EUQQ YYK-520 Wireless Business Headset User Manual

EUQQ
User Manual
⸺Product description⸺

YYK-520
Wireless Business Headset

Product Photo

Pairing with Mobile/ PC/ Laptop

Turn on the Bluetooth function of the user’s mobile phone (or other bluetooth devices) to search or pair with YYK-520 headset. Once found, click on the YYK-520 to pair. (The password is 0000 if needed). After successful pairing and connection, the headset indicator light will go off, indicating that the pairing connection is successful.
Power On/Off (Switch Button)

1. Power on: Press and hold the Switch button for about 1 second until the blue light turns on, once it’s on, the red and blue lights will flash alternately. (At this state, it enters pairing mode, waiting for connection)
2. Power off: Press and hold the Switch button for 5 seconds and the red and blue flashing light will turn off.
3. Automatic Power on: Unplug the Type-C charging cable connected to the top of the headset.
4. Automatic Power on: Unplug the Type-C charging cable connected to the top of the headset.
5. Automatic Power off: The device will shut down automatically after 3 minutes without connection with any devices.
6. Automatic Power off: Place the headset back into the charging compartment and close the case.

MFB Button

| To Answer/
Hang up Call
Click on the switch
---|---
| Refuse Call
Double click on the switch
Redial
Double click on the switch
| Volume +
Click the volume + key
Next Song
Press and hold the volume + key for 1s
| Volume –
Click the volume – key
Previous Song
Press and hold the volume – key for 1s
| Third Party Call Handover
Pick up third party call:
Click on the mute button Switch between calls:
Click once on the mute button
| Hang up Third Party Call
Double-click on the mute button
Hang up Current Call
Triple-click on the mute button
| Mute Microphone
During Call
MIC OFF: Press and hold the mute button
MIC ON: Press and hold the mute button
| Activate Siri
Press and hold on the switch button for 2s, release when you hear the beep.
Deactivate Siri
Click on the switch

Product Specification

Waterproof Specification
Waterproof in daily activities (including sweating, raining, face-washing and showering, except swimming in water, etc.)

• Note that the Wireless signal of mobile phones can’t be transmitted in water.

Mobile Phone Transmission Range

The transmission distance of the mobile phone is shown in the following chart.

Attention

1. Please avoid disassemble/reassemble the product in case of failure or fire accident.
2. Please keep away from corrosive liquids to prevent the product from damage.
3. Please avoid exposure to extreme temperatures below 10℃, or above 60℃.
4. Please keep beyond the reach of kids or pets.
5. Please mind contact with sharp objects to avoid scratch.
6. Please avoid use in thundering and raining days to prevent damage or electrical shock.
7. In the case of non-use for above a month, please charge regularly for maintenance.
8. As the Wireless signal cannot transmit in water, it is not suitable for swimming for diving.

Q&A

Why is the sound of the headset quiet?****

– If the headset volume is increased to the volume limit via the headset volume + button. Please try to increase the volume via the android phone volume+ button. If you can’t increase the sound of the headphones through the volume keys of your phone, please contact us via email and we will give you a satisfactory answer.

How to connect Echo and Alexa?****

-Activate Alexa/Echo App- Setting- Add New Devices- Bluetooth – Pairing New Devices -Search Devices- YYK-520 -Pair/Connect – Play Audio

How to charge the headset?
Why cannot I detect Wireless?
Why Wireless pairing failure?****

-Connect the type C port to the top of the headset -While charging the red LED indicator light will be on, the red light will be off when the headset is fully charged.
-Place the headset back into the charging compartment.
1.The Wireless rang is 10m; please ensure no obstacles and place the mobile phone close to the headset.
2.If the headset is connected to other mobile phone or devices, please disconnect first.
3. Please reboot the Wireless device and reset the headset.

How to reset?****

– Make sure the headset is off, press and hold the Switch button for 8 seconds.

Why do the headset turn off automatically?****

– Please ensure sufficient battery level. In addition,the headset will automatically disconnect Wireless for 10mins if no device is connected.

Why cannot I recharge the headset?****

– 1.Please ensure the charging cable or charger is ina good state and with proper connection.
– 2.To ensure proper connection, press the headset to fully connect the charging points to the charging bin.
– 3.The headset charging points might be stained with dust or sweat. When place them into the charging bin for recharging, please clean with alcohol or cloth.
– 4.Please wipe the sweat on the headset before putting into the charging bin, and the indicator lights will turn on.
– 5.Once the prompt tone“Low Batteey”appears, please recharge the headset. When the number displayed by the LED lights on the charging bin reaches“10”, please recharge the charging bin. Please pay attention to not using up the battery of the headset and charging bin, as it may shorten the service life of the built-in lithium battery.

Safety Precautions

To guarantee the service life of the quality headset, please refer to the instructions as follows:

1. Please keep away from high temperature, high humidity and corrosive environment.
2. Please avoid bumping, falling, bending, soaking.
3. Please do not disassemble the headset or charging bin.
4. Please do not overcharge for a long time, which will shorten the service life.
5. In the case of feeling any discomfort or pain, please stop using the product.
6. Please use certified DC 5V-1A adaptor from manufacturer under the supervision of regulatory authorities. Repeated charging and discharging will impair the battery  erformance over time, which is normal for all rechargeable electronic products.

Packing Contents

1. Headset * 1
2. Earcaps*2
3. Type-C charging cable * 1
4. User Manual * 1
5. Charging Compartment*1

Remarks

In case of any issues not specified in here, please do not hesitate to contact us through E-mail, and we will reply within 24 hours.
Customer Service Email Address: after-service@kinganda.cn

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>