Palmer PAN01 Box Passives User Guide
- June 25, 2024
- Palmer
Table of Contents
Palmer PAN01 Box Passives
Specifications
- Product Name: PAN01 Passive DI Box
- For indoor use only
- Designed and engineered in Germany
- Assembled in P.R.C.
Product Usage Instructions
Safety Instructions
- Please read the manual carefully.
- Keep all information and instructions in a safe place.
- Follow the instructions provided in the manual.
- Use the device in the prescribed manner only.
- Do not open the device or perform any modifications.
Choking Hazard Warning: Keep out of the reach of children. The product contains small parts and packaging material that can be swallowed. Plastic bags must also be kept away from children.
Note: The shielding of the breakout cable is connected to the shielding of the Cat cable via the Cat plug and Cat socket.
CE Conformity
Adam Hall GmbH confirms that this product meets the Low-Voltage Directive, EMC Directive, RoHS, and RED guidelines.
FCC Statement
This device complies with Part 15 of the FCC Rules. It must not cause harmful interference and must accept any interference received.
UKCA Conformity
Adam Hall Ltd. declares that this product meets guidelines related to Electrical Equipment Safety Regulations, Electromagnetic Compatibility Regulations, and Radio Equipment Regulations. Contact info@adamhall.com for more details on the UKCA Declaration of Conformity.
Subject to Misprints and Errors: The product is subject to technical modifications. Contact info@adamhall.com for more information.
FAQ
- Q: Can I use the PAN01 DI Box outdoors?
- A: No, the PAN01 DI Box is designed for dry indoor areas only.
- Q : Can I connect the PAN01 DI Box to a microphone?
- A : Yes, the PAN01 DI Box can be used to connect a microphone to audio equipment.
INTENDED USE
- This product is a device for event technology, as well as studio, TV and broadcast!
- This product has been developed for professional use in the field of event technology, studio, TV and broadcast. It is not suitable for household use!
- Furthermore, this product is only intended for qualified users with specialist knowledge of event technology, as well as studio, TV and broadcast!
- Use of the product outside the specified technical data and operating conditions is considered improper use!
- Liability for damage and third-party damage to persons and property due to inappropriate use is excluded!
The product is not suitable for:
- Persons (including children) with limited physical, sensory or mental abilities or lack of experience and knowledge.
- Children (children must be instructed not to play with the product).
SAFETY INSTRUCTIONS
- Please read this manual carefully.
- Keep all information and instructions in a safe place.
- Follow the instructions.
- Use the device in the prescribed manner only.
- Do not open the device and do not perform any modifications.
CHOKING HAZARD! KEEP OUT OF THE REACH OF CHILDREN! THE PRODUCT CONTAINS SMALL PARTS THAT CAN BE SWALLOWED AS WELL AS PACKAGING MATERIAL THAT CAN BE SWALLOWED! PLASTIC BAGS MUST BE KEPT OUT OF THE REACH OF CHILDREN!
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
Our current warranty conditions and limitation of liability can be found at:
www.adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.pdfIf
service is required,
CORRECT DISPOSAL OF THIS PRODUCT
(Valid in the European Union and other European countries which mandate waste
separation) This symbol on the product or associated documents indicates that
to prevent environmental damage and personal injury through uncontrolled waste
disposal, the product must not be disposed of with normal household waste at
the end of its service life. Please dispose of this product separately from
other waste and recycle it to promote sustainable commercial activity. As a
private customer, you can obtain information on environmentally friendly
disposal options from the vendor of the product or the appropriate regional
authorities. As a commercial user, please contact your supplier and check for
any contractually agreed conditions on disposing of the equipment. This
product must not be disposed of with other commercial waste.
PLEASE NOTE:
The shielding of breakout cable is connected to the shielding of the Cat cable
via the Cat plug and Cat socket.
CE CONFORMITY
-
Adam Hall GmbH hereby confirms that this product meets the following guidelines (where applicable):
Low-Voltage Directive (2014/35/EU) -
EMC Directive (2014/30/EU)
-
RoHS (2011/65/EU)
-
RED (2014/53/EU)
For use in dry indoor areas.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation
UKCA- Conformity
- Hereby, Adam Hall Ltd. declares that this product meets the following guidelines (where applicable) Electrical Equipment (Safety) Regulations 2016 Electromagnetic Compatibility Regulations 2016 (SI 2016/1091)
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulation 2012 (SI 2012/3032) Radio Equipment
Regulations 201 7(SI 2016/2015) Adam Hall Ltd. | The Seedbed Bus. Centre | SS3
9QY Essex | UK
UKCA- Declaration of Conformity
Products that are subject to Electrical Equipment(Safety)Regulation 2016, EMC
Regulation 2016 or RoHS Regulation can be requested at
info@adamhall.com.
Products that are subject to the Radio Equipments Regulations 2017
(SI2017/1206) can be downloaded from
www.adamhall.com/compliance/
SUBJECT TO MISPRINTS AND ERRORS, AS WELL AS TECHNICAL OR OTHER MODIFICATIONS!
INTRODUCTION
A DI box (Direct Injection) serves the purpose of connecting instruments with an electric output directly to the microphone input of a mixer or stage box, bypassing the acoustic signal chain (instrument – loudspeaker – microphone). Beyond adjusting the signal level, a DI box also balances the signal and lowers its impedance. This ensures the signal is less susceptible to interference and cable losses. Palmer DI boxes incorporate audio transformers, guaranteeing galvanic isolation between the input and output. It is important to note that a passive DI box should not be used for galvanically isolating a line signal, as the transfer ratio is not 1:1 in such cases. Instead, opt for a line isolation box like Palmer’s RIVER supper, kill, and Iller.
CONNECTIONS
Connect the unbalanced output of your instrument to the input of the PAN01 using a shielded jack cable. This input signal is directly looped to the THRU connector, meaning you can pass the uncharged original signal on to a further device (e.g., to connect the instrument to an amplifier). The XLR/m output named “Balanced Out” should be connected to the microphone input of a stage box or mixer using a balanced, shielded microphone cable
ATTENUATOR
This switch allows for a 30dB reduction of the input signal. Use the 0dB
setting for all signals with a level of +6dBu (line level). For stronger
signals or when using the DI box between an amplifier and a speaker, employ
the -30dB setting. Generally, use the Attenuator switch in such a way, that
the microphone input receives an appropriate signal.
GROUND LIFT SWITCH
As stated above, the PAN01 achieves galvanic isolation between input and
output (galvanic isolation means there is no conducted connection; the signal
is transferred on the basis of magnetic induction), preventing ground loop hum
caused by double grounding (e.g., when a mains- powered instrument or
amplifier is connected to a mixer). Despite galvanic isolation, occasional hum
loops or noise may arise due to unintended earthing issues. The ground lift
switch interrupts the earth connection, minimizing ground loop interference.
So if there is an audible hum in the signal, press the ground lift switch. In
general, lift the ground when connecting two mains-powered devices and do not
lift the ground when dealing with a battery-powered device.
CONTACT
- Adam Hall GmbH, Daimlerstraße 9, 61267 Neu Anspach
- E-mail Info@adamhall.com
- +49 (0)6081 / 9419-0
- Palmer® is a registered brand of the Adam Hall Group
- Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany Adam Hall Ltd. | The Seedbed Bus. Centre | SS3 9QY Essex | UK
- info@adamhall.com
- adamhall.com
Designed and engineered in Germany, assembled in P.R.C.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>