Mr Pen Skateboard Griptape With Next Level Durability Installation Guide
- June 28, 2024
- Mr. Pen
Table of Contents
Mr Pen Skateboard Griptape With Next Level Durability
Installation Instruction
- Remove the protective film of the grip tape before you install it.
- Description: The image shows a person holding a strip of grip tape with one hand while peeling off the protective film with the other hand.
- Remove the protective film of double-sided adhesive on the back.
- Description: The image shows a person holding the grip tape and peeling off the protective film from the double-sided adhesive on the back of the tape.
- Start wrapping from the knob.
- Description: The image shows a person starting to wrap the grip tape around the knob of a racket handle.
- Continue to wrap while stretching the tape slightly to the racket handle.
- Description: The image shows a person wrapping the grip tape around the racket handle, ensuring the tape is slightly stretched for a snug fit.
- After finishing wrapping, trim the tape for an oblique angle.
- Description: The image shows a person using scissors to trim the end of the grip tape at an oblique angle after wrapping it around the racket handle.
- Fasten the top of the grip tape with the finishing tape attached.
- Description: The image shows a person fastening the top of the grip tape with a piece of finishing tape to secure it in place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>