EDK FARM EDK-SM Series WIFI EDK LED Grow Light Instruction Manual

EDK FARM EDK-SM Series WIFI EDK LED Grow Light

Product Information

Specifications

• Model: EDK-SM-18W, EDK-SM-36W
• Power: 18W, 36W
• Input: 100-240Vac, 50/60Hz
• Overall Size: 6576750mm, 10556750mm

Product Usage Instructions

1. Ensure the input voltage is within the range of 100-240Vac and the frequency is 50/60Hz.
2. Place the product in a well-ventilated area with sufficient space around it to prevent overheating.
3. Connect the product to a power outlet that is on a circuit different from other heavy electronic equipment.
4. For installation and setup, refer to the user manual provided with the product.
5. Do not obstruct the radiator of the product and maintain a minimum distance of 20cm between the radiator and your body.

FCC Warning:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

FAQ

Q: Can I use the product in a humid environment?

A: It is recommended to avoid using the product in humid environments to prevent damage.

Q: How do I clean the product?

A: To clean the product, use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.

Scan the QR code to download the app and follow the steps to connect.

• Requires 2.4g Wifi to connect to the light

  1. Download ‘Smart Life – Smart Living’ app (scan QR code or search in your App store)
  2. Your phone must be connected to 2.4g Wifi
  3. Turn Bluetooth ON
  4. Sign up/register with your email address on the app
  5. Click ‘Add Device’
  6. On left Select ‘Lighting’
  7. Click the first option ‘Light Source (WFI)’
  8. Click the button ‘Confirm the indicator is blinking or breathing’
  9. Select ‘Blinking or breathing rapidly’
  10. Enter your 2.4g Wifi Network name and password and click ‘Next’
  11. The Connecting Device screen will appear with a 2 minute timer
  12. Switch on the Kitchen Garden light manually with the cord switch, the light will be ‘breathing’
  13. Device added to the app!
  14. It will say Added successfully – click on the pencil/edit button to edit the name e.g. Kitchen Garden

If you do not connect the first time, manually reset the light by switching it off, then turn on and off three times using the cord switch (leave it off now).
Click Retry and repeat steps 6 -12.OR Close the window using the X and repeat steps 5-12.
Once added, click on the name of the device, the screen pops up to adjust Brightness and Scene. You can also click on the clock icon to set an On/Off schedule.

Product Model

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>