KIND LED X220 X Series Targeted Full Spectrum LED Grow Light

WELCOME TO THE FAMILY

Thank you for your purchase! We’re committed to providing you with the highest quality grow lights and customer service. If you have any questions or suggestions, our customer service team is ready to help.

X750 DRIVER INSTALLATION VIDEO

GROW STRONG SUPPORT

OVERVIEW

SPECIFICATIONS

COMPONENTS

SET UP

1. The X220, X330, & X420 X SERIES come fully assembled, ready to grow. Unpackage the fixture and place the light on a safe and stable area directly below the desired hanging location.
2. CAUTION: The LED boards have a conformal coating to resist moisture, but are vulnerable to diode damage if handled improperly. Please make sure LED surfaces are protected from abrasion while handling.
3. For X750 Only. If you plan on mounting the driver remotely, with the optional 8′ DC power cord, skip this step. Locate the driver mounting brackets and use the flat head screws to attach the brackets to the fixture. Mount the driver to the brackets using round head screws.

• Flat head screw – Bracket to fixture
• Round head screw – Driver to bracket

1. For X750 Only. If you plan on mounting the driver romotely, with the optional 8′ DC power cord, skip this step.
2. Attach the DC output power cord from the driver to the two connections on the fixture.
3. The X750 does not use wire hangers. Attach the ratchet hangers directly to the eyelets.
4. Attach one wire hanger to each end of the light fixture through the metal mounting eyelets found on the top side of the fixture. Lower the ratchet hangers to the center of the wire hanger and connect. Raise the light to the desired position.

POWER CORDS & CABLES

POWER CORDS

The KIND LED X SERIES X220, X330, & X420 come with a 6′, 120 V standard power cord, as well as a 6″ (installed) and 3′ DC output cord (not included in the X750). An 8′ DC output cord for the X750 can be purchased at growstrongindtusties.com. For alternative power cord recommendations, please contact a KIND LED Grow Lights customer service representative to assist in your selection.

DRIVER

The driver for the KIND LED X SERIES is capable of being mounted remotely. First, disconnect the original DC output cord from the fixture and the driver. Remove the four (4) mounting screws with a Phillips-head screwdriver. Securely mount the driver in its new location (within 3′ for X220, X330, X420, & with in 8′ for X750) and connect the extended DC output cord to both the fixture and the driver.

BEST PRACTICES

SPECTRUM ADJUSTMENT

• The spectrum and intensity of the light can be manually controlled through the rotary dials on the front of the driver.
• Channel 1 is a targeted full spectrum channel and should always be on. Intensity of this channel will vary for clones, seedlings, and younger plants.
• Channel 2 contains the IR and UV, as well as some additional deep reds, for an enhanced flowering spectrum.
• Please see the chart for recommended intensity levels.

ENVIRONMENT

When using the KIND LED X SERIES, ideal grow room temps should be around 80-85°F. Any lower than this and transpiration can slow, stunting growth. Any hotter than this and heat stress can form.

NOTE: High PPFD growing conditions require high levels of attention to detail including proper feeding and CO2 augmentation. For more information, please visit kindledgrowlights.com

RECOMMENDED HANGING HEIGHT

The KIND LED X SERIES is designed to excel in close proximity environments but can be used in a variety of applications. For best practices, a minimum height of 6″ above the canopy is recommended. The ideal recommended hang height above canopy is 12″ to maintain the greatest intensity over the largest footprint. To maintain usable intensity at a greater distance, a maximum hang height of 18″ above the canopy is recommended. For applications that require less intensity, such as Cloning Stages and early Vegetative Stages, a hang height greater than 18″ above canopy may be suitable.

YOU’RE READY TO GROW STRONG

For more information on this fixture and all available options, contact a KIND LED Grow Lights customer service representative at kindledgrowlights.com or call 855-448-4769.

WE WANT TO SEE YOUR GROW!

FOLLOW & TAG US ON INSTAGRAM

• @kindledgrowlights

• kindledgrowlights

LEARN MORE ABOUT THIS LIGHT & OTHER PRODUCTS

• growstrongindustries.com

FCC COMPLIANCE STATEMENT

The KIND LED X SERIES lighting system has been tested at FCC-certified laboratories in the United States and conforms to FCC’s Part 15B Consumer Standard for Industrial, Scientific, and Medical Equipment for both conducted and radiated emissions. Given that all electronic equipment emits some RF energy, please note that compliance with these standards does not mean a zero level of emission, only very low levels.

Per FCC requirement: This product may cause interference to radio equipment and should not be installed near Maritime safety communications equipment or other critical navigation or communication equipment between 0.45-30 MHz. This device complies with Part 15B of the FCC Rules. Changes or modifications not expressly approved by KIND LED could void the user’s authority to operate the equipment.

Please visit www.KindLEDGrowLights.com for complete documentation of the KIND LED Lighting Terms of Use. Thank You.

CAUTION: HIGH INTENSITY LED GROW LIGHT

• THIS LED EMITS INTENSE UV LIGHT
• DO NOT LOOK DIRECTLY AT LIGHT WHILE ON
• WEAR PROPER EYE PROTECTION WHEN THE LIGHT IS OPERATIONAL
• KEEP OBJECTS FROM COMING INTO CONTACT WITH THE SURFACE OF THE LIGHT

PH: 1-855-448-4769
WEB: support.growstrongindustries.com

GROW STRONG INDUSTRIES

BELIE VES GROWING FOOD &PLANT MEDICINE IS A HUMAN RIGHT

References

• Indoor Grow Supplies and Hydroponic Equipment - Grow Strong Industries Indoor Growing & Hydroponic Supplies
• LED Grow Lights - Full Spectrum Kind LED
• GSI Customer Support - Grow Strong Industries
• LED Grow Lights - Full Spectrum Kind LED

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>