PLT Solutions PLT-90476 6 Selectable LED Downlight with Nightlight Instruction Manual

: September 9, 2024
: PLT SOLUTIONS

Table of Contents

PLT-90476 6 Selectable LED Downlight with Nightlight
Product Specifications:
Product Usage Instructions:
Installation Instructions:
Usage Instructions:
- Frequently Asked Questions (FAQ):
Q: Can I dim the LED downlight?
Q: What is the power consumption of this downlight?
Q: How do I change the color temperature of the downlight?

PLT-90476 6 Selectable LED Downlight with Nightlight

“`html

Product Specifications:

Product Name: 6 Color Selectable LED Downlight with
Nightlight
Model Number: 082124
Input Voltage: 120V
Power Consumption: 10W
Color Temperature: Selectable (CCT)
Lumen Output: 800 lumens
Dimmable: Yes
Dimensions: Diameter 6 inches, Height 1.5 inches

Product Usage Instructions:

Installation Instructions:

Open the package and take out the included accessories.
Install the multifunctional bracket on the back of the disk
light.
Attach the spring tabs and screws to the disk light.
Screw the E26 adapter into the socket of the recessed
housing.
Select the desired color temperature (CCT) using the switch on
top of the disk light.
Connect the fast connector between the recessed housing and the
disk light.
Insert the disk light into the housing by pressing the spring
tabs and sliding them into place.
Ensure the disk light is firmly attached and powered on to
verify successful installation.

Usage Instructions:

To operate the downlight and nightlight:

To turn on the downlight only, flip the light switch on.
To turn on the nightlight only, turn on the downlight first,
then flip the light switch off and back on again.
To reset from nightlight mode to downlight mode, flip the light
switch off and hold for 5 seconds.

Frequently Asked Questions (FAQ):

Q: Can I dim the LED downlight?

A: Yes, the LED downlight is dimmable.

Q: What is the power consumption of this downlight?

A: The power consumption of this downlight is 10 watts.

Q: How do I change the color temperature of the downlight?

A: You can change the color temperature by sliding the switch on
top of the disk light to your desired setting.

“`

r, 6″ COLOR SELECTALBE LED DOWNLIGHT W/ NIGHTLIGHT WARNING, CAUTION, SAFETY AND INSTALLATION INSTRUCTIONS
WARNING
· Installation, service, and maintenance of luminaries should be performed by a qualified licensed electrician.
CAUTION
· Do not make or alter any holes in the wiring enclosure or electrical components during installation. · This device is not intended for use with emergency exits. · Minimum 90°C supply conductors.

Installation Instructions
Recessed Mount to Existing Housing
Step 1. Open the package and take out the following accessories:

Step 2. Take out the disk light and install the multifunctional bracket on the back of the light.

Spring Tabs ‘2

Multi-functional bracket ·1

E26 Adapter ‘1 M4x6 Screw ‘2

Wire nut’3

Step 3. Take out the spring tabs and screws and install them on the disk light.

Step 4. Loosen the screws on the bracket to adjust the spring tabs so they can fit 5 or 6-inch cans. If the can is 4-inches, the spring tabs need to be rotated 180°. Once the spring tabs are in the right position, tighten the screws on the bracket.

972-535-0926 I pltsolutions.com Iver 082124

r, 6″ COLOR SELECTALBE LED DOWNLIGHT W/ NIGHTLIGHT WARNING, CAUTION, SAFETY AND INSTALLATION INSTRUCTIONS
Step 5. Take out the E26 adapter and screw it into the socket of the recessed housing (not provided).
Step 6. Select your desired CCT by sliding the switch on the top of the disk light to the desired setting. Then connect the fast connector between the recessed housing and the disk light.

Step 7. Press the spring tabs of the disk light in and slide them into the can so they to the attach to the brackets on the housing.
Step 8. Push the disk light into the recessed housing, making sure it’s firmly attached. Then turn on the power to verify your successful installation. For DOWNLIGHT ON only: Flip the light switch ON. For Night Light ON only: Turn ON the downlight. Flip the light switch OFF, then back ON again. Reset to Downlight ON from Night Light: Flip the light switch OFF and hold for 5 seconds to reset to Downli ht ON.
2

Selectable CCT Switch
t t
t t
972-535-0926 I pltsolutions.com Iver 082124