Joy-it RB-CaseP5-061B Raspberry Pi 5 Aluminum Case Instructions

: June 25, 2024
: JOY-It

Table of Contents

Joy-it RB-CaseP5-061B Raspberry Pi 5 Aluminum Case Instructions
Product Information
Product Usage Instructions
GENERAL INFORMATION
MONTAGE
OTHER INFORMATION
SYMBOL ON ELECTRICAL AND ELECTRONIC EQUIPMENT
RETURN OPTIONS
POSSIBILITY OF RETURN AT OUR COMPANY LOCATION DURING OPENING HOURS
RETURN OPTION IN YOUR AREA
PACKAGING INFORMATION
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Joy-it RB-CaseP5-061B Raspberry Pi 5 Aluminum Case Instructions

Product Information

Specifications

Product Name: Raspberry Pi 5 Aluminum Case
Model Number: RB-CaseP5-061B
Manufacturer: Joy-IT powered by SIMAC Electronics GmbH
Address: Pascalstr. 8, D-47506 Neukirchen-Vluyn
Website: www.joy-it.net

Product Usage Instructions

Montage

Place your Raspberry Pi 5 on top of the case and secure it with the enclosed screws.
Attach the heat sinks to your Raspberry Pi by removing the adhesive film from the thermal pads and placing the heat sinks in the designated positions.
Insert the two covers into the housing, ensuring they are correctly placed.
Fasten the covers using the provided screws on the marked points.
Connect the active cooler to the fan connection on your Raspberry Pi 5 if desired.
If not using the fan, remove the screws marked for the fan removal.
Mount the cover on the panels and secure it with screws to complete the assembly.

Other Information

Information regarding the disposal of electrical and electronic equipment as per German regulations is provided. Please follow the specified return options for old appliances.

Support

If you have any questions or encounter problems, you can contact support via email, telephone, or ticket system.

Email: service@joy-it.net
Ticket System: http://support.joy-it.net
Phone: +49 (0)2845 9360 – 50 (Mo. – Do.: 09:00 – 17:00 Uhr, Fr.: 09:00 – 14:30 Uhr)

GENERAL INFORMATION

Dear customer,
thank you for choosing our product. In the following, we will show you what you need to bear in mind during commissioning and use. Should you encounter any unexpected problems during use, please do not hesitate to contact us.

MONTAGE

Place your Raspberry Pi 5 on top and secure it with the enclosed screws:

Now attach the enclosed heat sinks to your Raspberry Pi. To do this, remove the adhesive film from the thermal pads and place the heat sinks in the following positions:

Now insert the two enclosed covers into the housing. Make sure that you place the covers on the correct side:

Then turn the housing over and fasten the two covers at the points marked below using the screws provided:

You can now connect the active cooler installed in the housing as standard or simply remove it from the housing. If you want to use the fan, connect the fan cable to the fan connection marked below on your Raspberry Pi 5:

If you do not want to use the fan, you can remove the screws marked below and thus remove the fan:

Now turn the housing over and place the cover on the two panels and mount it at the points marked below using the enclosed screws. Your housing is now fully assembled and ready for use!

OTHER INFORMATION

Our information and take-back obligations under the German Electrical and Electronic Equipment Act (ElektroG)

SYMBOL ON ELECTRICAL AND ELECTRONIC EQUIPMENT

This crossed-out garbage can means that electrical and electronic appliances do not belong in household waste. You must hand in the old appliances at a collection point. Before handing them in, you must separate used batteries and accumulators that are not enclosed by the old appliance.

RETURN OPTIONS

As an end user, you can hand in your old appliance (which essentially fulfills the same function as the new appliance purchased from us) for disposal free of charge when purchasing a new appliance. Small appliances with no external dimensions greater than 25 cm can be disposed of in normal household quantities regardless of whether you have purchased a new appliance.

POSSIBILITY OF RETURN AT OUR COMPANY LOCATION DURING OPENING HOURS

SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn

RETURN OPTION IN YOUR AREA

We will send you a parcel stamp with which you can return the device to us free of charge. To do so, please contact us by e-mail at Service@joy- it.net or by telephone.

PACKAGING INFORMATION

Please pack your old appliance securely for transportation. If you do not have suitable packaging material or do not wish to use your own, please contact us and we will send you suitable packaging.

SUPPORT

We are also there for you after your purchase. If you still have any questions or problems arise, we are also available by e-mail, telephone and ticket support system.
E-Mail: service@joy-it.net
Ticket-System: http://support.joy-it.net

Phone: +49 (0)2845 9360 – 50 (Mo. – Do.: 09:00 – 17:00 Uhr, Fr.: 09:00 – 14:30 Uhr)
For further information, please visit our website: www.joy-it.net