Artemide LOGICO MICRO Semi Flush Mount Ceiling Light Installation Guide
- June 9, 2024
- Artemide
Table of Contents
Design: Michele de Lucchi, gerhard Reichert
LOGICO MICRO ceiling
LOGICO MINI ceiling
LOGICO ceiling
LOGICO MICRO Semi Flush Mount Ceiling Light
Note:
Prior to any work on the fixture always switch off the mains.
Attention:
Only use bulbs of the type and wattage indicated on the rating plate.
Assembly instructions.
Loosen the two screws E and remove the plate F from the lamp body D.
Make electrical connections by connecting the white wire from the fixture to
the white wire from the wall box and the fixture black wire to the black
wire. Also connect the green wire to the system ground conductor. Anchor the
plate F to the wall- -mounted box, by tightening the two kit screws. Anchor
the lamp body D to the plate F by tightening the two screws E. Loosen the lock
ring G and remove the seal H. Install the diffuser C,theseal
H and tighten the lock ring G. Insert the bulb.
Bulb:
LOGICO MICRO CEILING
max 60W G16 1/2 E12
LOGICO MINI CEILING
max 100W TYPE A19 E26
LOGICO CEILING
max 150W TYPE G30 or G40 E26
ARTEMIDE spa not shoulder any responsibilities should products be
modified without prior authorisation.
Attention: This equipment is guaranteed only when used as indicated in
these instructions. Therefore they should be kept for future reference.
In case of complaint, please quote number
via Bergamo, 18- -20010 Pregnana Milanese (Milano)- -ITALIA
tel:93.51.81- -(a ricerca automatica)
telefax 02/93.59.02.54- -93.59.04.96
sito internet http://www.ARTEMIDE.COM
codice fiscale e partita I.V.A. 00846890150
Mod. C
cod. Y503000685
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>