AXXESS AXUSB-CBL Update Cable Instructions
- June 22, 2024
- AXXESS
Table of Contents
AXXESS AXUSB-CBL Update Cable
Product Information
- Product Name: AXUSB-CBL
- Manufacturer: Axxess
- Compatibility: Axxess interfaces
- Connection: USB to 4-pin serial port
Product Usage Instructions
Installation Instructions:
- Download the webxxpress updater program from www.axxessinterface.com.
- Run the webxxpress program by double-clicking the icon on your desktop. For Windows Vista users, right-click and select “run as administrator.”
- Connect the AXUSB-CBL to your computer and follow the prompts to install drivers (if necessary).
- Open the USB bootloader program from the start menu.
- Open the Axxess interface box to access the 4-pin serial port on the circuit board.
- In the USB bootloader program, click “update unit board” and plug the AXUSB-CBL into the 4-pin serial port of the Axxess interface to begin updating.
Frequently Asked Questions
Q: Do all computers require driver installation for AXUSB-CBL?
A: Not all computers will need to install drivers for the AXUSB-CBL. It depends on the system's compatibility and existing drivers.
Q: How can I check if my Axxess interface needs an update?
A: You can use the USB bootloader program and follow the instructions provided to check and update the Axxess interface board using AXUSB-CBL.
Q: Can I use AXUSB-CBL with other devices apart from Axxess interfaces?
A: No, the AXUSB-CBL is specifically designed for use with Axxess interfaces and may not be compatible with other devices.
For installation and operation instructions. please go to: www.axxessinterfaces.com and click on the “Firmware Download” tab.
Using Instruction
-
Download the webxxpress updater program from www.axxessinterface.com.
-
Once downloaded double click the webxxpress program icon located on your desktop and follow prompts.
Note: For Windows Vista users right click on the icon and click “run as administrator”. -
Once installed connect the AXUSB-CBL to your computer (sold separately) and follow the prompts to install drivers. (Note: not all computers will need to do this).
-
Once drivers are installed open the USB bootloader program which is located in the “all program” section of your start menu.
-
Open up the Axxess interface box that needs to be updated to access the 4-pin serial port on the circuit board.
-
With the USB boot loader program opened, click “update unit board”. When prompted, plug the AXUSB-CBL into the 4-pin serial port of the Axxess interface and the board will begin to update to the latest version.
Integrate
AxxessInterfaces.com
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION.
References
- Axxess Integrate - Comprehensive Interface Products for Vehicle Upgrades
- Axxess Integrate - Comprehensive Interface Products for Vehicle Upgrades
- Axxess Integrate - Comprehensive Interface Products for Vehicle Upgrades
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>