MAXIM LIGHTING 52034 Spec LED 30 Inch Satin Nickel Bath Vanity Light Wall Light User Manual
- June 21, 2024
- MAXIM LIGHTING
Table of Contents
- MAXIM LIGHTING 52034 Spec LED 30 Inch Satin Nickel Bath Vanity Light Wall
- Before Getting Started
- Risk of suffocation!
- Lamp Care Instructions
- caution there is a risk of shock!
- Cleaning & Maintenance
- PARTS
- IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC
- VERIFIED LIST OF TESTED DIMMERS
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MAXIM LIGHTING 52034 Spec LED 30 Inch Satin Nickel Bath Vanity Light Wall
Light User Manual
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a box knife, be careful not
to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of children.
Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
Ensure that you have all required contents forcomplete assembly.
Take care when lifting. Assemble the product in close proximity to where you
intend to install it.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep packaging materials away from children
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the product.
caution there is a risk of shock!
Disconnect from power source before assembling or cleaning.
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Check the product cord to be sure is free torn or frayed.
WARNING: Wires must to be connected to low Lll voltage driver and should not be connected directly to live wire or a short may occur.
Cleaning & Maintenance
On polished finishes, often using talc powder can reduce the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass
cleaner, stone polish, & wood polish.
Clean with soft cloth and a mild detergent. Do not use abrasive or harsh
cleaners. Periodically (every 90-180 days) make sure that the screws are fully
tightened. Prolonged exposure to heat sources may cause glazing,
meltingandscorching, or even cause color to fade
PARTS
Before getting,started,ensure the package contains the following components:
This fixture is equipped with an LED driver, please refer to the Wiring
Diagram for more details
Ce luminaire est équipé d’un pilote a LED, veuillez vous référer au Schéma De
Câblage pour plus de détails
Este accesorio está equipado con un controlador LED, por favor consulte el
Diagrama De Cableado para obtener más detalles.
IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC
DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH
DO NOT CUT FACTORY-MADE CONNECTIONS.