WATTSHOP MK2 Extension Mono Stack User Guide
- June 27, 2024
- WattShop
Table of Contents
WATTSHOP MK2 Extension Mono Stack
EXTENSION INFORMATION
BUILD OPTION
For mono-riser stack systems, there is only one build option available. It is
critical to ascertain the correct size bracket to meet your requirements.
BRACKET
Core components
Extensions
Handgrips
Armrests
Baseball-specific adjustable riser fixed angled riser
Crossbrace computer mount
Bracket
HANDGRIP SELECTION
STANDARD POLE+ STANDARD POLE (LONG)
The standard pole handgrip mirrors the traditional pole end shifter. It is
compatible with the following shifters:
- SHIMANO R9160
- SHIMANO SW671
- SRAM cues
The handgrips will be available in a standard length for athletes competing under UCI regulations who want to maximise their extension and le, and a longer length for athletes competing under non-UCI-regulated events.
Install method
The bracket attaches to your existing mono stack riser. In turn, the baseball-
specific riser or fixed-angled riser will attach to the bracket.
ERGO
ThErgogo handgrip is available in different versions. They are named as
follows:
- SHIMANO R9150
- SRAM WIRELESS BLIPS
- SRAM WIRED BLIPS
- TRACK
All versions except the track handgrip will be suppliewithth an inner and outer component. Youshifterer but will attach to the inner componentry while the outer component slides over the top. This increases the shifter contact freshener sh lifting.
UCI HAND HEIGHT COMPLIANCE
When competing under UCI regulations you will need to ensure you are
compliant with the UCI regulations applicable to your height category.
- CATEGORY l – riders are allowed 700mm mid-point ofthe armrest to the extension tip.
- CATEGORY 2 – riders are allowed 720mm mid-point of the armrest to the extension tip.
- CATEGORY 3 – riders are allowed a 740mm mid-point of the armrest to the extension tip.
- NON-CATEGORY – riders are allowed 700mm mid-point of the armrest to the extension tip.
Please note: mid-point to extension tip measurements are measured vertically All accessories are included in these dimensions.
WattShop Product Compatibility
Compatible with the complete range of WattShop componentry. Due to the control
led later in the centre of this mounting option, our cross-brace BTA mount and
computer mount are the optimal choices for this build.
- COMPLIANT
- CONDITIONS APPLY
- NON-COMPLIANT
UCI NON-CATEGORY
Riser Anale| Handgrip
Ergo| Ergo (Track)| Standard Pole| Standard Pole (Long)
10|
15| 100| 100| 98| 119
20| 120| 120| 120| 143
25| 139
158
| 139
158
| 142
162
| 166
188
30
UCI CATEGORY 1
Riser Anqle| Handgrip
Ergo| Ergo (Track)| Standard Pole| Standard Pole (Long)
10| 79
100
120
| 79
100
120
| 74
98
120
| 94
119
143
15
20
25| 139| 139| 142| 166
30| 158| 158| 162| 188
UCI CATEGORY 2
Riser Anale| Ergo| ****
Ergo (Track)
| Handgrip| ****
Standard Pole
| ****
Standard Pole (Long)
10| | | 74|
15| 100| 100| 98|
20| 120| 120| 120| 143
25| 139| 139| 142| 166
30| 158| 158| 162| 188
UCI CATEGORY 3
Riser Angle| Handgrip
Ergo| Ergo (Track) **Standard Pole| Standard Pole (Long)
10| | 79 ****74| 94
15**
20
25
30
| 100| 100| 98
120
142
162
| 119
143
166
188
120
139
158
| 120
139
158
All dimensions are in millimetres (mm) unless otherwise stated.
All standard pole handgrips can be trimmed to fit your desired category.
Please note the standard pole dimensions above exclude the shifter.
BRACKET BUILD
REACH
All reach dimensions are measured from the rear riser bolt hold horizontally
to the extension tip.
Adjustable Riser
| Reach| h Window – XS Brac| ket|
Fixed Riser
| Reach| Window – XS Brac| ket
---|---|---|---|---|---|---|---
SP| SP (Long)| Ergo| SP| SP (Long)| Ergo
Min| Max| Min| Max| Min| Max| Min| Max| Min|
Max| Min| Max
10| 249| 302| 269| 323| 254| 307| 10| 266| 286| 286| 306| 271| 291
lS| 240| 293| 2S8| 312| 243| 296| 15| 256| 276| 275| 295| 260| 280
20| 231| 281| 247| 298| 232| 283| 20| 246| 266| 262| 282| 248| 268
25| 219| 267| 233| 281| 219| 267| 25| 233| 253| 247| 267| 233| 253
30| 206| 251| 218| 263| 204| 249| 30| 218| 238| 231| 251| 217| 237
Adjustable Riser
| | Reach – M B racket| |
Fixed Riser
| | Reach – M Bracket|
---|---|---|---|---|---|---|---
SP| SP (Long)| Ergo| SP| SP (Long)| Ergo
Min| Max| Min| Max| Min| Max| M i
n| Max| Min| Max| Min| Max
10| 289| 342| 309| 363| 294| 347| 10|
306| 326| 326| 346| 311| 331
15| 280| 333| 298| 352| 283| 336| 15|
296| 316| 315| 335| 300| 320
20| 271| 321| 28 7| 338| 272| 323|
20| 286| 306| 302| 322| 288| 308
25| 259| 307| 273| 321| 259| 307| 25|
273| 293| 287| 307| 273| 293
30| 246| 291| 2S8| 303| 244| 289| 30|
2S8| 2 7 8| 271| 291| 25 7| 2
n
Adjustable Riser| Reach| h Window – XL Brac|
ket| Reach Window – XL Bracket
---|---|---|---|---
SP| SP (Long)| Ergo| Fixed Riser| SP| SP (long)|
Ergo
M i n| Max| Min| Max| Min| Max|
Min| Max| Min| Max| Min| Max
10| 329| 382| 349| 4 0 3| 334| 387|
10| 346| 366| 366| 386| 351| 371
1 5| 320| 373| 338| 392| 323| 376|
15| 336| 356| 355| 375| 340| 360
2 0| 311| 361| 327| 378| 312| 363|
20| 326| 346| 342| 362| 328| 348
25| 299| 347| 313| 361| 299| 347| 25|
313| 333| 327| 347| 313| 333
3 0| 286| 331| 298| 343| 284| 329|
3 0| 298| 318| 311| 331| 297| 317
WIDTH
All width dimensions are measured in red from outside to outside at the rear
of the eacarmrestst.
A dj us ta b l e
o r F i x ed
| Ar m r est W idth
---|---
R iser| M in| M ax
10| 1 7 0| 2 40
1 5| 1 70| 2 4 0
2 0| 170| 2 40
25| 1 70| 2 4 0
30| 1 7 0| 240
For armrests widths narrower than 200mm, the inner edge will require trimming. Al l dimensions are in millimetres (mm) unless otherwise stated.
RISER SELECTION
ADJUSTABLE RISER
The adjustable riser is available in two different options. For the Bracket,
bu ild you wi ll rraceI have the baseball-specific riser option.
BASEBALL SPECIFIC ADJUSTABLE RISER
These risers have threaded bosses on the underside which provides easy
installation and seamless integration with WattShop componentry.
FIXED ANGLED RISER
Designed to provide you with a clean and seamless integration between the user
and extension, the thieved handled riser is available in five different
angles, each which comes with 2 degrees of toe-in This may be the preferred
option for riders who know their optimal extensioanglele or want to maximise
their positiowithinin the UCI regulations.
- 10 DEGREES
- 15 DEGREES
- 20 DEGREES
- 25 DEGREES
- 30 DEGREES
ARMREST+ COMPUTER MOUNT SELECTION
ARMRESTS
Available in two different styles. Both are slotted to provide width
adjustment.
DUAL-SIDED
Each armrest has high-sided inside and outside supporting faces, giving the
armrest a “U” shape We recommend this style of armrest for widths 220mm or
wider this ensures youwilll benefit from the support of the inside edge.
SINGLE SIDED
Each armrest has a high-sided outside supporting face We recommend this for
armrests widths less than 220mm. At less than 220mm your forearms are likely
touching so the benefit of the inside supporting face is reduced.
COMPUTER MOUNAvailable le in two different options; Garmin and with only one extension interface option.
CROSSBRACE MOUNT
Comes supplied as standard the Bracket computer mount attaches to both
extensions to centralise and provide additional strength. GoPro-style
accessories are available to allow GoPro and front-light attachments.
BRACKET SELECTION
BRACKETS
The mono brackets are available in different sizes, and each bracket offers
20mm of reach adjustment Your budget will come with the bracket size of your
choice. Across the three sizes anywhere used in conjunctiowithth t, the
adjustable rise he systprovidesdes a large-reawindowdow
- EXTRA SHORT (XS)
- MEDIUM (M)
- EXTRA LONG (XL)
When used in combination with the fixed angled risers you find yourself
between reach sizes as the reacwindowow is reduced. This applies to you,
please
contact us and we can offer SHORT (S) and LONG (L) brackets.
Please note each bracket is specific to the mounting it is named after I.E Sh
iv Tri brackets are only compatib with Sh iv Tri bikes.
- @watt_Shop
- @wattShop
- /shopforwatts
- info@shopforwatts.co.uk
- www.shopforwatts.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>