Joy-it ARD-NanoV4-MC V3.0 Development Compatible Instructions

: June 25, 2024
: JOY-It

Table of Contents

GENERAL INFORMATION
DEVICE OVERVIEW
SOFTWARE SETUP
CODE EXAMPLE
INFORMATION & TAKE-BACK OBLIGATIONS
SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Joy-it ARD-NanoV4-MC V3.0 Development Compatible

GENERAL INFORMATION

Dear customer,

thank you for purchasing our product. In the following we will show you what you need to bear in mind when commissioning and using.

Should you encounter any unexpected problems during use, please do not hesitate to contact us.

The NanoV4-MC is a particularly small microcontroller and has been specially developed for working with plug-in boards thanks to the pin header that leads out at the bottom.

The integrated USB Type-C interface can be used to supply the circuit and board with power and to transfer programs to the microcontroller.

Compared to the NANO-V3, the NanoV4-MC has 2 additional IO pins and an additional hardware I2C and SPI interface in addition to the USB-C interface.
The bootloader used is compatible with most existing Arduino libraries.

DEVICE OVERVIEW

~ PWM pins

SOFTWARE SETUP

The Arduino IDE is usually used to program the board.
You can download them here: https://www.arduino.cc/en/software

Once you have downloaded and installed the software, you can start it.

Before you can load a sketch, you need to make a few settings for the board.

First add this additional board manager URL under File → Preferences:

https://mcudude.github.io/MiniCore/package_MCUdude_MiniCore_index.json

Now you can search for minicore under Tools → Board → Boards Manager… and install the MiniCore board manager from **MCUDude.

**

Now select the appropriate board: Tools → Board → Minicore → ATmega328 At Tools → Port, select the port to which your device is connected.
At Tools → Variant, select 328PB. And at Tools → Programmer select **AVRISP mkll

**

CODE EXAMPLE

To test your configuration, you can run a simple code example on your NanoV4.
to do this, open the file under File → Examples → 01.Basics → Blink Now upload the example by clicking on **Upload.

**

This example code makes the LED on the board flash.

INFORMATION & TAKE-BACK OBLIGATIONS

Our information and take-back obligations under the German Electrical and Electronic Equipment Act (ElektroG)

Symbol on electrical and electronic equipment:

This crossed-out garbage can means that electrical and electronic appliances do not belong in household waste. You must hand in the old appliances at a collection point. Before handing them in, you must separate used batteries and accumulators that are not enclosed by the old appliance.

Return options:

As an end user, you can hand in your old appliance (which essentially fulfills the same function as the new appliance purchased from us) for disposal free of charge when purchasing a new appliance. Small appliances with no external dimensions greater than 25 cm can be disposed of in normal household quantities regardless of whether you have purchased a new appliance.

Possibility of return at our company location during opening hours:
SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn

Return option in your area:

We will send you a parcel stamp with which you can return the device to us free of charge. To do so, please contact us by e-mail at Service@joy- it.net or by telephone.

Packaging information:

Please pack your old appliance securely for transportation. If you do not have suitable packaging material or do not wish to use your own, please contact us and we will send you suitable packaging.

SUPPORT

We are also there for you after your purchase. If you still have any questions or problems arise, we are also available by e-mail, telephone and ticket support system.
E-Mail: service@joy-it.net
Ticket-System: https://support.joy-it.net
Phone: +49 (0)2845 9360 – 50 (Mon – Thur: 09:00 – 17:00 o’clock CET,
Fri: 09:00 – 14:30 o’clock CET)
For further information, please visit our website:
www.joy-it.net
SIMAC Electronics GmbH
Pascalstr. 8 47506 Neukirchen-Vluyn