Tinwoo T21 Bluetooth Smart Watch User Guide
- June 12, 2024
- Tinwoo
Table of Contents
User Guide 
Thanksgiving, I met you in the years like songs. Thank you for choosing this smart watch. This watch will provide higher help and enjoyment for your exercise and health. For your convenience, please read the instructions carefully and follow the steps in the instructions.
Introduction to the whole machine
The watch is charged and activated
Before you use the watch for the first time, you need to charge to activate
the metal point attached to the back of the watch using the equipped magnetic
suction charging cable, and at the other end of the charging cable you can
connect to the USB charging head or computer USB port.
Watch client download
Scan the QR code to download and install the watch client or search for the
“GloryFit” download installation.
https://app.help-document.com/gloryfit/download/index.html
Connect the watch
This watch is a dual-bluetooth call watch, and it can be connected to dual-
bluetooth by connecting to the APP (Bluetooth on the APP and Bluetooth on the
mobile phone (audio) Open the APP and click “Device” to find the watch you
need to connect, click the watch Bluetooth name to connect, if the prompt bar
pops up, click “Pairing” or “Permission Allowed”, then you can connect
normally. Connect. Connect successfully as shown in the picture.
After the watch is successfully bound, each time the client is opened in the
future, the watch will automatically connect to the phone and the data can be
synchronized by pulling down on the client data page.
Watch operating instructions
Introduction to the call function
When your watch is connected to your phone, you can use your watch to dial- control your phone to make calls, or you can answer calls from your phone on your watch. You can also view your watch’s call history. When using the call function, you need to make sure that your watch is connected to your phone in a stable state.
Introduction to the function of the watch
Music control
While connected, the watch can control the phone music player
Motion information
The watch records and displays the number of steps you walk each day, the
calories burned, and mileage information. More detailed analysis and data
records can be viewed in the client.
Sleep
Your watch can record and show the total length of your sleep last night and
the length of your deep and light sleep. More detailed analysis and data
records can be viewed in the client.
Heart rate
The watch can record and display a heart rate of 24h throughout the day.
Click on the heart rate interface to measure the current heart rate. More
detailed analysis and data records can be viewed in the client.
Blood pressure
Click on the blood pressure interface to measure the current blood pressure
value. More detailed analysis and data records can be viewed in the client.
Blood oxygen
Click on the oxygen interface to measure the current oxygen value. More
detailed analysis and data records can be viewed in the client.
Weather information
The weather page shows the current weather, air quality information, and
tomorrow’s conditions. Weather information needs to be connected to the client
before data can be obtained, and weather information cannot be updated if
disconnected for a long time
Temperature
Switch to the temperature test interface for real-time temperature monitoring,
timely synchronization of measurement data into the APP, and test reports.
Exercise
8 sports modes to choose from, including: walking, running, cycling,
basketball, football, badminton, skipping rope, swimming. More detailed
analysis and data records can be viewed in the client.
Message push
The watch can receive notifications on the display phone, and you can set push
items on and off in the client.
Camera control
When the phone is connected, the watch can be used as a remote control for the
phone’s camera. When you turn on the camera on your phone, you can trigger the
phone’s camera door by tapping on the watch camera control page.
Other features
Other functions of the watch include stopwatch, alarm clock, timer,
brightness adjustment, vibration switch, do not disturb mode, cinema mode,
factory resumption, shutdown, about.
Basic parameters:
Connection method: Bluetooth connection
Input: 5V—500mA MAX
Device Requirements: Android 5.0 or iOS 9.0 and above
Precautions:
- It is forbidden to use an adapter with a charging voltage greater than 5V and a charging current greater than 2A, and the charging time is 2-3 hours.
- It is forbidden to charge with water stains.
- Do not disassemble the casing of this product without authorization, the product will be damaged and the warranty will be lost.
Special note:
- This product is not a medical device, the measurement results are for reference only, not as any Medical Use and Please follow the doctor’s instructions, do not rely on this test result Self-diagnosis and treatment.
- This manual is produced based on the existing information, in line with continuous improvement and continuous development The company reserves the product specification and function changes, and the description of this manual the right to make modifications and improvements to any product described.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>