CLOCKAUDIO CUT-4 Logic Interface Touch Switches Instruction Manual
- June 21, 2024
- CLOCKAUDIO
Table of Contents
CUT-4 Logic Interface Touch Switches
Instruction Manual
CUT-4 Logic Interface Touch Switches
This guide is intended to help you get started quickly. It is not a substitute
for the full manual which contains detailed information.
INSTALLING TOUCH SWITCHES
Clockaudio Touch Switches can be used to mute microphones via DSPConnect up to
4 Touch Switches to the 4 TS ports (one Touch Switch per TS Port) with a
standard CAT5 cable.
INSTALLING ARM-C
The ARM-C port is used to control motorized boundary microphones.
Connect an ARM-C device to the the ARM-C port with a standard RJ12 cable.
CONNECTING POWER
Connect power to the CUT-4 using an external 12VDC power supply (see user
guide for polarity). Data and power can be daisy chained for ease of
installation.
DAISY CHAINING POWER AND DATA
Connect the first unit to an external power supply. Connect the OUT terminal
block on unit one to the IN terminal block on unit 2.
Continue for up to 6 total units.
To daisy chain CUT-4 units, connect Port 2 on unit one to Port 1 on the second
unit. Continue for up to 6 total units.
CONNECT TO A NETWORK
Using either PORT 1 or PORT 2, connect the CUT-4 to a gigabit switch that is
connected to the network.
Ensure there is a DSP unit also connected to the network for audio
output.
SETUP WITH CLOCKAUDIO CONTROL PANEL
Use the Clockaudio Control Panel application (Windows only) to configure
additional settings such as control IP address and more. It can also be used
to test Touch Switches and LED’s.
Download the application from www.clockaudio.com
or scan the QR code on this page.
MOUNTING DIAGRAM
FULL MANUAL AND
WINDOWS SETUP APPLICATION
Scan the code to go directly to the CUT-4 product page with detailed User
Guide and Clockaudio Control Panel application.
Documents / Resources
|
CLOCKAUDIO CUT-4 Logic Interface Touch
Switches
[pdf] Instruction Manual
CUT-4 Logic Interface Touch Switches, Logic Interface Touch Switches,
Interface Touch Switches, Touch Switches, Switches
---|---