FIT-EBike 500940 Rechargeable Battery Fib Fit 36 V Instruction Manual

FIT-EBike 500940 Rechargeable Battery Fib Fit 36 V

Specifications

• Model: Battery FIB FIT 36 V
• Manufacturer: Biketec GmbH
• Capacity: 36 V
• Networked Customised Intelligent

FAQ

Q: How do I charge the battery? A: Use the provided charger and plug it into a suitable power source following the charging guidelines.

Q: How long does it take to fully charge the battery? A: The charging time may vary but typically takes X hours for a full charge.

Q: Can I use the battery in rainy conditions? A: It is recommended to avoid exposing the battery to water or rain to prevent damage.

500940 | 500065

Biketec GmbH
Luzernstrasse 84 CH-4950 Huttwil
T +41 62 959 53 00
info@biketec.ch
fit-ebike.com

INSTRUCTION MANUAL
RECHARGEABLE BATTERY FIB FIT 36 V

PREFACE

Dear FIT customer,

• The FIT system offers many useful functions and options and we are pleased that you have decided to choose our system.
• Please read through the operating instructions carefully to ensure you use the system safely and get off to a quick start.
• We hope you enjoy discovering the FIT’s functions and have a fun ride every time you use it.
• Thank you for placing your trust in FIT.
• Your FIT Team

2 ABOUT THESE OPERATING INSTRUCTIONS

MANUFACTURER
Biketec GmbH
Luzernstrasse 84
CH-4950 Huttwil
fit-ebike.com/en-en/

LANGUAGE
The original operating instructions are written in German. A translation is invalid without the original operating instructions.

DECLARATION OF CONFORMITY
Biketec GmbH hereby declares that the products described in these operating instructions comply with EU directives.
The complete EU Declaration of Conformity is available online at: fit- ebike.com/en-en/service/declaration/

ON INFORMATION
Different markings are used in the operating instructions to make them easier to read.

WARNINGS IN THESE OPERATING INSTRUCTIONS
Warnings indicate hazardous situations and actions. You will find the following warnings in the operating instructions:

DANGER
May lead to serious or even fatal injuries if ignored. Medium-risk hazard.

CAUTION
May lead to minor or moderate injuries if ignored. Low-risk hazard.

NOTICE
May lead to material damage if ignored.

SAFETY INSTRUCTIONS

GENERAL INFORMATION

• Please read all safety instructions carefully. Failure to comply with the warnings or take residual risks into account may result in electric shock, fire and / or serious injury.
• Keep the operating instructions in a safe place and have them readily available to consult. Pass these instructions on if you provide your e-bike for someone else’s use.
• The generic names used in these operating instructions, such as motor, battery and operating element, all refer to original FIT e-bike components.

RECHARGEABLE BATTERY

• Remove the battery from the e-bike before you start working on the e-bike (e.g. inspection, repair, fitting, maintenance, work on the chain), transport it by car or plane or if you are not going to use it for extended period of time.

• There is a risk of injury if the e-bike system is activated unintentionally.

• Do not open up the battery as you risk causing a short circuit.

• Protect the battery from heat (e.g. including continuous direct sunlight), fire and being submerged in water. Do not store or operate the battery in close proximity to hot or flammable objects as this pose a risk of explosion.

• Keep the unused battery away from paper clips, coins, keys, nails, screws or other metal objects which could cause an electrical arc between the contacts. A short circuit between the battery contacts can cause fire or burns.

• Avoid any physical loads on the battery. They may inflict damage to the battery cells and cause flammable substances to leak out.

• Do not put the charger and battery down next to flammable materials. Only charge batteries when they are dry and in a fireproof place. There is a risk of fire due to heat accumulating during charging.

• The e-bike battery must not be left unattended while it is charging.

• If the battery is used incorrectly, liquid may leak from it. Avoid coming into contact with the liquid. Rinse off with water in the event of accidental contact. If the liquid gets into eyes, seek medical attention. Leaked liquid can cause skin irritation and burns.
  Vapours may be emitted if the battery is damaged or used improperly, ventilate with fresh air and consult a doctor if you suffer any pain or discomfort. The vapours can irritate the airways.

• Charge the battery with original FIT chargers only. Risk of fire cannot be ruled out if non-original FIT chargers are used.

• Use the battery in e-bikes with the FIT system only. This is the only way that the battery will be protected from dangerous overloading.

• Only use original FIT rechargeable batteries which the manufacturer has approved for your e-bike. Using other batteries can result in injuries and risk of fire. FIT accepts no liability and offers no warranty if other batteries are used.

• Keep the battery away from children.

• Our e-bike rechargeable batteries are lithium-ion batteries which are developed and manufactured to the latest technical standards. Lithium-ion batteries have a high energy content when charged. In the event of a defect, possibly not visible on the outside, lithium-ion batteries may catch fire in very rare instances and under unfavourable conditions.

PRODUCT AND TECHNICAL SPECIFICATIONS

SUPERCORE FIT 36 V
Fully integrated battery series for FLYER e-bikes. The batteries are easy to fit and remove without tools. The battery can be charged conveniently on the e-bike or when removed.

1. Battery level indicator
2. Charging socket

PROPER USE
All check lists and instructions for actions in these operating instructions met.
Only use original FIT rechargeable batteries which the manufacturer has approved for your e-bike.
The rechargeable batteries are designed to supply power to the e-bike motor only and must not be used for other purposes.

IMPROPER USE
Improper use refers to use which is not described under proper use or goes beyond proper use.

TECHNICAL DATA

RECHARGEABLE BATTERY FIB FIT 36 V

TRANSPORTATION AND STORAGE

TRANSPORTATION

CAUTION

• Remove battery before transportation.
• There is a risk of injury if the drive system is switched on unintentionally.

TRANSPORTING E-BIKES
Never use bicycle racks which use the e-bike’s handlebars or frame to hold the e-bike in an upside-down position. They can exert inadmissible forces on components during transportation. This can cause the supporting parts to break. The specialist dealer will advise you on how to select a suitable rack system properly and how to use it safely. Take the weight of the ready-to-use e-bike into account when transporting. Protect the electrical components and connections on the e-bike from the elements with suitable protective covers. Transport the battery in a dry, clean position where it is protected from direct sunlight.

TRANSPORTING THE BATTERY
Batteries are subject to hazardous goods regulations. Private individuals may transport undamaged batteries in road traffic. Commercial transport operators must comply with regulations on packaging, labelling and the transportation of hazardous goods. Open contacts must be covered and the battery securely packaged.

SHIPPING THE BATTERY
The battery is considered a hazardous good and only trained persons may pack and ship a battery. Contact your specialist dealer.

STORAGE

CAUTION

• Store e-bike, display, battery and charger in a clean, dry place where they are protected from sunlight.
• Do not store outdoors to ensure a long service life.
• The optimum storage temperature for your e-bike is between 10 °C and 20 °C.
• Temperatures under -10 °C or above +40 °C must generally be avoided.
• Store e-bike, display, battery and charger separately.

STORAGE MODE
The battery features a power-saving CHARGE TO STORAGE mode, which minimises discharge from the battery. Configure the CHARGE TO STORAGE mode in the battery settings.

BREAK IN OPERATION

NOTICE

• The battery discharges when not in use. This can cause irreparable damage to the battery.
• The battery must be recharged every 6 months.

The battery may become damaged if it is connected permanently to the charger. Never connect the battery to the
charger permanently. If you remove the e-bike from service for longer than four weeks, you need to prepare it for a
break in operation.

PREPARING FOR A BREAK IN OPERATION

• Remove battery from the e-bike.
• Charge battery to around 30–60% (storage mode).
• Before longer periods without use, it is recommendable to have your specialist dealer carry out an inspection and basic cleaning and apply preservative agent.

CARRYING OUT A BREAK IN OPERATION
Store the e-bike, battery and charger in a dry, clean environment. We recommend storing them in uninhabited rooms with smoke alarms. Dry locations with an ambient temperature between 10 °C and 20 °C are ideal. Check the battery level after 6 months. If only one battery level LED indicator lights up, recharge the battery to around 30–60%.

FITTING

RECHARGEABLE BATTERY FIB FIT 36 V

INSERTING THE BATTERY

1. First insert the battery into the lower holder on the e-bike.

2. Move it with the upper part towards the e-bike until the lock audibly engages in the upper bracket.

3. Make sure that the battery is firmly seated in the holder.

REMOVING THE BATTERY

1. Switch off the electrical system first.
2. Unlock the battery with the spanner and remove it from the holder. Always hold the battery firmly, it is heavy!

OPERATION

CHARGING THE BATTERY

CHARGING OPTIONS
The battery can be charged while inserted in the e-bike or after it has been removed. Look in the e-bike manufacturer’s original operating instructions to find where the e-bike charging socket is. Connect the charger to the e-bike charging socket (or directly to the battery) to charge. The charge indicator will automatically appear on the e-bike display screen if the battery is fitted into the e-bike. The display backlight will go out after a certain period of time. However, you can press the On-Off button to switch it back on again at any time.

DISPLAY AND SETTINGS

CHARGE LEVEL CHECK ON BATTERY

1. Checking button for the battery level
   Lights up the battery charge LEDs to check the remaining battery capacity or a possible fault with the battery itself.

2. Battery level LEDs
   Indicate how much e-bike battery capacity is left. An error code is displayed in the event of a fault. You will find the error table later in these instructions.
   Each lit battery level light represents around 20% of the battery capacity. If the battery is completely discharged, this is indicated by a rapidly flashing LED.

ERROR MESSAGES

BATTERY ERROR CODES

CLEANING AND SERVICING

BASIC CLEANING

CLEANING THE BATTERY

CAUTION
Risk of fire and explosion due to penetration by water

• The battery is only protected against simple spray water. Penetration by water can cause a short circuit.
• The battery may self-ignite and explode.
• Never clean the battery with a pressure washer, water jet or compressed air.
• Keep contacts dry and clean.
• Never immerse the battery in water.
• Never use cleaning agents.
• Remove the battery from the e-bike before cleaning.

NOTICE

• Never clean the battery with cleaning agents or with solvents, such as oil, thinners, alcohol or corrosion protection.
• Clean the battery electrical connections with a dry cloth or paintbrush only.
• Wipe off the decorative sides with a damp cloth.

TROUBLESHOOTING, FAULT CLEARANCE AND REPAIR

TROUBLESHOOTING AND FAULT CLEARANCE

DRIVE SYSTEM OR DISPLAY DOES NOT START UP
If the display and / or the drive system do not start up, proceed as follows:

1. Check if the battery is inserted correctly. If not, insert the battery correctly.
2. Start the drive system.
3. If the drive system does not start, remove the battery, check the charging status and charge if necessary.
4. Clean all contacts with a soft cloth.
5. Insert the battery.
6. Start the drive system.
7. If the drive system does not start, contact the specialist dealer.

NOTICE
If the battery terminal contacts are heavily soiled/oxidized. Take your e-bike to a specialist dealer for a detailed check.

ERRORS IN THE ASSISTANCE SYSTEM

REPAIR
Special expertise and tools are required for many repairs. That is why only a specialist dealer may perform repairs.

ORIGINAL PART
The individual e-bike parts have been carefully selected and matched to one other. Only original parts must be used for maintenance and repair. Observe the operating instructions for the new components.

REPLACING THE LIGHTS
Replace components with ones in the right power class.

ADJUSTING THE HEADLIGHT
The headlight must be positioned so that its beam hits the road surface 10 m in front of the e-bike.

RECYCLING AND DISPOSAL

DISPOSAL
Mechanical and electrical equipment, accessories and packaging should be recycled in an environmentally sound manner. Don’t throw them in the garbage!
Only for EU countries: According to European Directives 2012/19/EU, 2006/66/EC and their transposition into national law, defective or unusable waste electrical and electronic equipment, rechargeable batteries and batteries must be collected separately and recycled in an environmentally sound manner.

References

• FIT e-bike system integration | Biketec GmbH
• Declaration of conformity
• FIT e-bike system integration | Biketec GmbH
• Declaration of conformity

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>