ALPHAREV R208MINI Remote Control Boat Instruction Manual

ALPHAREV R208MINI Remote Control Boat

WARNING

1. This product is suitable for people aged over 8. It must be operated under the supervision of an adult.
2. When the boat is sailing, it must be ensured that there is no one in the area. There should be no aquatic or debris in the water to prevent the propeller from being hooked or damaging the boat.
3. This product has some small parts. Do not swallow to avoid the risk of suffocation.
4. Please keep a certain distance from the high-speed rotating propeller to avoid the danger of ground injury.
5. The motor is a high-temperature component. Do not touch it to avoid the danger of burns.
6. Check whether the USB cable and other parts are damaged regularly. If it is damaged, stop using it until repaired.
7. When the boat model is sailing, please pay attention to safety first If you lose control of the boat model, you must choose a safe and reliable method to retrieve it. The operator must not retrieve the boat model from the water without safety protection.

REMOTE CONTROL BATTERY INSTALLATION

Steps to insert the battery:

• Please remove the battery box on the back of the remote control, and then insert 2xAA (LR6/R6) alkaline batteries.
• Pay attention to the polarity mark in the battery box (batteries must be purchased separately).

CHARGING BATTERIES

Connect the battery and USB charging cable, and then plug the USB plug into the computer or power adapter socket.

Note: The red indicator light is on when charging; the red indicator light is off when the charging is completed. The charging time is about 90 minutes. Please charge within sight, and disconnect the charging cable when charging is complete.

Battery warning:

• The battery must be installed according to the correct polarity.
• Do not mix new and old batteries.
• Do not mix alkaline, standard (carbon-zinc. or rechargeable nickel-cadmium) batteries.
• Non-rechargeable batteries cannot be charged.
• Rechargeable batteries must be charged under adult supervision.
• The power terminals must not have any short-circuit phenomenon.
• Do not connect more than a certain number of power sources.
• Please be sure to use the USB charging cable delivered by our company to charge the original battery, otherwise, we will not be responsible for all the consequences.
• The exhausted battery should be removed from the tov

INSTALLATION STEPS OF CABIN BATTERY

1. Open the boat cover through the lock catch.
2. Install the battery and clamp the battery in the card slot.
3. Tightly lock the boat hatch.

LINKING BEFORE MANIPULATION

After installation of battery, put the boat into the water (note: the ship needs to be in the water to be connected to electricity), at this time, turn on the remote control, and the LED power indication on the remote control flashes. When the LED lights stop flashing, the connection is completed. You can start to control now.

MAINTENANCE

1. When the hull is finished sailing, please take out the lithium battery from the hull.
2. The hull surface should avoid prolonged exposure to the sun to eliminate the situation of paint peeling. After use, wipe the hull clean with a dry cloth.
3. If this product is not going to be used for a long time, please remove the control battery to avoid battery leakage, thus avoiding damaging the remote controller.

REMOTE CONTROL INSTRUCTIONS

1. FORWARD AND BACKWARD

2. TURN LEFT AND TURN RIGHT

3. LEFT FINE-TURNING BUTTON
   When the sailing boat automatically deflects to the right, please turn the rudder trim to left side, the boat will return to the left side until a direct drive is achieved.

4. RIGHT FINE-TURNING BUTTON
   When the sailing boat automatically deflects to the left, please turn the rudder trim to right side, the boat will return to the right side until a direct drive is achieved.

RSS AND FCC

RSS:

CAN ICES-003(B)/NMB-003(B) |

This device contains license-exempt transmitter(s)/receiver(s)that comply with the Innovation, Science and Economic Development of Canada’s license exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

“FCC:

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be detected by turning the equipment off and on, the user is encouraged to try to remedy the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver. Connect the Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or experienced radio/TV technician for help.

CONTACT INFORMATION

• BRAND: ALPHAREV
• PRODUCT NAME: REMOTE CONTROL BOAT
• MODEL NUMBER: R208MINI
• FCC ID: 2AWZK-2008
• BATCH NUMBER: ARV-06012022
• MANUFACTURER NAME: SHANTOUSHI CHENGHAIQIU XIONGMUWANJIASHANGHANG
• MANUFACTURER ADDRESS: BLDG4, NO.3-2,XX RD,CH STR.,CHENGHAI, SHANTOU,CN,515800
• DISTRIBUTED BY: XIONGMU INC
• DISTRIBUTOR ADDRESS: 1942 Broadway St., STE 314C BOULDER CO 80302
• EMAIL: SUPPORT@ALPHAREVRC.COM
• TEL: +1(833)633-0090

FREQUENTLY ASKED QUESTIONS

What are the dimensions and weight of the ALPHAREV R208MINI Remote Control Boat?

The ALPHAREV R208MINI measures 15.83 x 7.44 x 6.77 inches and weighs 2.14 pounds.

What is the maximum speed of the ALPHAREV R208MINI Remote Control Boat?

The boat can reach speeds of over 20 miles per hour (20+ MPH).

What type of batteries does the ALPHAREV R208MINI Remote Control Boat use?

It requires 1 Lithium Ion battery for operation.

How does the remote control system work for the ALPHAREV R208MINI?

The boat operates on a 2.4GHz remote control system, offering precise handling.

What makes the ALPHAREV R208MINI suitable for remote control enthusiasts?

It combines high speed capabilities with easy maneuverability, ideal for hobbyists.

How much does the ALPHAREV R208MINI Remote Control Boat cost?

The price for the ALPHAREV R208MINI is $49.99.

What frequency does the ALPHAREV R208MINI Remote Control Boat operate on?

It operates on the 2.4GHz frequency.

What are the main features of the ALPHAREV R208MINI Remote Control Boat?

The boat is known for its fast speeds, easy remote control operation, and durable design.

Why is the ALPHAREV R208MINI Remote Control Boat not responding to the remote control?

Ensure the remote control has fresh batteries and is turned on. Check for any interference or obstructions between the remote and the ALPHAREV R208MINI Remote Control Boat. Ensure the boat and remote are correctly paired.

How can I reset the ALPHAREV R208MINI Remote Control Boat if it freezes?

To reset the ALPHAREV R208MINI Remote Control Boat, turn off both the boat and the remote control. Wait for a few seconds, then turn them back on. This should reset the connection and resolve any freezing issues.

What should I do if the ALPHAREV R208MINI Remote Control Boat's movements are erratic?

Check the water surface to ensure it is suitable for operation. Inspect the propeller and rudder of the ALPHAREV R208MINI Remote Control Boat for any debris or obstructions that might be causing erratic movements.

Why is the ALPHAREV R208MINI Remote Control Boat making unusual noises?

Unusual noises from the ALPHAREV R208MINI Remote Control Boat could indicate a low battery. Recharge the lithium-ion battery fully. If the noise persists, check for any loose parts or debris caught in the propeller.

How can I fix the ALPHAREV R208MINI Remote Control Boat if it is not charging?

If the ALPHAREV R208MINI Remote Control Boat is not charging, ensure the charger is properly connected to both the boat and the power outlet. Check the charger and battery for any visible damage. If the issue continues, try using a different charger compatible with the lithium-ion battery.

What should I do if the ALPHAREV R208MINI Remote Control Boat's LED indicators are not working?

Verify that the battery is fully charged. If the LED indicators on the ALPHAREV R208MINI Remote Control Boat are still not working, it might be a loose connection inside the device.

How can I improve the battery life of the ALPHAREV R208MINI Remote Control Boat?

To improve the battery life of the ALPHAREV R208MINI Remote Control Boat, ensure you fully charge the battery before each use and avoid overcharging. Turn off the boat when not in use to conserve battery power.

VIDEO – PRODUCT OVERVIEW

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>