nVent HOFFMAN P2BP1125 Plinth Bases 1200X500MM Black Steel Owner’s Manual
- June 27, 2024
- nVent HOFFMAN
Table of Contents
nVent HOFFMAN P2BP1125 Plinth Bases 1200X500MM Black Steel
Product Information
Specifications:
- Article Number: 31074
- Height: 3.94 in
- Width: 47.21 in
- Depth: 18.27 in
- Material: Mild Steel
- Finish: Powder Coated
- Color: Jet Black
- Color Code: RAL 9005
- Thickness: 16 ga
- Type: 100mm
- Weight: 17 lb
Product Usage Instructions
Installation:
The ProLine G2 Plinth Bases are designed to be installed under an enclosure to create space for cables to enter from below. Follow these steps for installation:
- Ensure the area where the plinth base will be installed is clean and free of obstructions.
- Position the plinth base under the enclosure ensuring it aligns properly with the cable entry points.
- Secure the plinth base in place using appropriate mounting hardware.
- Verify that the plinth base is securely installed before routing any cables through it.
Maintenance :
To maintain the ProLine G2 Plinth Bases, regularly check for any signs of
damage or corrosion. Clean the bases as needed using a mild detergent and a
soft cloth. Avoid using abrasive cleaners that may damage the powder-coated
finish.
Safety Precautions :
Always follow safety guidelines when working with the ProLine G2 Plinth Bases.
Ensure proper grounding and insulation when routing cables through the bases
to prevent electrical hazards.
FAQ
-
Q: Can the ProLine G2 Plinth Bases support heavy enclosures?
A: The ProLine G2 Plinth Bases are designed to support standard enclosures within the specified weight limits. For heavier enclosures, additional support may be required. -
Q: Is it necessary to use specific mounting hardware for installation?
A: It is recommended to use the appropriate mounting hardware provided by nVent to ensure secure installation and optimal performance of the plinth bases.
PROLINE G2 100-MM PLINTH BASES, FITS 1200X500MM, BLACK, STEEL
CATALOG NUMBER
P2BP1125
ProLine G2 Plinth Bases install under an enclosure to provide space for cables to enter from below.
FEATURES
- Four access panels for cable management options at the base of the enclosure
- Sturdy cast aluminum corner supports for superior performance under load
- Corner blocks can be installed onto the base of the frame independent of the cover plates, enabling the cover plates to be attached after integration and just prior to shipment
- Stackable up to 400mm in height using Plinth Base Stacking Kit (not included) 100 mm or 200 mm options
- To maintain a NEMA Type 12 environmental rating, gland plate must also be used in the base of the enclosure
- Installation hardware included
PRODUCT ATTRIBUTES
- Article Number: 31074
- Height: 3.94 in
- Width: 47.21 in
- Depth: 18.27 in
- Material: Mild Steel
- Finish: Powder Coated
- Color: Jet Black
- Color Code: RAL 9005
- Thickness: 16 ga
- Type: 100mm
- Weight: 17 lb
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent