MTC BBS100 Bamboo Bluetooth Speaker Instruction Manual
- June 25, 2024
- MTC
Table of Contents
MTC BBS100 Bamboo Bluetooth Speaker
FAQ
- Q: How can I check the remaining battery life?
- A: The indicator light will display different colors or patterns to indicate the remaining battery life. Refer to the user manual for specific details on these indications.
- Q: What should I do if the speaker has connectivity issues?
- A: Try turning off and on both the speaker and your device’s Bluetooth. Ensure there are no obstructions between the devices and that they are within the operating distance.
It is recommended to read this user manual carefully and keep it for future reference.
Product Overview
- Speaker
- Multifunction button
- Charging port
- indicator light
Specifications
- Bluetooth version 5.0
- Charging voltage: 5V
- Lithium battery 300mAh 3.7V
- Working Time: up to 4h
- Operating distance: up to 10 meters
- Frequency: 90Hz-20KHz
- Impedance: 4ohms
- Power output: 3W
- THD: <1%
- SNR: 90dB
Operation
- Long press the multifunction button to power on the speaker.
- From the Bluetooth menu of your device, search for new devices and select “BBS100” to pair. Once they are successfully paired, you will hear a confirmation sound.
- Short press the multifunction button to change the white colour light to red, green and blue. When listening music, press again the multifunction button again and the lights will change colour in time with the beat of the music.
- Long press the multifunction button to power off the speaker.
Charging
- Use the cable provided for charging. Connect the USB cable to computer / AC adapter. Connect the micro USB end of this cable into the micro UsB port of your device.
- During charging, the red indicator light will stay on. When the speaker is fully charged the indicator light will turn off.
Troubleshooting
| Fault | Solution |
|---|---|
| Unable to pair with other devices. | 1. Check whether the speaker is still in |
the process of search or switch it off and on again.
2. There are too many Bluetooth devices in the proximity that cause difficulty in connection. Turn off other Bluetooth devices.
3. Make sure your device is in “Pairing Mode”
The sound is low or distorted.| 4. Check the Bluetooth device volume and then adjust it to an appropriate level.
5. Recharge the battery.
Occasionally the music stops.| 6.Check whether the speaker effective transmission range is exceeded or if there is an obstacle between the speaker and other Bluetooth devices.
Warnings
- Do not expose this product to rain or damp conditions.
- Prevent this item from falling as it could cause serious damage.
- Do not dismantle, repair or modify this product by yourself, contact an authorized specialist.
- In order to avoid any risk, do not dispose of this product inappropriately as there is a built-in Lithium battery.
- Clean the speaker with a dry cloth.
- Do not place this item near sources of heat or expose to direct sunlight.
- Do not insert any metal objects into this device as there is a risk of causing a short circuit in the unit.
- Keep out of reach of children.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>