nVent HOFFMAN AL3ABLK Latch Kit 1 Door Type 12 Enclosure Non Lock CW Owner’s Manual
- June 27, 2024
- nVent HOFFMAN
Table of Contents
nVent HOFFMAN AL3ABLK Latch Kit 1 Door Type 12 Enclosure Non-Lock CW
Product Specifications:
- Article Number: 35917
- Material: Mild Steel
- Finish: Powder Coated
- Color: Black
- Handle Type: Non-Locking
- Opens: Clockwise
- Weight: 0.9 lb
CATALOG NUMBER: AL3ABLK
Designed for field installation on most standard one-door Type 12 enclosures. These latch kits will not fit HOFFMAN disconnect, Concept or ProLine enclosures. The latch rods can be adjusted to maintain the proper gasket compression by relocating the pins in the rod guides. When the pin is removed, the latch rod can also be removed. All openings through the door are gasketed to assure a complete seal. Ends of latch rods have rollers for easier door closing.
FEATURES
Each kit includes a handle, latch, latch rods, adjustable rod guides and all
hardware These kits are available with a key locking handle, a non-locking
handle or a padlocking handle Two keys are furnished with keylocking handles
Product Usage Instructions:
Installation:
- Ensure the enclosure is a standard one-door Type 12 enclosure.
- Adjust the latch rods to maintain proper gasket compression by relocating the pins in the rod guides.
- If needed, remove the pins to detach the latch rod for adjustments.
- All openings through the door should be gasketed for a complete seal.
- The ends of latch rods have rollers for smoother door closing.
PRODUCT ATTRIBUTES
- Article Number: 35917
- Material: Mild Steel
- Finish: Powder Coated
- Color: black
- Handle Type: Non-Locking
- Opens: Clockwise
- Weight: 0.9 lb
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent customer service
representative. Improper installation, misuse, misapplication or other failure
to completely follow nVent’s instructions and warnings may cause product
malfunction, property damage, serious bodily injury and death and/or void your
warranty.
Kit Components:
Each kit includes a handle, latch, latch rods, adjustable rod guides, and all
necessary hardware for installation.
Handle Options:
The latch kits are available with three handle options: key locking handle,
non-locking handle, or padlocking handle. Two keys are provided with key-
locking handles.
Our powerful portfolio of brands:
nVent.com
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
TRACER
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners. nVent reserves the right to change specifications
without notice.
Frequently Asked Questions (FAQ):
Q: Can this latch kit be used on HOFFMAN disconnect enclosures?
A: No, these latch kits are designed for standard one-door Type 12 enclosures
and will not fit HOFFMAN disconnect enclosures.
Q: How can I adjust the latch rods for proper gasket compression?
A: You can adjust the latch rods by relocating the pins in the rod guides. If
necessary, you can remove the pins to detach the latch rod for adjustments.
Q: What should I do if I encounter difficulty during installation?
A: Refer to nVent’s product instruction sheets available at
www.nvent.com or contact your nVent customer service
representative for assistance. Improper installation may cause product
malfunction or void your warranty.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent