HAKII Cheer Bluetooth Speakers User Manual
- June 24, 2024
- HAKII
Table of Contents
HAKII Cheer Bluetooth Speakers User Manual
THE PACKAGE CONTENT
PRODUCT OVERVIEW
POWER
Press and hold the power button for 2s to switch HAKII CHEER on. The product
indicator turns flashing white, and the HAKII CHEER is ready to be set up.
CONNECT
When the product indicator flashes white, switch on Bluetooth on your
device. Find the device list and select HAKII CHEER. The product indicator
turns solid white, a sound prompt is heard and HAKII CHEER is ready to play.
NFC FAST PAIRING
TWS PAIRING FUNCTION
Disconnecting the device. When TWO HAKII CHEER indicators flash white, press the play/pause button twice to activate/deactivate the TWS function. One of HAKII CHEER’s indicators turns solid white, a sound prompt is heard and both of them are ready to reconnect your cellphone.
Audio Control
ACTIVATE THE VOICE ASSISTANT
Long press to activate voice recognition.
SPECIFICATIONS
- Waterproof: IPX7
- Frequency response: 80Hz-20kHz
- Battery Capacity: 7.4V/2600mAH * 2
- Input voltage: DC 5V/2A
- Output voltage： DC 5V/1A
- Dimension: 213 82 81mm
- Weight: 738 g
Warning
- Please follow the instructions in this manual.
- Please use and store this product in the ambient temperature environment.
- Do not use this product near the heat source, such as a radiator, a hot air conditioner, a stove, or other instruments that produce heat.
- No matter if the product is damaged for any reason, it must be dealt with in time with the after-sales personnel of us. Any unauthorized demolition and modification will make the warranty invalid.
IMPORTANT SAFETY INSTRUCTIONS
- Do NOT make unauthorized alterations to this product.
- Use this product only with an agency-approved power supply that meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
- Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
- IPX7 is not a permanent condition, and resistance might decrease as a result of normal wear.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by HAKII could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with FCC and Industry Canada radiation exposure limits set forth for the general population. It must not be co-located or be operating in conjunction with any other antennas or transmitters.
- Model name: E30
- FCC ID: 2AI6IE30
HAKII hereby declares that this product complies with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements.
For Europe
The frequency band of operation is 2400 to 2483.5 MHz:
- Bluetooth: Maximum transmit power less than 20 dBm EIRP.
- Bluetooth Low Energy: Maximum power spectral density less than 10 dBm/MHz EIRP.
- DON’T attempt to remove the rechargeable lithium-ion battery from this product. Contact your local HAKII retailer or other qualified professional for removal.
- Please dispose of used batteries properly, following local regulations. Do not incinerate.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health and the environment. For more information on the disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
WARRANTY TERMS AND CONDITIONS
HAKII offers ONE (1) year warranty on all HAKII® products from the date of original purchase. The products should be purchased either from HAKII-owned retail stores or HAKII-authorized dealers. Proof of purchase is needed to prove the product is purchased from HAKII-authorized sales channels. HAKII offer free repair or replacement service during the warranty period.
THE FOLLOWING ARE NOT COVERED BY THE WARRANTY
- Defects that caused by not following the product’s user manual, using parts that are not made or authorized by HAKII, or using pirated software.
- Defects caused by disassembling the products by any unauthorized maintenance centre or person.
- Defects that are caused by accident or any force majeure event, such as fire, water, external extrusion force or drop, lightning, earthquake, typhoon, etc.
- Deterioration of the components or the parts used on products, the nature of which is to become worn or depleted with use, such as headphone ear pads, silicon ear tips, batteries, etc.
- Fake commodities are not covered by the warranty.
- For unspecified terms, refer to the local laws and regulations where the sales stores and dealers are located.
To claim repairs under warranty, please contact the dealers or retailers where the relevant product is purchased. To validate your warranty, you will need to provide the original sales invoice or other proof of ownership and date of purchase.