Ningxia Shubeige E Commerce JX-05S Multifunction Mobile Phone Bluetooth Ring Remote Control Instructions
- June 3, 2024
- Ningxia Shubeige E Commerce
Table of Contents
Ningxia Shubeige E Commerce JX-05S Multifunction Mobile Phone Bluetooth
Ring Remote Control
Product introduction
The video/reading remote control supports short videos (Tik Tok, Kuai shou, Weishi, etc.) and the page-turning function of individual mobile phone reading APPs, supports adjusting the volume of the mobile phone to increase or decrease, and truly releases both hands! It is also a selfie remote control, when watching short videos , take a beautiful selfle!
Specifications
- Applicable system : video/reading/selfie remote control
- Support iOS 15.0/Android 8.0 and above
- Bluetooth version: Bluetooth 5.3
- Transmission frequency : 2.4-2.4835GHz
- Working voltage: 3.9-4.2V (polymer lithium battery)
- Operating temperature: 0-50°C
- Communication distance: 25m
Button function description
- Press and hold for 5 seconds to and off, press and hold for 2 seconds to lock the screen, to pause, double-click to like
- Click to page up, and long press to decrease the volume
- Click to page down, long press to increase the volume
- Click left to page, long press to play the previous song
- Click right to turn the page, long press to play the next song
- Indicator light
- Press the 2 and 3 keys at the same time to enter the moving point mode
Instructions for use
The operation ls as follows (iPhone X, iOS15.2):
Press and hold the G) button for 3 seconds to turn on the power, when the blue
indicator flashes, search in the Bluetooth of the mobile phone, the Bluetooth
device name: JX-05S, after successfully pairing with the Bluetooth of the
mobile phone, enter the short video APP, take the Douyin short video APP as an
example: Press the G) button to play or pause the video, double-click the G)
button to like the video, and press the(%)® button to flip the video up, down,
left and right (subject to the actual situation}. For details, refer to the
function key operation. iOS15.0 and above versions need to be set before use.
The settings are as follows: Settings -4 Accessibility-4 Touch -4 Assistive
Touch -4 On, and a dot appears. If the dot is not on the camera button, you
can adjust the mouse dot, and the settings are as follows:
Douyin to record video as follows: Press button 2 and button 3 at the same
time to light up, enter the adjustment mode, click button 2 to move the point
up, click button 3 to move the point down, cllck button 4 to move the point to
the left , click the 5 button to move the point to the right, after moving to
the recording point, click the 1 button to confirm the video recording, and
click the 1 button to complete the recording.
If the user feels that the sensitivity of the remote control is poor or
strong, you can adjust the [Tracking Sensitivity] under Execute Touch Gesture
to a satisfactory sensitivity; [Execute Touch Gesture] must be turned on, as
shown in the figure below.
Simulates fingers when performing gestures with a pointing device. When enabled, apps may recognize some gestures differently.For example,scrolling maytake precedence overtext selection.
- In the remote control search or connection state, if there is no operation for 15 minutes (depending on the model), the remote control will enter the sleep state, just short press the 1 button to wake up immediately, continue to search or automatically reconnect. When not in use, press and hold the 1 button for 5 seconds to turn off the device.
- Put it into the remote control compartment to automatically shut down, pick it up and automatically turn it on to connect.
- The Android version of the mobile phone can be used after Bluetooth pairing.
- If the mouse or dot is not on the camera button, please refer to Setting 1.
- Tip: If this product cannot be used due to the upgrade of the iOS system, it is a force rnajeure.
FCC Regulations
This device complies with part 15 of the FCC Rules. 0 operation is subject to
the following two conditions: (1) this device may not cause hannful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digit.al device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet the general RF exposure requirements.
The device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>