Alouatta JD01 Smart Connected Aromatherapy Diffuser User Manual

Smart Connected Aromatherapy

Diffuser Manual

1、Product Parameters

Thank you for purchasing and using this product!
In order to bring you a better experience, please read this manual carefully before using the product, and please keep it in a safe place for future reference.

x1, no trace hanging sticker x1

Due to product updates and upgrades, the physical product and parameters may vary slightly, please refer to the physical product.

2、Key functions and operating instructions

Power on/off| 1, long press on/off, (on screen display: ON, off display: OF) the first boot into the 1-speed mode (boot state to achieve cell phone remote control), the second boot default last use state;
2, short press the button, cycle switch spray gear;
When switching gears: display the gear first, display the power for 2 seconds after an interval of 1 second (e.g., 50%), and then display the temperature for 2 seconds after an interval of 1 second (e.g., 25℃).
---|---
1st gear| Spraying for 3 seconds; spraying every 5 minutes; when switching gears, the digital tube displays 1 (bright for 5 seconds), and the spray icon and aroma icon are bright for 5 seconds;
Work instructions: 30 seconds flashing aroma icon and spray icon, indicating that the current work in the first gear
2nd gear| Spray 3 seconds: spray every 15 minutes: digital tube display 2 (light 5 seconds) when switching gears, spray icon and fragrance icon light 5 seconds;
Work instructions: 30 seconds blinking fragrance icon and spray icon, that is currently working in the 2-speed
3rd gear| Spray for 3 seconds: Spray every 30 minutes: When switching gears, the digital tube displays 3 (light for 5 seconds), and the spray icon and fragrance icon light for 5 seconds;
Work instructions: 30 seconds blinking fragrance icon and spray icon, that is currently working in 3 gears
4th gear| Continuous spraying, digital tube display 4 when switching gears (lit for 5 seconds)
Work instructions: spray icon and constant spray icon is always lit, indicating that the current work in 4 gears
indicator light| 1、charging: insert the charger, rechargeable battery icon (blinking) (indicating that the charger has been connected) the whole process of charging, digital tube real-time display of the percentage of power.
2、When fully charged: the charging icon is always on, and the power display is 100%.
3、Low battery: the digital tube continuously flashes 00, reminding the user that low battery needs to be charged.
timing operation| APP can set the timer work, after the timer is effective, if you operate the local button, it will cancel all the timer settings.

3、Essential oil bottle installation and disassembly methods

① Remove the perfume bottle, unscrew the cap and remove the protective film from the bottle seal.
② Remove the cotton swab and insert the swab vertically into the bottle, making sure the swab is inserted to the bottom of the bottle.

Insertion:
One hand holding the machine, the other hand will be the mouth of the perfume bottle in the back of the machine on the back of the equipment to install the interface, press the bottom of the bottle, hear the “pop” sound, the bottle and the body of the machine can be tightly affixed.

Notes:

1. the machine is timed in minutes after the start of the automatic spray unit, timing time may be slightly off.
2. the process of installing the essential oil bottle and the bottle, do not tilt the aromatherapy machine, inverted, side put. Otherwise the essential oil leakage will cause damage to the machine!
3. the essential oil is not edible, please keep away from children and pets to avoid accidental ingestion of accidents.
4. essential oils to avoid contact with the skin and eyes, such as accidentally into the eyes, please rinse with water or seek medical attention in a timely manner.
5. the essential oil to avoid dripping into the oily paint / leather / fabric surface, so as not to cause corrosion damage. If accidentally spilled, please clean up immediately.
6. strictly prohibit the use of non-company formulations of essential oils, so as not to cause clogging of the spray port, damage to the function of the product.
7. the use of the process, encountered any problems please consult customer service first, there are professional after-sales staff for you to deal with! It is strictly prohibited to privately dismantle the maintenance or cleaning.
8. please do not poke the atomization mouth with sharp objects, so as not to damage the atomization piece, resulting in the inability to spray.

Special note: [nano-ceramic atomizer] Inside the spray port is the atomizer, do not use something to poke, scratch or poke (man-made poke/scratch is not guaranteed after-sales)

4、Mijia APP control

This product has been connected to Mijia and can be controlled by Mijia APP. “works with miiia” is for software verification only. Xiaomi is not responsible for the manufacturing, standardization, quality control, etc. of the product or the company.

Install Mijia App
Scan the QR code of the product or search for “Mijia” in the app store to download and install the Mijia APP; users who have installed the Mijia APP will be directed to the device connection page.

Bluetooth connection instructions

Step one:
Scan the QR code on your phone or search
for Mijia in the app market, download and
install the app and register.

Step two:
As shown in Figure 1: Long press the button for 2 seconds to turn on the device, and it defaults to 1st gear after turning on the device.
As shown in Figure 2: Insert a thin pin into the reset hole, long press the button for more than 1 second, the display “8” flashes to indicate that the Bluetooth reset is successful!

Illustration 1          Illustration 2

The third step:
Open the App, tap “+” on the home page and select “Add Device”, the App will scan the smart devices to be configured.

Add Device

1. Turn on the Bluetooth and APP permissions of your cell phone. (You need to open the necessary app permissions of Mijia APP in the settings; Android system needs to turn on both Bluetooth and GPS positioning; iOS system needs to turn on Bluetooth)
2. Open Mijia APP, when you use it for the first time, please register/login your Xiaomi account according to APP guidelines.
3.Go to the APP home page “Device”, click “+” and select “Add Device”, APP will scan the smart devices to be configured.

※If the device is not scanned, please click “Add Manually” to add the device manually according to the interface.to add the device manually.

4. In the list of scanned devices, click the device you need to add.
Connect the device according to the interface prompts.
5.After the device is bound to the cell phone, the gear can be adjusted according to the user’s own situation.

※ After adding successfully, the smart device will appear on the home page of Mijia App “Device”.
Tap the device on the home page of the App to enter the device control interface to control the device.

Tips: In the case of no obstacles: the effective transmission distance of Bluetooth connection is usually within 10 meters, we recommend you to connect and operate Bluetooth devices within 10 meters.

Thank you for your trust, and we’ll live up to your expectations.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>