CONCEPTRONIC POLONA04BA Bluetooth Audio Adapter Included Installation Guide

CONCEPTRONIC POLONA04BA Bluetooth Audio Adapter Included

Product Specifications

• Model: POLONA04B / POLONA04BA
• Bluetooth: Yes
• Power Switch: Yes
• Volume Control: Yes
• Mute Button: Yes

Product Usage Instructions:

Pairing:
To pair the Bluetooth audio adapter (POLONA04BA) with your device:

1. Push the power switch to ON.
2. Search for the device on your phone or other compatible devices.
   Connect to the device when it appears in the list of available devices.

Charging :

To charge the Bluetooth audio adapter:

1. Use the provided USB charger or cable to charge the device.
2. Ensure not to use a damaged charger or cable to prevent fire hazards.

Product Overview:

The device includes the following features:

• 1: Power switch
• 2: Play/Pause button
• 3: Volume +
• 4: Volume
• 5: Mute button

Frequently Asked Questions (FAQ):
Q: Where can I find support for my Conceptronic product?
A: For support, visit www.conceptronic.net and click on ‘Support’. If you have further questions, contact support@conceptronic.net

Quick Installation Guide

PRODUCT OVERVIEW

1. Power switch
2. Play/Pause
3. Volume +
4. Volume –
5. Mute button

Congratulations on the purchase of your Conceptronic POLONA04B/ POLONA04BA. When problems occur, we advise you to visit our support site (go to http://www.conceptronic.net and click on ‘Support’). If you have other questions about your product and cannot find it on our website, please contact us via email: support@conceptronic.net
For more information about Conceptronic products, please visit the Conceptronic website: www.conceptronic.net.

Safety & Warnings instructions:
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

• Keep the device away from water, humidity, fire or hot environments.
• Keep your device and all its parts and accessories out of the reach of small children.
• Do not leave the packaging material lying around carelessly. This may become dangerous playing material for children.
• Avoid dropping, throwing or crushing the device.
• Do not open, change or damage the device.
• Do not use a damaged USB charger or cable to charge the device. Using an improper charging method may result in fire or explosion.
• Do not recharge batteries near a fire or in extremely hot conditions.
• Observe signs and notices that prohibit or restrict the use of electronic devices.
• Turn off your device in any location where instructed to do so.
• Do not listen to music at an excessive volume for prolonged periods. This can lead to hearing damage.
• Unplug all cables and turn your device off before cleaning.

Disposal of waste electrical equipment and batteries: Do not dispose of waste electrical equipment and batteries with household waste. Please hand them to your local recycling point. Batteries should be fully discharged when disposed of. Incorrect
storage/disposal can harm the environment and/or cause injury.
CE marking: Conceptronic declares that this product complies with the directives listed in the section ‘Declaration of Conformity’.

Installation & usage

• A prompt tone will sound when the volume is at its maximum or minimum.

LED indicator:

“Toot” sound every 60 seconds.

Double connection

1. Pair with the first mobile phone A.
2. Turn off the Bluetooth on mobile phone A, and the product will automatically enter pairing mode.
3. Search for and connect with the second mobile phone B.
4. Manually reconnect with the first phone A, so that the Bluetooth headset connects the two phones.

Automatic reconnection:

1. When the headset is turned on, it can automatically connect to the last paired phone.
2. If the connection between the product and the mobile phone is lost due to exceeding the normal distance, it will return to the normal communication distance within about 5 minutes, and the headset will automatically connect to the newly paired mobile phone.

Line-in input:
When the headset is switched on, it automatically connects in Bluetooth mode. However, if the headset is plugged in using the Line-in connection, it will prioritize playing Line-in audio.

Exiting pairing mode:
(After the headset automatically powers off, the switch should be returned to the OFF position and then pushed to ON to restart the headset)
If there is no connection during boot in pairing mode, the headset will exit the pairing mode after 5 minutes, enter standby mode, and automatically shut down after 5 minutes.

Clear pairing:
In standby state, long press “ and “▲” for about 5 seconds to clear the pairing information. After clearing the pairing, the product will automatically enter the pairing state with prompt tone.

Charging:
After powering on, plug in the charging cable, and the headset will automatically shut down for charging.
Charging voltage: 5V, Charging time: 2h ± 0.5h

Bluetooth Audio Adapter (POLONA04BA):

1. Put the Bluetooth audio adapter into a computer, the device will appear as “POLONA04”, it will power on and enter ‘re-connect mode’. A blue light will flash once every 5 seconds.
2. Power on the headset. After it has connected successfully, a blue light will switch on.
3. If there is no connection after about 10 seconds, it will enter ‘searching and pairing mode’ (Red and blue lights flash alternately).

Specification

Digital Data Communications GmbH – Im Defdahl 10 F, 44141 Dortmund, Germany CONCEPTRONIC® is a registered trademark of Digital Data Communications GmbH © Copyright Digital Data Communications GmbH. All Rights Reserved.

References

• Home - Conceptronic

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>