Vigoro INST-VIG-FS-RV0 No Dig Faux Stone Edging Kit Installation Guide
- June 28, 2024
- Vigoro
Table of Contents
INST-VIG-FS-RV0 No Dig Faux Stone Edging Kit
“`html
Specifications:
- Product Name: No-Dig Faux Stone Edging Kit
- Model Number: INST-VIG-FS-RV0
Product Information:
The No-Dig Faux Stone Edging Kit provides a convenient and easy
way to create borders for your landscaping projects. The kit
includes edging pieces, anchoring spikes, and features an
overlapping post system for seamless borders.
Usage Instructions:
1. Preparation:
Clear the installation area of grass, loose soil, and debris
before starting. Ensure the soil is solid and level. Compact the
cleared soil to reduce spike movement from shifting ground and
frost heave.
2. Installation:
-
Slide the edging pieces together so anchoring tabs
overlap. -
Hammer anchoring spikes on each end of the installation and at
connection points to secure the edging. -
Backfill with mulch, river rock, or other ground cover,
ensuring tabs are completely covered with a thick layer of bedding
material.
3. Connection System:
The overlapping post system stabilizes joints without additional
connector pieces, creating a seamless border for your
landscaping.
4. Helpful Tips:
-
Use protective eyewear and gloves during installation.
-
Avoid pounding the anchoring spikes to the point where the tab
bends to prevent damage to the edging. -
Generously cover tabs with soil and groundcover for best
performance. -
Weed fabric can be used to minimize invasive weeds and grass
spread.
FAQ:
Q: Do I need additional anchoring spikes for certain
conditions?
A: Enough anchoring spikes are included for
typical installations. Additional spikes can be purchased in stores
or online if needed for specific conditions.
Q: How should I install weed fabric with the
edging?
A: Install the weed fabric according to its
directions, then place the landscape edging over the fabric and
drive spikes through the tabs and fabric for a secure
installation.
For further questions or assistance, contact us at
customersupport@dimexcorp.com
“`
NO-DIG FAUX STONE EDGING KIT
INST-VIG-FS-RV0
INSITNASLTLAALLTAIOTIONNININSSTTRRUUCCTTIIONSS
Always use proper safety precautions when cutting and spiking edging.
Protective eyewear and gloves are recommended during installation.
1 Clear the installation area of grass, loose soil, and debris. Slide edging pieces together so anchoring tabs overlap.
2 Hammer anchoring spikes (included) on each end of the installation and at connection points to secure edging.
3 Backfill with mulch, river rock, or other ground cover. Assure tabs are completely covered with a thick layer of bedding material.
CONNECTION SYSTEM
An overlapping post system stabilizes joints without additional connector
pieces to create seamless borders.
HELPFUL TIPS & INFORMATION
Installation:
Enough anchoring spikes are included to accommodate typical installations.
Certain conditions and landscape designs can require additional spikes, which
are available in stores and online.
Anchoring spikes should be driven only to the top of the edging tab. Pounding
the spike to the point the tab bends can damage the edging.
Generously cover tabs with soil and groundcover. Heavy bedding materials such
as rock and mulch tend to perform best.
Preparation:
Soil must be solid and level. Assure there is no debris between the edging tab
and the dirt below. Compact the cleared soil prior to installation to reduce
spike movement from shifting ground and frost heave.
Weed fabric can minimize the spread of invasive weeds and grass. Install
fabric according to product directions, then place the landscape edging over
the fabric and drive spikes through the tabs and fabric.
Questions/Comments? Contact us at customersupport@dimexcorp.com
INST-VIG-FS-RV0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>