X457, 475X675, 557X557, 575X675, 657X657

Product Usage Instructions

1. Measure the neck size of the access panel.
2. Cut a hole on the wall or ceiling that is 5mm larger than the neck size.
3. Remove the door from the panel frame.
4. Fit the frame into the hole.
5. Secure the frame to the drywall using drywall screws.
6. Replace the door onto the frame.
7. If the panel needs to blend with the surrounding wall, finish the door with normal drywall finishing methods such as mudding, sanding, and painting.

FAQ

• Q: What should I do if the access panel is larger than the available opening?
  A: If the access panel is larger than the available opening, you may need to resize the opening by carefully cutting away excess material to ensure a proper fit.

• Q: Can I install the access panel on a ceiling?
  A: Yes, the access panel can be installed on both walls and ceilings. Follow the same installation guidance provided in the manual.

• Q: How do I maintain the access panel?
  A: To maintain the access panel, periodically check for any loose screws or hinges. Clean the panel surface with a damp cloth if needed.

General Schematic

Definitions

• Neck size: Size of the opening that would be cut into the wall/ceiling to install the access panel. Depicted via L1, W1 in schematic
• Opening size: Cited in listing title. Size of opening available for access once panel is installed
• Overall size: Total size of access panel as visible once installed. Depicted via L2, W2

Size chart

Other specifications

• 1.2mm extruded aluminum profile frame
• White powder coating finish
• 12.5mm moisture resistant gypsum board
• Mini latch push to open
• Safety wire and hook
• Brush seal between frames
• Spring loaded hinge door fully removable
• Made in China

Installation Guidance

1. Measure neck size of access panel
2. Cut hole on wall +5mm larger than neck size
3. Remove the door from the panel frame
4. Fit the frame to the hole
5. Fix frame on the drywall using drywall screws
6. Replace the door on the frame
7. For applications where panel is to match the surrounding wall, finish the door as with normal drywall finishing, ie mudding, sanding and painting

www.bysonproducts.com | sales@bysonproducts.com | +1 647 598 8853

References

• Byson | Byson
• Byson | Byson

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>