OPPO SM-2926 Bluetooth Headphones and Microphone Instruction Manual

Oppo Bluetooth Headphones and Microphone
Instruction Manual
Item: SM-2926 Model: XO-9902

SM-2926 Bluetooth Headphones and Microphone

Functions:

1. Vol -/ Previous Track
2. Play/Pause/Answer/Reject
3. Vol +/ Next Track
4. LED Indicator
5. Type C Input
6. 3.5mm Aux Input
7. Microphone

What’s included:

• 1 x Bluetooth Headphones
• 1 x USB to Type C Charging Cable
• 1 x Instruction Manual
• 1 x 3.5mm Aux Cable

Tech Specifications:

• Playing Time: 4 hours (at max volume)
• Charging Time: 2-3 hours
• Pairing Name: “Oppo Bluetooth Headphones”
• Battery: 3.7V/200mAh Li Polymer

Instructions:

1. Charging the Earbuds:
   ● Connect the provided USB cable to a regulated USB adapter. Connect the Type C end of the cable to the charging port of the headphones(5).
   ● LED indicator will turn RED when charging, once fully charged LED will turn OFF.

2. Bluetooth® Connection:
   ●  Press and hold Multifunction Button(2) to turn ON the headphones, headphones will prompt and LED Indicator will flash RED and BLUE when in pairing mode.
   ●Turn on the Bluetooth function on mobile device, Select “Oppo Bluetooth Headphones” pairing name.
   ● Headphones will prompt and LED will slowly flash BLUE if successfully paired.
   ● Headphones will automatically turn OFF after 5 minutes if not connected to bluetooth.

3. Call Controls:
   ● When receiving a phone call, press the multifunction button to answer and press again to end call.
   ●  Long press the multifunction button to feject a phone call.
   ● Double press Vol+/Next Track(3) to activate voice AssistanvSiri.

4. Music Controls:
   ● Single press Multifunction button to Play/ Pause audio.
   ● Short press Vol+/Next Track(3) to increase volume.
   ● Long press Vol+/Next Track(3) to skip to the next track.
   ● Short press Vol-/Previous Track(1) to decrease volume.
   ● Long press Vol-/Previous Track(1) to skip to previous track.

5. Aux Connection:
   ● Connect the provided 3.5mm Aux cable to the 3.5mm Aux Input of the headphones and mobile device to play music directly.

SAFETY PRECAUTIONS:

WARNING -When using this product, basic precautions should always be followed:

1. Read all the instructions before use.
2. Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C).
3. The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles.
4. Do not expose the device to moisture.
5. Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury.
6. Do not use the device if damaged or modified.
7. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
8. Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury.
9. Do not expose the device to fire or excessive temperature.
10. To reduce the risk of injury, close supervision is required when the product is used near children.
11. Ensure that qualified service professionals use only identical replacement parts to ensure product safety

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Recrient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

IC Statement

This device contains licence-exempt transmitter (s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2.  This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency Exposure Statement for IC: This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment can be used in portable exposure conditions.
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with
Canadian ICES-003.

FCC ID: 2ADK3-9902
IC :27880-9902
Name of the Distributor:
Bulletline Inc
Address of the Distributor:
6301 East 10th Avenue, Suite 110
Hialeah, FL 33013 USA.www.fcs.org

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>