FISHER AND PAYKEL RF170 2×32 Inch Suround kit for Dual Install Freestanding Refrigerator Freezer User Guide
- June 24, 2024
- FISHER and PAYKEL
Table of Contents
FISHER AND PAYKEL RF170 2×32 Inch Suround kit for Dual Install
Freestanding Refrigerator Freezer
Product Usage Instructions
- Ensure that the space for installation is suitable for the dimensions mentioned above.
- Unpack the stainless steel surround kit carefully to avoid any damage.
- Place the refrigerator-freezers in the designated position for the dual installation.
- Attach the surround kit securely around the two 32-inch wide refrigerator-freezers.
- Verify that the installation is stable and level to prevent any imbalance issues.
- Refer to the user manual of the refrigerator-freezers for further operational instructions.
FAQ
- Q: Can this surround kit be used with any other refrigerator models?
- A: This surround kit is specifically designed for use with two 32-inch wide freestanding refrigerator-freezers, compatible with 2x RF170. It may not be suitable for other models.
- Q: How can I contact Fisher & Paykel’s Customer Care Centre for assistance?
- A: You can reach Fisher & Paykel’s Customer Care Centre at T 1.888.936.7872 or visit their website at www.fisherpaykel.com for support available 24 hours a day, 7 days a week.
- Q: Is professional installation recommended for this product?
- A: While installation instructions are provided, professional installation may ensure optimal setup and performance. It is recommended to consult with a qualified technician if needed.
Stainless steel surround kit for a dual install of two 32″ wide freestanding refrigerator-freezers. Compatible with 2x RF170
DIMENSIONS
| Height | 70 1/2 – 71 1/8″ |
|---|---|
| Width | 70″ |
| Depth | 27 9/16″ |
SPECIFICATIONS
Product dimensions
| Depth | 27 9/16″ |
|---|---|
| Height | 70 1/2 – 71 1/8″ |
| Width | 70″ |
| SKU | 24476 |
| --- | --- |
The product dimensions and specifications on this page apply to the specific product and model. Under our policy of continuous improvement, these dimensions and specifications may change at any time. You should therefore check with Fisher & Paykel’s Customer Care Centre to ensure this page correctly describes the model currently available. Fisher & Paykel Appliances Ltd 2020
Where applicable
- All appliances use energy, and energy usage typically generates carbon emissions.
- Fisher & Paykel Appliances’ In-use Energy Carbon Emissions Estimate indicates carbon emissions from a product’s in-use energy.
- This is calculated either annually or per cycle, using the product’s market-specific energy label energy consumption data multiplied by the carbon emissions factor for energy in your country or region.
- Our In-use Energy Carbon Emissions Estimate is designed to assist customers in making informed purchasing decisions when comparing different Fisher & Paykel products.
- For example, a heat pump dryer typically has a lower In-use Energy Carbon Emissions Estimate than a vented dryer.
A PEACE OF MIND SALE
- 24 Hours 7 Days a Week Customer Support
- T 1.888.936.7872 W www.fisherpaykel.com
Read User Manual Online (PDF format)
Loading......