SHARPER IMAGE SI-AU-BS-101-BK Wireless Speaker User Manual

SHARPER IMAGE SI-AU-BS-101-BK Wireless Speaker

Notice: Please read user manual carefully and keep it for your records.

Package includes

• 1 Speaker
• 1 Charging cable
• 1 User Manual

Safety instructions

• Do not let small children play with this product.
• Do not expose the speaker to liquid, moisture or humidity to avoid the product’s internal circuit being affected
• Do not use abrasive cleaning solvents to clean the speaker.
• Store the speaker out of direct sunlight and extreme temperatures (above 45°C/113°F or below – 10°C/14°F), as this may shorten the battery life, affect the operation or degrade the performance of your speaker
• Do not dispose of the speaker in a fire to sharp objects as this will cause scratches and damage.
• Do not drop the speaker, This may cause damage to the internal circuitry.
• If the speaker is left for a long period without use, charge once per month to avoid the overconsumption of the battery.
• This appliance is for indoor use only, Please do not use or store the unit in high temperature or hazardous locations, Please do not submerge the unit into the water, as this will ruin the speaker.
• The unit comes with a rechargeable battery, so please do not throw or put it in a fire to avoid an explosion.
• The warranty for this product is invalidated if the products have been damaged, repaired or modified in any way.

Control Panel: mode press 2-3s to power on/off and enter “Bluetooth

• Search the pairing name: “SI-BS-101” and connect it to the device.
• short press : Play/Pause in the music mode, Answer/ Hang up in the phone mode.
• Short press : Lower volume; Long press: Previous track.
• Short press: Raise volume; Long press: Next track.
• Short press : Enter Bluetooth mode; Long press:
• Disconnect the phone; Double-click: Enter FM mode.

Note:

• (A) The Bluetooth speaker will only sync with one device at any time, the connection cannot be deleted when matching. It can only be deleted in disconnected mode.
• (B) A Bluetooth connection list cannot have two devices with the same name. This will cause one of the two devices to fail to connect via Bluetooth.
• (C) If Bluetooth pairing fails, delete other Bluetooth devices in the connection list, restart the speaker and try again.
• (D) The disconnection of Bluetooth is not immediate and will take a new second delay to fully disconnect from the smartphone.

Troubleshooting

1. No power: Recharge your speaker using the included USB Type C charging cable. Try using a different cable.
2. Music is not playing over Bluetooth: Make sure your Bluetooth device has an A2DP profile. Check if both devices are paired and connected over Bluetooth. Restart the speaker to reconnect our Bluetooth device.
3. Bluetooth device will not reconnect with the speaker: Navigate to your Bluetooth settings menu on your Bluetooth device, tap “SI-BS-101” and select “Forget”. Now follow the steps to pair your device again.

LED LIGHT

• Power on/off:
• Power on: Blue light
• Power off : The red light goes on for 3 seconds and then goes off
• Bluetooth mode :
• Bluetooth search: Blue light flashing
• Bluetooth pairing success: blue light on
• Disconnect Bluetooth: the blue light flashes
• Low battery alarm: Red light flashing
• Charging indicator:

The charging indicator is steady red and goes off when it is fully charged.

Frequently Asked Questions

Unsuccessful Pairing for Connection

WARRANTY

WARRANTY 12 MONTHS
Please visit our website Bytechintl.com/warranty

Contact Info:

• 2585 West 13th Street
• Brooklyn, NY 11223
• www.bytechintl.com
• 718-449-3700

FCC

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.
   CAUTION: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

SHARPER IMAGE®
©2024 BYTECH NY INC. Brooklyn, NY 11223.
The Sharper Image trademark. names and logos are owned by ThreeSixty Group Manufactured, marketed and distributed by Bytech NY INC, under license Bluetooth® is a registered trademark of Bluetooth SIG Inc.
All Trademarks and Registered Trademarks are the property of their respective owners

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>