OpenListen G200 True Wireless Gaming Headset User Manual
- June 27, 2024
- OpenListen
Table of Contents
OpenListen G200 True Wireless Gaming Headset
Specifications
- Support Type-C socket for fast charging
- Power input: DC/5V
- Playtime: 5 hours
- Charging interface: Type-C
- Charging time: about 1.5 hours
- Music time: about 5.5 hours (50% volume)
- Talk Time: about 2.5 hours (100% volume)
Product Usage Instructions
How to Connect
Pick up two earbuds from the charging case and make sure they are connected
via Bluetooth.
Charging Description
The touch controls on the earbuds allow you to control games or music by
following the specified touch patterns for each earbud. Additionally, the
calling control functions are also outlined for each earbud.
Factory Reset of the Headset
To perform a factory reset on the headset, hold both earbuds’ buttons for 5
seconds until the lights indicate the reset is complete.
Power On/Off
To power on, hold the specified button on each earbud for 5 seconds. To
power off, repeat the same process.
Information to User
It is important not to make changes or modifications to the headset that
are not approved by the manufacturer as it could voidthe user’s authority to
operate the equipment.
FAQ
-
Q: How long does it take to fully charge the headset?
A: The charging time for the headset is about 1.5 hours. -
Q: What is the playtime of the headset on a full charge?
A: The headset provides approximately 5 hours of playtime on a full charge.
Model：OpenListen G200
True Wireless Gaming Headset
How To Connect
Pick up two earbuds from charging case
Game/Music Control
Calling Control
Power On/Off
Information to User
- Note : This equipment has been tested and found to comply with the limits for a Class B digitadevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates.uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation.
- Important: Change or modifications not expressly approved by the manufacturer responsible forcompliance could void the user’s authority to operate the equipment.
Charging Description
Factory Reset Of The Headset
OpenListen G200 Specification
- Chipset :AC6976D4 , BT 5.3
- Earbuds battery : 40 mAh/3.7V
- Case battery : 300mAh/3.7V
- Charging interface: Type-C
- Music time: about 5.5hours(50% volume)
- Talk Time: about 2.5 hours(100% volume)
- Charging time: about 1.5 hours
- Power input:DC/5V
- Playtime :5hours
- Driver size: Ø13mm
- Bluetooth distance : 15M
- Waterproof : IPX4
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>