Shenzhen Chuangli CRT-302 Touch Kiosk User Manual

Shenzhen Chuangli CRT-302 Touch Kiosk

Specifications:

• Model No. : CRT-302
• Size : 27”
• Operating System : Android, Windows
• Processor : Intel Core i5 8th Gen
• Camera : Optional
• Passport Scanner : Included for identification and scanning passports
• Printer : With automatic cutter, supports 80mm OD paper roll
• Smart Payout : Accepts and stacks in 3s, holds up to 1000 banknotes
• Scanner : Supports 1D, 2D with 0-100mm decode ranges
• Card Dispenser : Optional
• Touch Screen : Multi-touch, supports smooth handwriting, 4G, and WiFi connectivity
• Display Size : 27”
• Display Scale : 16:9
• Display Type : Capacitive touch LED
• Touch Response Time : 5ms
• Monitor Touch Object : Finger, Pen, any conductive object
• CPU : Intel Core i5 8th Gen
• RAM : DDR4 16GB
• Interfaces : USB, RS232, RJ45
• Frequency H/V : 30-80KHz / 60-75Hz

Product Usage Instructions

Setup:

1. Connect the power cord and WIFI antenna to the device.
2. Power on the system and follow the on-screen instructions for initial setup.

Using the Touch Screen:

The touch screen supports multi-touch gestures and smooth\ handwriting. You can interact with the device using your fingers, a pen, or any other conductive object.

Printing:

To print documents or receipts, load the 80mm OD paper roll into the printer with automatic cutter. Follow the printing instructions provided in the system.

Scanning:

The device supports scanning of both 1D and 2D barcodes within the range of 0-100mm. Place the barcode within the designated scanning area for accurate results.

Cash Handling:

The smart payout feature allows the device to accept and stack banknotes in stacks of 3, with a capacity of up to 1000 banknotes. Follow the on-screen prompts for cash transactions.

FAQ

• Q: Is the card dispenser included with the product?
  • A: The card dispenser is optional and may need to be purchased separately based on your requirements.
• Q: Can I use the device without an internet connection?
  • A: While the device supports WiFi connectivity, certain functions may require an internet connection. However, basic operations can be performed without being connected to the internet.
• Q: How do I clean the touchscreen display?
  • A: Use a soft, lint-free cloth slightly dampened with water to gently clean the touch screen display. Avoid using harsh chemicals or abrasive materials to prevent damage.

Product Information

• Receipt printer with automatic cut and automatic detect paper remove
• Cash acceptor can hold up to mixed denomination 1200 notes
• Automatic detect bar code and QR code
• Colour-change breathing light in bottom, easy to catch Passers-by’s sight
• Locked cabinet to ensure internal safety while being easily maintained
• A passport scanner can scan and identify the passport with picture record 1080p camera can be built-in or external
• The card dispenser can hold about 150 cards with a thickness of 0.71- 1.0mm, and supports reading and writing IC cards and RF cards.

SPECIFICATIONS

Monitor

• Size: 27″
• Display scale: 16:9
• Type: Capacitive touch LED
• Touch response time: 5ms
• Touch Object: Finger, Pen, any conductive object

Display

• Resolution: 1920 x 1080
• Brightness: 300 cd/m2
• Contrast ratio: 3000:1
• Display area: 597.6mm*336.1mm
• Light transmit ratio : 85%
• View angle: 178°/ 178°

Computer

• CPU: Intel Core 15 8gen
• System: Windows
• RAM: DDR 4 16G
• ROM: 500GB SSD
• Interface: USB4,RS2322,RJ45*1
• Frequency (H/V) : 30~80KHz / 60~75Hz

More Info

• Power Type: external power adapter
• Input voltage: 100-240 V AC, 50-60 Hz
• Working environment:
• Operating temperature: -10~50°C
• Storage temperature: -20~ 60°C
• Working humidity: 10% ~ 90%
• Storage humidity: 10% ~ 90%
• Protection level: IP56
• LED Backlight Life(Min): 30,000 hours

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>