DYNAVIN D8-UFT02 Adaptor for Fiat Ducato Installation Guide
- June 28, 2024
- DYNAVIN
Table of Contents
D8-UFT02
Installation Guide
CAN-bus adapter D8-UFT02
CAN-bus adapter for remote control of the most important functions of a Dynavin radio via steering wheel buttons, if present in the vehicle.
- Supports multifunction steering wheel
- Synchronisation of time
- Synchronisation of language menu
- for Fiat Ducato III 250/251 2006-2011, Ducato III EURO 5 250/251 since 2011, Citroen Jumper II 250/250D/250L since 2006, Peugeot Boxer II 250/251 since 2006
- for the vehicles with factory Fiat radios
- Infotainment steering wheel adapter
- Control via the steering wheel buttons
For use in Citroen / Fiat depending on the original radio
The factory settings of your vehicle might not align perfectly with the instructions above. If the error warning on the speedometer persists, please try all suggested wiring methods, including leaving the connector empty, until the dashboard error warnings are resolved.
Dynavin GmbH
Siemensstr. 7
76316 Malsch
Germany
© 2024 Dynavin GmbH
All rights reserved.
Reprinting and reproduction, even in part, is prohibited.
The characteristics of the products are correct at the time of creation of the
printed product.
The colour of the products may vary.
We accept no liability for any typesetting errors.
Check with your dealer whether the actual specifications meet your
requirements.
We reserve the right to make changes.
D8-UFT02 Installation Guide
Rev. 3.0
Documents / Resources
|
DYNAVIN D8-UFT02 Adaptor for Fiat
Ducato
[pdf] Installation Guide
D8-UFT02, D8-UFT02 Adaptor for Fiat Ducato, D8-UFT02, Adaptor for Fiat Ducato,
Fiat Ducato, Ducato
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>