TOYOTA 2023 Prius Prime Car Installation Guide

TOYOTA 2023 Prius Prime Car

REMOVAL
CAUTION / NOTICE / HINT
HINT: Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.

COMPONENTS (REMOVAL)

PROCEDURE

1. REMOVE OUTER MIRROR

1. Apply protective tape to the areas shown in the illustration.

2. Using a moulding remover, disengage the 2 claws on the lower part of the outer mirror as shown in the illustration.

3. w/o Mirror Heater:
   Using a moulding remover, disengage the 2 claws on the upper part of the outer mirror as shown in the illustration to remove the outer mirror.
   NOTICE: Do not push the outer mirror with excessive force. Doing so may cause the actuator to come off or break the mirror surface.

4. w/ Mirror Heater:
   Using a moulding remover, disengage the 2 claws on the upper part of the outer mirror as shown in the illustration.
   NOTICE : Do not push the outer mirror with excessive force. Doing so may cause the actuator to come off or break the mirror surface.

(b) w/ Mirror Heater:

1. w/o Blind Spot Monitor System:
   1. Disconnect the connector to remove the outer mirror.

2. w/ Blind Spot Monitor System:
   1. Disconnect the connector.

3. w/ Blind Spot Monitor System:
   1. Move the grommet.

4. w/ Blind Spot Monitor System:
   1. Disconnect the connector to remove the outer mirror.

https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM41D0U&href=xhtml/RM100000002BWHF.html&locale=en&model=Priu…

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>