PRANITE Pipe Inspection Camera User Manual

: June 7, 2024
: PRANITE

PRANITE Pipe Inspection Camera

WELCOME Congratulations on your purchase of our inspection video camera. Before use, please read the instructions carefully. This product is designed as a utility class equipment, appropriate for use in surveying pipes or other hard-to-reach places, equipment or furnishing installation, car repair, etc. If you have any question, contact our customer service center:
Email at: support@hbudsshop.com
or visit: http://@hbudsshop

PRECAUTIONS

Handle it carefully during operation, avoid dropping or apply heavy pressure over it.
If the users disassemble or deliberately damage the unit, it will be beyond the Warranty contract.
Do not bend the fiber optic cable at 90 degrees or greater.
Power off the display and disconnect all the data connections after use.
Save your data before inserting MicroSD card into the device.
Do not suddenly cut power while operating or you might corrupt your memory card.

ACCESSORIES LIST

Cable
Camera Probe
Power Adaptor
Monitor
Battery
Carrying Case
Protective Cover
Connector
Screwdriver
8GB Micro SD Card

SPECIFICATIONS

Camera and Battery Specs.

tabel 1

LCD Monitor Specs

table 2

POWER SUPPLY DIAGRAM

PRODUCT INSTALLATION

Plug the video data input cable (yellow) from monitor to battery. Plug in video power input (black) from monitor to battery.
Plug 3-way splitter data cable into the battery with same color corresponding from cable to battery and plug in the end cable into the back end of the push-rod cable.
Insert camera head into the cable data point and twist to the right to tighten the camera.
Turn the power switch from battery to ON.
Turn the light adjustment knob to adjust the LED lights from the camera head.
Press the power button on the monitor to power on the display.

HOW TO CHARGE

Connect the power adaptor to the CHARGER port of battery to power outlet. Full charges take 5 hours.
When the power adaptor LED is lit red it means it’s charging and when it turns green indicates that battery is fully charged.

MONITOR INTERFACE DIAGRAM

table 3

Recording:

1. Press “REC/-” to start recording and press again to stop and save recording.
2. Press menu, press menu again to scroll down to Video Setting. Press “-” or “+” switch to sub menu. Press “PLAY/+” to select and you have option to Record/ Play/ Format.

Playback:

Press “PLAY/+” to enter your recording files and press “-” “+” to browse between files. Once file is selected press play to start playback and again to pause playback.

Take photo/view image:

Press “menu” to enter menu setting, press menu three times again to switch to “photo setting”. Then press “-” or “+” to move up and down in sub menu, you can choose picture view/take photo/delete all (delete all picture). Press “PLAY/+” to confirm.

SD card:

SD card slot is on left side of the monitor (8GB SD card included). Press both buttons on the sides of the monitor to detach. Once detached you have access to insert SD card into the monitor.

Set brightness/ chroma/ contrast of screen:

Press menu, press “-” or “+” to move up and down, press “PLAY/+” or “REC/-” to increase or decrease numerical value.

Change Language/ Rotate:

Press menu, press again to switch to “System setting”, and then press “-” or “+” switch to sub menu up, you can choose Language/ Rotate. Use “PLAY/+” to change language, or rotate screen orientation

Set Date/ Time:

Press menu to enter menu, press menu again until highlight “Time setting”. Press “PLAY/+” to choose value, and then press “-” or “+” adjust the value.