Schneider Electric C10F1TM030 Power Circuit Breaker Instruction Manual

: August 3, 2024
: Schneider Electric

Table of Contents

Schneider Electric C10F1TM030 Power Circuit Breaker
Product Usage Instructions
Required for Installation
Operation
Before Working on Equipment
Clearance Distances
Installation
Connection Accessories
Insulation Accessories /
Manufacturing Date
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Schneider Electric C10F1TM030 Power Circuit Breaker

Product Specifications

Model: ComPacTTM NSX100-160 1P AC/DC, ComPacTTM NSX250 1P AC
Current Rating: 250A
Trip Type: NSX 250N UU22ie80(0V/20)4V0a
Short-Circuit Breaking Capacity: 25kA

Product Usage Instructions

Maintenance

Regularly inspect the equipment for any signs of wear or damage.
Follow the maintenance schedule provided by the manufacturer.
Keep the product clean and free from dust or debris that could affect its performance.

Troubleshooting
If you encounter any issues with the product, refer to the troubleshooting section of the user manual or contact customer support for assistance.

Frequently Asked Questions (FAQ)
Q: Can this product be used in both AC and DC applications
A: Yes, the ComPacTTM NSX100-160 1P AC/DC and ComPacTTM NSX250 1P AC circuit breakers are suitable for both AC and DC applications.

1P Circuit Breakers

Retain instruction sheet for future use. Visit our website at www.se.com/docs to download the documents listed above (user U Gguides ) and other documents.

PLEASE NOTE

Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel.
The product has been designed for environment A (Class A, IEC 60947-1). Use of this product in environment B (Class B, IEC 60947-1) may cause unwanted electromagnetic disturbance in which case the user may be required to take adequate mitigation measures.
No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material.
All pertinent state, regional, and local safety regulations must be observed when installing and using this product.

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH

Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E, CSA Z462, NOM-029-STPS or local equivalent.
This equipment must only be installed and serviced by qualified electrical personnel. p Turn off all power supplying this equipment before working on or inside equipment.
Always use a properly rated voltage sensing device to confirm power is off.
Put back all devices, doors, and covers before turning on power to this equipment. p Beware of potential hazards, and carefully inspect the work area for tools and objects that may have been left inside the equipment.

Failure to follow these instructions will result in death or serious injury.

WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov

Required for Installation

Operation

Circuit Breaker Status

Close Circuit Breaker

CAUTION

HAZARD OF CLOSING ON ELECTRICAL FAULT
Do not close the circuit breaker without first inspecting and, if necessary, repairing the downstream electrical equipment. Failure to follow these instructions can result in injury or equipment damage.

Circuit breaker has tripped.
Reset the circuit breaker.
Inspect and repair downstream equipment, using proper safety precautions.
Close the circuit breaker.

Before Working on Equipment

Turn off all power supplying this equipment before working on or inside equipment.
Use the push-to-trip button to trip the device.
Use a properly rated voltage sensing device to confirm power is off.

Clearance Distances

HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
Install the device so minimum clearance distance to grounded metal is maintained. Failure to follow these instructions will result in death or serious injury.

Minimum Clearance

Painted sheet metal

No accessories
Terminal shield

Compression Lug Safety Clearance

Live Part Minimun Clearance Distances Required

Installation

Cut-out for Rear Connection

Door Cut-out /

Wiring

HAZARD OF FIRE

Use only specified wiring cross-section with the equipment and comply with the specified wiring requirements.
Tighten the connections to the specified torque values.
Failure to follow these instructions can result in death, serious injury, or equipment damage.

Compression Lugs Connections

Compression Busbar Connections

Connection Accessories

HAZARD OF FIRE

Use only specified wiring cross-section with the equipment and comply with the specified wiring requirements.
Tighten the connections to the specified torque values.
Failure to follow these instructions can result in death, serious injury, or equipment damage.

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
If the network voltage is equal to 240 Va or 250 Vc, it is mandatory to install a short terminal shield LV432320. Failure to follow these instructions will result in death or serious injury.

CAUTION
HAZARD OF OVERHEATING
Do not use steel connectors over 160 A. Failure to follow these instructions can result in injury or equipment damage.

Voltage Take-off

Use the voltage take-off for aluminum connectors 1 cable.

Terminal Extensions

HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
If the network voltage is equal to 240 Va or 250 Vc, it is mandatory to install a short terminal shield LV432320. Failure to follow these instructions will result in death or serious injury.

Insulation Accessories /

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
If the network voltage is equal to 240 Va or 250 Vc, it is mandatory to install an interphase barrier between two circuit breakers mounted side by side. Failure to follow these instructions will result in death or serious injury.